Honda Ridgeline (2022 year). Manual in english - page 28

447

Honda Sensing

Adaptive Cruise Control (ACC)

Continued

Driving

Determine the most appropriate following-interval setting based on your specific
driving conditions. Be sure to adhere to any following-interval requirements set by
local regulation.

The higher your vehicle’s following-speed is, the longer the short, middle, long or
extra long following-interval becomes. See the following examples for your
reference.

Following-interval

When the Set Speed is:

50 mph (80 km/h)

65 mph (104 km/h)

Short

83 feet

25 meters

1.1 sec

100 feet

31 meters

1.1 sec

Middle

110 feet

33 meters

1.5 sec

137 feet

42 meters

1.5 sec

Long

154 feet

47 meters

2.1 sec

200 feet

61 meters

2.1 sec

Extra
Long

204 feet

62 meters

2.8 sec

265 feet

81 meters

2.8 sec

Honda Sensing

Adaptive Cruise Control (ACC)

448

Driving

To cancel ACC, do any of the following:

•

Press the

CANCEL

button.

•

Press the

MAIN

button.

ACC indicator goes off.

•

Depress the brake pedal.

■

Automatic cancellation

The beeper sounds and a message appears on the multi-information display when
ACC is automatically canceled. Any of these conditions may cause the ACC to
automatically cancel:

•

Bad weather (rain, fog, snow, etc.).

•

When the radar sensor behind the emblem gets dirty.

•

The vehicle ahead of you cannot be detected.

•

An abnormal tire condition is detected, or the tires are skidding.

•

Driving on a mountainous road, or driving off road for extended periods.

•

Abrupt steering wheel movement.

•

When the ABS, VSA

, or CMBS

is activated.

•

When the ABS or VSA

system indicator comes on.

•

When you manually apply the parking brake.

•

When the detected vehicle within the ACC range is too close to your vehicle.

•

The camera behind the rearview mirror, or the area around the camera, including
the windshield, gets dirty.

■

To Cancel

To Cancel

Resuming the prior set speed: After you have
canceled ACC, you can resume the prior set speed
while it is still displayed. Press the

RES/+

button

when driving at a speed of at least 25 mph (40 km/h)
or more.

The set speed cannot be set or resumed when ACC
has been turned off using the

MAIN

button. Press

the

MAIN

button to activate the system, then set the

desired speed.

MAIN

Button

CANCEL

Button

Automatic cancellation

Even though ACC has been automatically canceled,
you can still resume the prior set speed. Wait until the
condition that caused ACC to cancel improves, then
press the

RES/+

button.

Continued

449

Honda Sensing

Adaptive Cruise Control (ACC)

Driving

Press and hold the Interval button for one
second.

Cruise Mode Selected

appears on

the multi-information display for two seconds,
and then the mode switches to Cruise.
To switch back to ACC, press and hold the
Interval button again for one second.

■

When to use

Desired speed in a range above roughly 25 mph (40 km/h).

Take your foot off the pedal and press the

–/SET

button when you reach the desired

speed.
The moment you release the

–/SET

button, the set speed is fixed, and cruise control

begins. The

CRUISE CONTROL

indicator comes on.

Each time you press the

RES/+

–/SET

button, the vehicle speed is increased or

decreased by about 1 mph (1.6 km/h).
If you keep the

RES/+

–/SET

button pressed, the vehicle speed increases or

decreases until you release it. This speed is then set.

■

To Switch ACC to Cruise Control

To Switch ACC to Cruise Control

Always be aware which mode you are in. When you
are driving in Cruise mode, the system will not assist
you to maintain a following-interval from a vehicle
ahead of you.

You can switch the displayed set speed
measurements on the audio/information screen
between mph and km/h.

Customized Features

P. 298

ACC ON

Cruise
Control ON

Interval
Button

■

To Set the Vehicle Speed

■

To Adjust the Vehicle Speed

Honda Sensing

Adaptive Cruise Control (ACC)

450

Driving

To cancel cruise control, do any of the following:

•

Press the

CANCEL

button.

•

Press the

MAIN

button.

•

Depress the brake pedal.

The

CRUISE CONTROL

indicator goes off.

■

To Cancel

To Cancel

Resuming the prior set speed:
After cruise control has been canceled, you can still
resume the prior set speed by pressing the

RES/+

button while driving at a speed of at least 25 mph (40
km/h) or more.

You cannot set or resume in the following situations:

•

When vehicle speed is less than 25 mph (40 km/h).

•

When the

MAIN

button is turned off.

At vehicle speeds of 22 mph (35 km/h) or less, cruise
control is canceled automatically.

451

Honda Sensing

Lane Keeping Assist System (LKAS)

Continued

Driving

Lane Keeping Assist System (LKAS)

Provides steering input to help keep the vehicle in the middle of a detected lane and
provides tactile and visual alerts if the vehicle is detected drifting out of its lane.

