Installation Procedure:

FE11-1527b

1.

Insert the sunroof visor.

FE11-1528b

2.

Install the sunroof visor limit tangs.

3.

Install the sunroof frame.

Body Electric

Sunroof

11-325

11.9 Central Locking

11.9.1 Specifications
11.9.1.1 Fasteners Tightening Specifications

Applications

Model

Specifications

Metric (Nm)

US English (lb-ft)

Left Front Door Lock Retaining
Bolts

M6 × 10

4-5

3-4

Left Rear Door Lock Retaining
Bolts

M6 × 10

4-5

3-4

Left Front Door Lock Seat
Retaining Bolts

M6 × 16

20-26

14.8-19.2

Left Rear Door Lock Seat
Retaining Bolts

M6 × 16

20-26

14.8-19.2

Rear Compartment Lock Seat
Retaining Bolts

M6 × 12

13-17

9.6-12.6

Rear Compartment Lid Lock
Assembly Bolts

M6 × 12

13-17

9.6-12.6

11-326

Central Locking

Body Electric

11.9.2 Description and Operation
11.9.2.1 Description and Operation

Electric door locks use a solenoid valve within each door lock.
Door locks can only be controlled by combination switch on the
left  front  inside  door  handle  the  driver  door  switch  (remote
control key operation). When using the actuator or cylinder lock
to unlock the driver door, all door locks will be unlocked.

Lock and Unlock

–

Turn the key on the driver door lock to unlocking position,
all four locks are unlocked.

–

Turn the key on the driver door lock to locking position, all
four locks are locked.

–

Inside  unlocking  /  lock  switch  (driver  door):  unlock  four
doors; lock four doors.

–

The  rear  compartment  lid  can  be  opened  by  the  remote
control  or  the  unlock  switch  (sedan);  Hatchback  can  be
unlocked  by  the  remote  control  or  unlock  switch
(hatchback). At speeds up to 5kph the rear compartment /
hatchback unlocking function is prohibited.

Auto Locking

–

Turn  the  ignition  switch  to  the  "ON"  position.  When  the
speed is above 20 km/h, all four doors will automatically
lock. If the speed is more than 20 km/h again, auto-lock will
not react. Only when the ignition switch is turned off or then
any  door  is  unlocked  and  locked,  the  automatic  locking
feature will be activated.

–

After pressing the remote unlock button 15 s, if none of all
four doors, engine hood, rear compartment lid is opened,
all  doors  will  automatically  lock.  If  the  unlock  button  is
pressed inside the 15 s, it will start 15 s timer again.

Key In Lock Reminder

If the key is inserted in the ignition "OFF"(ACC position will not
be detected) position, the door can not be locked; if the driver
door is open, BCM will send a CAN periodic alarm signal to the
instrument to warn that the key is not removed.

Auto Unlocking

–

When the doors are locked, after pulling out the ignition key,
all  four  doors  automatically  unlock.  When  door  are  not
locked, after pulling out the ignition key, all four door locks
will not respond.

–

After receiving the airbag deployed signal from the CAN (3
or  more  collision  signals  are  received),  four  doors  will
automatically unlock. This function is not guaranteed in the
following circumstances, such as battery voltage low or the
wiring harness damaged by the collision causing the lack
of door locks motor control power supply.

Super Locking (If Equipped)

Achieve super-Lock function in one the following two ways:

–

Press the by remote control "locking" key twice in 300ms.

–

In 3s turn the key in the lock from the "Lock" to "Unlock"
position twice. Flash once to confirm the above two ways.

Note

At this point the door can only be unlocked by the valid
key or remote control.

Super Unlocking (If Equipped)

Dual lock unlocking will change the lock motor from dual locking
to central locking status. Under the dual locking status, there
are ways to unlock the dual locking:

–

Driver door metal key unlock dual locking

Turn the driver door metal keys to the unlocked position,
dual locking status will be disabled, the lock motor will be
in central locking status.

–

Remote Control Dual Locking Unlock

Use the remote control to unlock, the dual locking status
disabled. The lock motor will be in central locking status.
Flash twice to confirm.

Body Electric

Central Locking

11-327

11.9.3 System Working Principle
11.9.3.1 System Working Principle

Door Lock Switch

–

System has two lock switches, one is located in the left front
door  combination  switch  and  the  other  is  in  the  left  front
door key cylinder. Other key cylinders can only be used to
unlock a single door and can not activate the central locking
function.

–

The two lock switch locking signals input to the BCM share
a common input terminal, but the unlocking signal is input
individually.

Locking Operation

When the BCM receives locking input signal or the automatic
locking requirements are met, the BCM locking output terminal
will send power supply to control the door motor to lock four
doors. For hatchback model, the locking command is also sent
to the hatchback lock motor.

Unlocking Operation

When the BCM receives unlocking input signal or the automatic
unlocking  requirements  are  met,  the  BCM  unlocking  output
terminal  will  send  power  supply  to  control  the  door  motor  to
unlock  four  doors.  For  hatchback  model,  the  unlocking
command  is  also  sent  to  the  hatchback  lock  motor.  (rear
compartment (hatchback) unlocks separately).

Super Locking (If Equipped)

On the vehicle with the super locking feature, in addition to door
lock there is also a super locking motor. If BCM receives the
super locking input signal, it will immediately send power from
the super locking output terminal to control the super locking
motor to activate super locking.

Note

Even on the vehicle with the super locking feature, the
rear  compartment  (hatchback)  lock  does  not  have  the
super locking feature.

11-328

Central Locking

Body Electric