Honda Insight (2019 year). Instruction - part 8

111

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the power system temperature is low. • Your vehicle has less ability to accelerate and may be 

harder to start on an incline.

• Disappears once you start driving as the High Voltage 

battery warms up.

• Appears when the power system temperature is 

high.

• Your vehicle has less ability to accelerate and may be 

harder to start on an incline.

• Park in a safe place, and cool the system down.

2 Overheating P. 631

• Appears if the power system is in diagnostic mode.

• You may notice a decrease in available power. Have 

your vehicle checked by a dealer.

• Appears if there is a problem with the acoustic 

vehicle alerting system.

• Have your vehicle checked by a dealer immediately.

112

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when you press the fuel fill door release 

button.

• The display changes to Ready when the fuel vapor 

pressure inside the fuel tank is released. You can start 
refueling once Ready appears.

2 Refueling P. 546

• Appears when the vehicle is ready to be refueled.

• Appears when the high voltage battery and other 

system control temperatures are too low to operate 
(approx. –40°F [–40°C] or below).

• You must wait for an increase in the ambient 

temperature or move the vehicle to a warmer location.

• Consult a dealer if necessary.

• Appears when the high voltage battery temperature 

is too low to operate (approx. −22°F [−30°C] or 
below).

• You can start the power system and use the climate 

control system to warm up the interior, which will also 
warm the High Voltage battery enough for you to drive 
the vehicle.

113

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when the high voltage battery is running 

extremely low.

• Contact a dealer immediately.

114

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when you failed to select EV mode or EV 

mode is automatically canceled.

• The cause may be shown with the following 

message:

- Battery Temperature At Limit.
- Battery Charge Too Low.
- Engine Too Cold.
- Cabin Being Heated.
- Speed Too High.
- Hard Acceleration Requested.

• EV mode is available once the condition is improved or 

the cause that canceled EV mode is cleared.

• Appears when EV mode has been automatically 

canceled.

2 EV Button P. 12

• Appears if the engine needs to be started when you 

press the EV button.

—

115

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when you try to change the shift position 

without releasing your foot off the accelerator pedal.

• Release your foot off the accelerator pedal, then select 

a shift button.

• Appears when the 

(

P button is pressed while the 

vehicle is moving.

• Appears if you put the transmission into 

(

R while 

the vehicle is moving forward, or into 

(

D while the 

vehicle is reversing.

• Make sure that the vehicle comes to a stop before 

operating the select button.

• Appears when you set the power mode to ON 

without fastening the driver’s seat belt.

• Appears when you change the shift position after 

(

P has been automatically selected with the driver’s 

door open, the driver’s seat belt unfastened, then 
the brake pedal is released.

• Fasten the seat belt properly before you start to drive.

2 Shift Operation P. 459

• Appears when you try to change the shift position 

without depressing the brake pedal.

• Depress the brake pedal, then select a shift button.

116

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears when you set the power mode to OFF while 

driving.

• Immediately stop in a safe place, set the parking brake, 

then restart the power system. If the message 
disappears, continue driving.

• Appears if the vehicle is stopped and the driver’s seat 

belt is unfastened, as there is a possibility that the 
vehicle may roll.

• When the power system is ON or when you are parking 

or exiting the vehicle, put the transmission into 

(

P 

before releasing the brake pedal.

2 Shift Operation P. 459

• Appears if you depress the accelerator pedal when 

the transmission is in 

(

N.

• Release the accelerator pedal. After that, depress the 

brake pedal and change the transmission position.

●

Appears if the shift position is repeatedly changed 
between 

(

P and another position.

●

Wait awhile, then change the shift position.

●

Appears if the 12V battery is not charged enough to 
make it possible to change shift positions.

●

Keep the power system on and wait awhile.

●

The battery may be nearing the end of its life.
Have it checked by a dealer.

117

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears for a few seconds if you have not pressed 

the 

(

N button long enough to initiate Neutral-Hold 

mode.

2 If you want to keep the transmission in 

(

N

 

position [car wash mode] P. 461

• Appears when you press and hold 

(

N button for 

more than two seconds.

• Disappears when you set the shift position to a gear 

other than 

(

N.

2 If you want to keep the transmission in 

(

N

 

position [car wash mode] P. 461

118

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

• Appears if there is a problem with the auto high-

beam.

• Manually operate the headlight switch.
• If you are driving with the high-beam headlights when 

this happens, the headlights are changed to low beams.

●

Appears when ACC with LSF has been automatically 
canceled.

●

You can resume the set speed after the condition that 
caused ACC with LSF to cancel improves. Press the 
RES/+ button.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Flashes when the system senses a likely collision with 
a vehicle in front of you.

●

Take the appropriate means to prevent a collision (apply 
the brakes, change lanes, etc.)

2 Collision Mitigation Braking System

TM

 (CMBS

TM

) 

P. 483

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

119

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when ACC with LSF is canceled due to 
excessive high vehicle speed.

●

Reduce the speed, then reset ACC with LSF.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when the speed of the vehicle is too high for 
you to set ACC with LSF.

