Honda CR-V (2022 year). Manual in english - page 6

 

  Index      Manuals     Honda CR-V (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     4      5      6      7     ..

 

 

 

Honda CR-V (2022 year). Manual in english - page 6

 

 

uu

Child Safety

u

Safety of Larger Children

92

Safe Driving

If a lap/shoulder seat belt cannot be used 
properly, position the child in a booster seat in 
the rear seat. For the child’s safety, check that 
the child meets the booster seat 
manufacturer’s recommendations.

A backrest is available for a specific booster 
seat. Install the backrest to the booster seat 
and adjust it to the vehicle seat according to 
the booster seat manufacturer’s instructions. 
Make sure the seat belt is properly routed 
through the guide at the shoulder of the 
backrest and the belt does not touch and 
cross the child’s neck.

Booster Seats

1

Booster Seats

When installing a booster seat, make sure to read the 
instructions that came with it, and install the seat 
accordingly.
There are high- and low-type booster seats. Choose a 
booster seat that allows the child to wear the seat 
belt correctly.

We recommend a booster seat with a backrest as it is 
easier to adjust the shoulder belt.

Guide

93

uu

Child Safety

u

Safety of Larger Children

Safe Driving

Your vehicle has a rear seat where children can be properly restrained. If you ever 
have to carry a group of children, and a child must ride in front:

Make sure you read and fully understand the instructions and safety information 
in this manual.

Move the front passenger seat as far back as possible.

Have the child sit upright and well back in the seat.

Check that the seat belt is properly positioned so that the child is secure in the 
seat.

Monitoring child passengers

We strongly recommend that you keep an eye on child passengers. Even older, more 
mature children sometimes need to be reminded to fasten their seat belts and sit up 
properly.

Protecting Larger Children - Final Checks

94

Safe Driving

Exhaust Gas Hazard

Carbon Monoxide Gas

The engine exhaust from this vehicle contains carbon monoxide, a colourless, 
odourless, and highly toxic gas. As long as you properly maintain your vehicle, 
carbon monoxide gas will not get into the interior.

Have the exhaust system inspected for leaks whenever

The exhaust system is making an unusual noise.

The exhaust system may have been damaged.

The vehicle is raised for an oil change.

When you operate a vehicle with the tailgate open, airflow can pull exhaust gas into 
the interior and create a hazardous condition. If you must drive with the tailgate 
open, open all the windows and set the climate control system as shown below.

1.

Select the fresh air mode.

2.

Select the 

 mode.

3.

Set the fan speed to high.

4.

Set the temperature control to a comfortable setting.

Adjust the climate control system in the same manner if you sit in your parked 
vehicle with the engine running.

1

Carbon Monoxide Gas

An enclosed area such as a garage can quickly fill up 
with carbon monoxide gas.
Do not run the engine with the garage door closed. 
Even when the garage door is open, drive out of the 
garage immediately after starting the engine.

3

WARNING

Carbon monoxide gas is toxic.

Breathing it can cause unconsciousness and 
even kill you.

Avoid any enclosed areas or activities that 
expose you to carbon monoxide.

95

Safe Driving

Safety Labels

Label Locations

These labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels 
carefully.

If a label comes off or becomes hard to read, contact a dealer for a replacement.

Reserve Tank Cap

Reserve Tank Cap Danger Label

2

 P. 687

Sun Visor

Child Safety/SRS Airbag 
(Left-hand drive type)

2

 P. 71

Battery Danger Label

2

 P. 715

Passenger Front Airbag Off 
System Label 
(Left-hand drive type)

2

 P. 62

Sun Visor

Child Safety/SRS Airbag 
(Right-hand drive type)

2

 P. 71

Air Conditioner Label

2

 P. 718

Passenger Front Airbag Off 
System Label 
(Right-hand Drive Type)

2

 P. 62

Front Bulkhead Cover

Front Bulkhead Cover Label

2

 P. 680

Rear Head Restraint Label

2

 P. 261, 262

Wireless Charger

*

2

 P. 286

* Not available on all models

98

In

strum

e

nt Pa

nel

Indicators

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Parking Brake 
and Brake 
System Indicator 
(Red)

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off if the parking 

brake has been released.

Comes on when the parking brake is 
applied and goes off when it is 
released.

Comes on when the brake fluid level 
is low.

Comes on if there is a problem with 
the brake system.

The beeper sounds and the indicator 
comes on if you drive with the 
parking brake not fully released.

Comes on while driving 

- Make sure 

the parking brake is released. Check the 
brake fluid level.

2

What to do when the indicator 
comes on while driving

 P. 751

Comes on along with the parking 
brake and brake system indicator 
(amber) 

- Immediately stop in a safe 

place. Contact a dealer for repair. The 
brake pedal becomes harder to operate. 
Depress the pedal further than you 
normally do.

Comes on along with the ABS 
indicator 

- Have your vehicle checked 

by a dealer.

2

If the Brake System Indicator (Red) 
Comes On or Blinks

 P. 751

(Red)

99

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Parking Brake 
and Brake 
System Indicator 
(Red)

Comes on for about 15 seconds 
when you pull the electric parking 
brake switch while the ignition 
switch is in LOCK 

(

0

*1

.