Lane Keeping Assist System (LKAS)

Important Safety Reminders

The LKAS is for your convenience only. It is not an
autonomous driving system and always requires
driver attention and control. The system does not
work if you take your hands off the steering wheel or
fail to steer the vehicle.

Multi-Information Display Warning and
Information Messages

P. 96

The LKAS is convenient when it is used on freeways.

Do not place objects on the instrument panel.
Objects may reflect on the windshield and prevent
correct detection of the traffic lanes.

The LKAS only alerts you when lane drift is detected
without a turn signal in use. The LKAS may not detect
all lane markings or lane departures; accuracy will
vary based on weather, speed, and lane marker
condition. It is always your responsibility to safely
operate the vehicle and avoid collisions.

The LKAS may not work properly or may work
improperly under the certain conditions:

LKAS Conditions and Limitations

P. 457

The LKAS may not function as designed while driving
in frequent stop and go traffic, or on roads with
sharp curves.

You can read about handling information for the
camera equipped with this system.

Front Sensor Camera

P. 465

When you operate the turn signals to change lanes, the system is suspended, and
resumes after the signals are off.
If you make a lane change without operating the turn signals, the LKAS alerts
activate, and torque is applied to the steering.

■

Front sensor camera

Monitors the lane
lines

■

Tactile and visual alerts

Rapid vibrations on the steering wheel
and a warning display alert you that the
vehicle is drifting out of a detected
lane.

■

Steering input assist

The system applies torque to the steering to keep the vehicle between the left and
right lane lines. The applied torque becomes stronger as the vehicle gets closer to
either of the lane lines.

Honda Sensing

Lane Keeping Assist System (LKAS)

452

Driving

Provides assistance to keep the vehicle in the center of the lane. When the vehicle
nears a white or yellow line, steering force of the electric power steering will become
stronger.

When the vehicle enters the warning area, the LKAS alerts you with slight steering
wheel vibration as well as a warning display.

■

Lane Keep Support Function

Lane Keeping Assist System (LKAS)

When it fails to detect lanes, the system will
temporarily be canceled. When a lane is detected, the
system will recover automatically.

■

Lane Departure Warning Function

Warning Area

Continued

453

Honda Sensing

Lane Keeping Assist System (LKAS)

Driving

The system can be used when the following conditions are met.

•

The lane in which you are driving has detectable lane markers on both sides, and
your vehicle is in the center of the lane.

•

The vehicle is traveling between about 45 and 90 mph (72 and 145 km/h).

•

You are driving on a straight or slightly curved road.

•

The turn signals are off.

•

The brake pedal is not depressed.

•

The wipers are not in continuous operation.

■

How to activate the system

Press the

MAIN

button.

The LKAS is on in the instrument panel.
The system is ready to use.

Press the LKAS button.

Lane outlines appear on the multi-
information display.
The system is activated.

■

When the System can be Used

Lane Keeping Assist System (LKAS)

If the vehicle drifts toward either left or right lane line
due to the system applying torque, turn off the LKAS
and have your vehicle checked by a dealer.

MAIN

Button

LKAS Button

Honda Sensing

Lane Keeping Assist System (LKAS)

454

Driving

Keep your vehicle near the center of the
lane while driving.

The lane outlines change to solid ones
once the system starts operating after
detecting the left and right lane
markings.

Press the

MAIN

or LKAS button.

The LKAS is turned off every time you stop the
engine, even if you turned it on the last time
you drove the vehicle.

■

To Cancel

To Cancel

Pressing the

MAIN

button also turns ACC on and off.

MAIN

Button

LKAS Button

Continued

455

Honda Sensing

Lane Keeping Assist System (LKAS)

Driving

■

The system operation is suspended if
you:

•

Set the wipers to

Turning the wipers off or setting it to

MIST

resumes the LKAS.

•

Decrease the vehicle speed to about 40
mph (64 km/h) or less.

Increasing the vehicle speed to about 45
mph (72 km/h) or more resumes the
LKAS.

•

Depress the brake pedal.

The LKAS resumes and starts detecting
the lane lines again once you release the
brake pedal.

•

Your vehicle is driving to the right or the left
of the lane.

•

Set the wiper switch to

AUTO

and the

wipers operate continuously.

The LKAS resumes when the wipers stop
or operate intermittently.

The system operation is suspended if you:

You can change the setting for the LKAS.
LKAS suspended beep on and off can be selected.

Customized Features

P. 298

When the LKAS is suspended,
the lane lines on the multi-
information display change to
lane outlines, and the beeper
sounds (if activated).

Models with automatic intermittent wipers

456

Honda Sensing

Lane Keeping Assist System (LKAS)

Driving

■

The LKAS may be automatically suspended when:

•

The system fails to detect lane lines.