●

Reduce the speed, then set ACC with LSF.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears if ACC with LSF is canceled while your 
vehicle is automatically stopped by ACC with LSF.

●

Immediately depress the brake pedal.

●

Appears when pressing the RES/+ or SET/− button 
while the vehicle is moving and the brake pedal is 
depressed.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

120

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the distance between your vehicle 
and the vehicle ahead of you is too close while ACC 
with LSF is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when pressing the RES/+ or SET/− button 
while the distance between your vehicle and the 
vehicle ahead of you is too close.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when the parking brake is applied 
automatically while ACC with LSF is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

2 Parking Brake P. 531

●

Appears when pressing the RES/+ or SET/− button 
while the parking brake is applied.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

2 Parking Brake P. 531

121

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears if the VSA® or traction control function 
operates while ACC with LSF is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears just before the ACC with LSF is 
automatically canceled when you are descending a 
long hill etc (The following interval is automatically 
set to extra long).

●

Appears when the ACC with LSF has been 
automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when you are descending a long hill etc and 
you press the RES/+ or SET/− button.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

122

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the driver’s seat belt is unfastened 
while your vehicle is automatically stopped by ACC 
with LSF.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when pressing the RES/+ or SET/− button 
while the driver’s seat belt is unfastened.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when the transmission is put into any 
position other than 

(

D while ACC with LSF is in 

operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when pressing the RES/+ or SET/− button 
while the transmission is in any position other than 

(

D.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

123

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the vehicle is stopped on a very steep 
slope while ACC with LSF is in operation.

●

ACC with LSF has been automatically canceled.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

●

Appears when pressing the RES/+ or SET/− button 
while the vehicle is stopped on a very steep slope.

●

ACC with LSF cannot be set.

2 Adaptive Cruise Control (ACC) with Low Speed 

Follow (LSF) P. 492

124

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears if anything covers the radar sensor cover 
and prevents the sensor from detecting a vehicle in 
front.

●

May appear when driving in bad weather (rain, 
snow, fog, etc.)

●

When the radar sensor gets dirty, stop your vehicle in a 
safe place, and wipe off dirt using a soft cloth.

●

Have your vehicle checked by a dealer if the message 
does not disappear even after you clean the sensor 
cover.

2 Radar Sensor P. 530

●

Appears if the temperature inside the front sensor 
camera is too high and the ACC with LSF, LKAS, 
traffic sign recognition system and auto high-beam 
cannot be activated.

●

Use the climate control system to cool down the 
camera.

●

Disappears - The camera has been cooled down and 
the systems are activated normally.

2 Front Sensor Camera P. 528

●

Appears if the area around the front sensor camera is 
blocked by dirt, mud, etc and be prevented from 
detecting a vehicle in front.

●

May appear when driving in bad weather (rain, 
snow, fog, etc.)

●

When the front window gets dirty, stop your vehicle in 
a safe place, and wipe it off with a soft cloth.

●

Have your vehicle checked by a dealer if the message 
does not disappear even after you cleaned the area 
around the camera.

2 Front Sensor Camera P. 528

125

uu

Indicators

u

Driver Information Interface Warning and Information Messages

Continued

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Appears when the vehicle is driving out of a detected 
lane. The steering wheel vibrates rapidly.

●

Keep the vehicle within the lane you are driving.

2 Lane Keeping Assist System (LKAS) P. 509

●

Appears when the vehicle is driving out of a detected 
lane.

- The steering wheel vibrates rapidly when the 

vehicle is drifting out of a detected lane.

- The steering wheel vibrates rapidly when the 

vehicle is drifting out of a detected lane. The system 
also steers the vehicle to help you remain within 
your driving lane.

●

Keep the vehicle within the lane you are driving.

2 Road Departure Mitigation (RDM) System P. 517

●

You can change the setting for the road departure 
mitigation system. Narrow, Normal, Wide, and 
Warning Only can be selected.

2 Customized Features P. 366

●

Appears when the vehicle is likely to drive out of a 
detected lane.
The RDM system also steers the vehicle to help you 
remain within your driving lane.

—

Lane Keeping Assist System (LKAS)

Road Departure Mitigation (RDM) System

When you selected Warning Only

When you selected Narrow, Normal or Wide

Road Departure Mitigation (RDM) System
When you selected Narrow

126

uu

Indicators

u

Driver Information Interface Warning and Information Messages

In

strum

e

nt Pa

nel

Message

Condition

Explanation

●

Blinks when you fail to steer the vehicle. The beeper 
sounds simultaneously.

●

Operate the steering wheel to resume the LKAS.

●

Appears when the LKAS is in operation, or the LKAS 
button is pressed, but there is a problem with a 
system related to the LKAS. The LKAS cancels 
automatically. The beeper sounds simultaneously.

●

If any other system indicators come on, such as the 
VSA®, ABS and brake system, take appropriate action.

2 Indicators P. 80

●

Appears if the ECON mode or SPORT mode cannot 
be changed due to certain situations, such as a 
system error or adverse driving conditions.

2 ECON Mode P. 467
2 SPORT Mode P. 463