Stays on for about 15 seconds when 
you turn the ignition switch to LOCK 

(

0

*1

 while the electric parking brake 

is set.

Blinks and the parking brake and 
brake system indicator (amber) 
comes on at the same time 

- There is 

a problem with the electric parking 
brake system. The parking brake may 
not be set.
Avoid using the parking brake and have 
your vehicle checked by a dealer 
immediately.

2

If the Brake System Indicator (Red) 
Comes On or Blinks at the Same 
Time When the Brake System 
Indicator (Amber) Comes On

 P. 752

Automatic Brake 
Hold System 
Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Comes on when the automatic 
brake hold system is on.

2

Automatic Brake Hold

 P. 631

Automatic Brake 
Hold Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Comes on when the automatic brake 
hold is activated.

2

Automatic Brake Hold

 P. 631

(Red)

100

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Parking Brake 
and Brake 
System Indicator 
(Amber)

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Comes on if there is a problem with 
a system related to braking other 
than the conventional brake system.

Comes on if there is a problem with 
the electric parking brake system or 
the automatic brake hold system.

Stays on constantly 

- Have your 

vehicle checked by a dealer.

Comes on while driving 

- Avoid using 

the parking brake and have your vehicle 
checked by a dealer immediately.

Comes on if the parking brake and 
brake system is deactivated 
temporarily after the battery has 
been disconnected, then 
reconnected.

Drive a short distance at more than 20 
km/h (12 mph). The indicator should go 
off. If it does not, have your vehicle 
checked by a dealer.

Comes on if there is a problem with 
the radar sensor.

Indicator may come on temporarily 
when the Maximum Load Limit is 
exceeded.

Make sure the total load is within the 
Maximum Load Limit.

2

Load Limit

 P. 499

Stays on constantly 

- Have your 

vehicle checked by a dealer.

(Amber)

101

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Low Oil Pressure 
Indicator

Comes on when you turn the 
ignition switch to ON 

(

w

*1

, and goes 

off when the engine starts.

Comes on when the engine oil 
pressure is low.

Comes on while driving 

- Immediately 

stop in a safe place.

2

If the Low Oil Pressure Indicator 
Comes On

 P. 749

Malfunction 
Indicator Lamp

Comes on when you turn the 
ignition switch to ON 

(

w

*1

, and goes 

off either when the engine starts, or 
after several seconds if the engine 
did not start.

Comes on if there is a problem with 
the emissions control systems.

Blinks when a misfire in the engine’s 
cylinders is detected.

Comes on while driving 

- Have your 

vehicle checked by a dealer.

Blinks while driving 

- Stop in a safe 

place where there are no flammable 
objects. Stop the engine for 10 minutes 
or more, and wait for it to cool down. 
Then, take your vehicle to a dealer.

2

If the Malfunction Indicator Lamp 
Comes On or Blinks

 P. 750

Charging 
System Indicator

Comes on when you turn the 
ignition switch to ON 

(

w

*1

, and goes 

off when the engine starts.

Comes on when the battery is not 
charging.

Comes on while driving 

- Turn off the 

climate control system and rear demister 
in order to reduce electricity 
consumption.

2

If the Charging System Indicator 
Comes On

 P. 749

102

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Shift Position 
Indicator

*

Indicates the current shift position.

2

Shifting

 P. 519

Transmission 
System 
Indicator

*

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Blinks if the transmission system has 
a problem.

Blinks while driving 

- Avoid sudden 

starts and acceleration and have your 
vehicle checked by a dealer immediately.

Shift Up 
Indicator

Comes on when shifting up is 
recommended.

2

Shift Up Indicator

 P. 523

2

Shift Up/Down Indicators

 P. 525

Shift Down 
Indicator

*

Comes on when shifting down is 
recommended.

2

Shift Up/Down Indicators

 P. 525

M

 (7-speed 

manual shift 
mode) Indicator/
Shift Indicator

*

Comes on when 7-speed manual 
shift mode is applied.

2

7-Speed Manual Shift Mode

 P. 521

* Not available on all models

103

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Seat Belt 
Reminder 
Indicator

Comes on if you are not wearing a 
seat belt when you turn the ignition 
switch to ON 

(

w

*1

.

If the front passenger is not wearing 
a seat belt, the indicator comes on a 
few seconds later.

Blinks while driving if either you or 
the front passenger has not fastened 
a seat belt. The beeper sounds and 
the indicator blinks at regular 
intervals.

The beeper stops and the indicator goes 
off when you and the front passenger 
fasten their seat belts.

Stays on after you or the front 
passenger has fastened the seat belt 

- A detection error may have occurred in 
the sensor. Have your vehicle checked by 
a dealer.

2

Seat Belt Reminder

 P. 45

Low Fuel 
Indicator

Comes on when the fuel reserve is 
running low (approximately 8.0 
litres/1.76 Imp gal left).

Blinks if there is a problem with the 
fuel gauge.