•

The steering wheel is quickly turned.

•

You fail to steer the vehicle.

•

Driving through a sharp curve.

•

Driving at a speed in excess of approximately 90 mph (145 km/h).

Once these conditions no longer exist, the LKAS automatically resumes.

■

The LKAS may be automatically canceled when:

•

The camera temperature gets extremely high or low.

•

The camera behind the rearview mirror, or the area around the camera, including
the windshield, gets dirty.

•

The ABS or VSA

system engages.

The beeper sounds if the LKAS is automatically canceled.

457

Honda Sensing

Lane Keeping Assist System (LKAS)

Continued

Driving

The system may not detect lane markings and therefore may not keep the vehicle in
the middle of the lane under certain conditions, including the following:

■

Environmental conditions

•

Driving in bad weather (rain, fog, snow, etc.).

•

Sudden changes between light and dark, such as an entrance or exit of a tunnel.

•

There is little contrast between lane lines and the roadway surface.

•

Driving into low sunlight (e.g., at dawn or dusk).

•

Strong light is reflected onto the roadway.

•

Driving in the shadows of trees, buildings, etc.

•

Shadows of adjacent objects are parallel to lane markings.

•

Roadway objects or structures are misinterpreted as lane markers.

•

Reflections on the interior of the windshield.

•

Driving at night or in a dark condition such as a tunnel.

■

LKAS Conditions and Limitations

458

Honda Sensing

Lane Keeping Assist System (LKAS)

Driving

■

Roadway conditions

•

Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,
reflected lights, road spray, high contrast).

•

Driving on a road with temporary lane markings.

•

Faint, multiple, or varied lane markings are visible on the roadway due to road
repairs or old lane markings.

•

The roadway has merging, split, or crossing lines (e.g., such as at an intersection
or crosswalk).

•

The lane markings are extremely narrow, wide, or changing.

•

The vehicle in front of you is driving near the lane lines.

•

The road is hilly or the vehicle is approaching the crest of a hill.

•

Driving on rough or unpaved roads, or over bumpy surfaces.

Faded lines

Duplicate lines

Tire tracks

Very wide or narrow traffic lane

459

Honda Sensing

Lane Keeping Assist System (LKAS)

Driving

•

When objects on the road (curb, guard rail, pylons, etc.) are recognized as white
lines (or yellow lines).

•

Driving on roads with double lines.

■

Vehicle conditions

•

Headlight lenses are dirty or the headlights are not properly adjusted.

•

The outside of the windshield is streaked or blocked by dirt, mud, leaves, wet
snow, etc.

•

The inside of the windshield is fogged.

•

The camera temperature gets too high.

•

An abnormal tire or wheel condition (incorrect sizes, varied sizes or construction,
improperly inflated, compact spare tire, etc.).

•

The vehicle is tilted due to a heavy load or suspension modifications.

•

The vehicle is towing a trailer.

Lane void of lines at exit or
interchange

460

Honda Sensing

Road Departure Mitigation System

Driving

Road Departure Mitigation System

Alerts and helps to assist you when the system detects a possibility of your vehicle
unintentionally crossing over detected lane markings and/or leaving the roadway
altogether.

The front camera behind the rearview mirror
monitors left and right lane markings (in white or
yellow). If your vehicle is getting too close to
detected lane markings without a turn signal
activated, the system, in addition to a visual
alert, applies steering torque and alerts you with
rapid vibrations on the steering wheel, to help
you remain within the detected lane.

Customized Features

P. 298

As a visual alert, the

Lane Departure

message

appears on the multi-information display.

If the system determines that its steering input
is insufficient to keep your vehicle on the
roadway, it may apply braking.

Braking is applied only when the lane
markings are solid continuous lines.

The system cancels assisting operations when you turn the steering wheel to avoid
crossing over detected lane markings.

If the system operates several times without detecting driver response, the system
beeps to alert you.

■

How the System Works

Road Departure Mitigation System

Important Safety Reminder

Like all assistance systems, the Road Departure
Mitigation system has limitations.
Over-reliance on the Road Departure Mitigation
system may result in a collision. It is always your
responsibility to keep the vehicle within your driving
lane.

The Road Departure Mitigation system only alerts you
when lane drift is detected without a turn signal in
use. The Road Departure Mitigation system may not
detect all lane markings or lane or roadway
departures; accuracy will vary based on weather,
speed and lane marker condition. It is always your
responsibility to safely operate the vehicle and avoid
collisions.

You can read about handling information for the
camera equipped with this system.

Front Sensor Camera

P. 465

The Road Departure Mitigation system may not work
properly or may work improperly under the certain
conditions:

Road Departure Mitigation system
Conditions and Limitations

P. 463

There are times when you may not notice Road
Departure Mitigation system functions due to your
operation of the vehicle, or road surface conditions.