12.4.3 Removal and Installation
12.4.3.1 Front Bumper Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices"

FE12-0145b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove  the  radiator  grille  panel  from  the  front  end
module.

FE12-0146b

3.

Remove the front bumper retaining screws from the sides
and the bottom.

4.

Remove the front bumper.

5.

Disconnect the front fog lamp harness connectors.

6.

prior to remove
Remove the front fog lamps. Refer to 

11.4.8.7

 

Front Fog

Lamp Replacement

.

7.

Remove the front fog lamp covers before removal.

Body, Sheet Metal and Painting

Bumpers

12-29

FE12-0147b

8.

Remove the six radiator grille panel to the front bumper
retaining screws and remove the radiator grille panel.

Note

Hatchback radiator grille has two retaining screws.

FE12-0148b

9.

Remove the front bumper fascia reinforcements from both
sides.

Installation Procedure:

FE12-0149b

1.

Install the front bumper fascia reinforcements.

Torque :9-13 Nm (Metric) 6.7-9.6 lb-ft (US English)

2.

Install the front fog lamp covers.

3.

Install the radiator grille panel to the front bumper.

4.

Install the front fog lamps.

5.

Connect the front fog lamp harness connectors.

6.

Install the front bumper.

7.

Install the front bumper side and bottom retaining screws.

8.

Install the radiator grille panel to the front end module.

Note

The replacement procedure for Hatchback is similar
to that of sedan.

12-30

Bumpers

Body, Sheet Metal and Painting

12.4.3.2 

Rear 

Bumper 

Replacement

(Hatchback)

Removal Procedure:

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

FE12-0151c

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove the two rear bumper upper retaining screws, six
rear bumper to rear wheelhouse liner retaining bolts and
four  rear  bumper  to  spare  wheel  carrier  retaining  bolts.
Pull the rear bumper from sides to loosen the rear bumper.

FE12-0152c

3.

Disconnect  four  rear  park  assist  sensor  harness
connectors and remove the rear bumper.

4.

Remove  four  rear  park  assist  sensors.  Refer  to

11.14.7.2

 

Reverse Radar Sensor Replacement

.

Body, Sheet Metal and Painting

Bumpers

12-31

FE12-0153c

5.

Remove the rear bumper brackets.

Installation Procedure:

FE12-0154c

1.

Install the rear bumper brackets..

Torque: 11 Nm (Metric) 8.1 lb-ft (US English)

2.

Install four rear park assist sensors.

3.

Connect four rear park assist sensor harness connectors.

FE12-0155c

4.

Install  the  two  rear  bumper  upper  retaining  screws,  six
rear bumper to rear wheelhouse liner retaining bolts and
four rear bumper to spare wheel carrier retaining bolts.

5.

Connect the battery negative cable.

12-32

Bumpers

Body, Sheet Metal and Painting