Comes on 

- Refuel your vehicle as soon 

as possible.

Blinks 

- Have your vehicle checked by a 

dealer.

Anti-lock Brake 
System (

ABS

Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

If it comes on at any other time, 
there is a problem with the ABS.

Stays on constantly 

- Have your 

vehicle checked by a dealer. With this 
indicator on, your vehicle still has normal 
braking ability but no anti-lock function.

2

Anti-lock Brake System (ABS)

 P. 634

(Red)

104

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Supplemental 
Restraint System 
Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Comes on if a problem with any of 
the following is detected:

-

Supplemental restraint system

-

Side airbag system

-

Side curtain airbag system

-

Seat belt tensioner

Stays on constantly or does not 
come on at all 

- Have your vehicle 

checked by a dealer.

Passenger Front 
Airbag On/Off 
Indicators

Both indicators come on for a few 
seconds when you turn the ignition 
switch to ON 

(

w

*1

, then goes off 

after a system check up.
When the passenger front airbag is 
active: The on indicator comes back 
on and remains on for about 60 
seconds.
When the passenger front airbag is 
inactive: The off indicator comes 
back on and stays on. This is a 
reminder that the passenger front 
airbag is deactivated.

2

Passenger Front Airbag Off System

 

P. 61

105

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Vehicle Stability 
Assist (VSA) 
System Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Blinks when VSA, or trailer stability 
assist is active.

Comes on if there is a problem with 
the VSA system, brake assist, hill 
start assist system, trailer stability 
assist or brake lighting system.

Stays on constantly 

- Have your 

vehicle checked by a dealer.

2

Vehicle Stability Assist (VSA) 
System

 P. 543

2

Hill start assist system

 P. 512

2

Trailer Stability Assist

 P. 504

When 

TSA

 is displayed on the driver 

information interface, the VSA does not 
activate.

Comes on if the VSA system is 
deactivated temporarily after the 
battery has been disconnected, then 
re-connected.

Drive a short distance at more than 20 
km/h (12 mph). The indicator should go 
off. If it does not, have your vehicle 
checked by a dealer.

106

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Vehicle Stability 
Assist (VSA) 

OFF

 

Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Comes on when you partially disable 
VSA.

2

VSA On and Off

 P. 544

Comes on if the VSA system is 
deactivated temporarily after the 
battery has been disconnected, then 
re-connected.

Drive a short distance at more than 20 
km/h (12 mph). The indicator should go 
off. If it does not, have your vehicle 
checked by a dealer.

Electric Power 
Steering (EPS) 
System Indicator

Comes on when you turn the 
ignition switch to ON 

(

w

*1

, and goes 

off when the engine starts.

Comes on if there is a problem with 
the EPS System.

Stays on constantly or does not 
come on at all 

- Have your vehicle 

checked by a dealer.

2

If the Electric Power Steering (EPS) 
System Indicator Comes On

 P. 753

107

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

Low Tyre 
Pressure/
Deflation 
Warning System 
Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

May come on briefly if the ignition 
switch is turned to ON 

(

w

*1

 and the 

vehicle is not moved within 45 
seconds, to indicate the initialisation 
process is not yet complete.

Comes on and stays on when:

-

One or more tyres’ pressures are 
determined to be significantly low.

-

The system has not been initialised.

Comes on while driving 

- Stop in a 

safe place, check tyre pressures, and 
inflate the tyre(s) if necessary.

Stays on after the tyres are inflated 
to the recommended pressures 

- The 

system needs to be initialised.

2

Deflation Warning System 
Initialisation

 P. 548

Blinks for about one minute, and 
then stays on if there is a problem 
with the deflation warning system, 
or when a compact spare tyre is 
temporarily installed.

Blinks and remains on 

- Have your 

vehicle checked by a dealer. If the vehicle 
is fitted with a compact spare, get your 
regular tyre repaired or replaced and put 
back on your vehicle as soon as you can.

Comes on if the deflation warning 
system is deactivated temporarily 
after the battery has been 
disconnected, then re-connected.

Drive a short distance at more than 20 
km/h (12 mph). The indicator should go 
off. If it does not, have your vehicle 
checked by a dealer.

108

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models with the keyless access system have an 

ENGINE START/STOP

 button instead of an ignition switch.

Indicator

Name

On/Blinking

Explanation

Message

System Message 
Indicator

Comes on for a few seconds when 
you turn the ignition switch to ON 

(

w

*1

, then goes off.

Comes on along with a beep when a 
problem is detected. A system 
message on the driver information 
interface appears at the same time.

While the indicator is on, press the 

 

(display/information) button to see the 
message again.

Refer to the Indicators information in 
this chapter when a system message 
appears on the driver information 
interface. Take the appropriate action 
for the message.

The driver information interface does 
not return to the normal screen unless 
the warning is cancelled, or the 

 

button is pressed.

Auto High-Beam 
Indicator

Comes on when all the operating 
conditions of the auto high-beam 
are met.

2

Auto High-Beam

 P. 227

 

 

 

 

 

 

 

Content      ..     4      5      6      7     ..