11.6.8.5  Rear  Wiper  Nozzle  Replacement
(Hatchback)

Removal Procedure

FE11-0424c

1.

Remove  the  hatchback  trim  panel.  Refer  to

12.9.1.15

 

Hatchback  Inner  Trim  Panel  Replacement

(Hatchback)

.

2.

Remove  the  high  mounted  brake  lamp.  Refer  to
the

11.4.8.10

 

High  Mounted  Brake  Lamp  Replacement

(Hatchback)

.

3.

pull out the nozzle.

Installation Procedure:

FE11-0425c

1.

Connect the spray nozzle and the hose.

Note

Hose can not be squeezed or folded.

FE11-0426c

2.

Run the nozzle through the high mounted brake lamp.

3.

Install the high mounted brake lamp.

4.

Install the hatchback trim panel.

Body Electric

Wipers / Washers System

11-257

11.6.8.6 Washer Motor and Hose Replacement

Wash Motor Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

FE11-0427b

1.

Turn the front wheels to the right end for access.

2.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

3.

Remove  the  right  front  fender.  Refer  to 

12.10.1.8

 

Front

Wheelhouse Liner Replacement

.

FE11-0428b

4.

Disconnect the washer motor wiring harness connector.

5.

Disconnect the washer hose from the washer motor.

6.

Pull out the washer motor.

11-258

Wipers / Washers System

Body Electric

Installation Procedure:

FE11-0429b

1.

Install the washer motor.

2.

Connect the washer hose.

FE11-0430b

3.

Connect the washer motor wiring harness connector.

4.

Install the right front fender.

5.

Connect the battery negative cable.

6.

Turn the front wheels back to straight.

Hose Replacement

Removal Procedure

FE11-0418b

1.

Turn the front wheels to the right end for access.

2.

Remove  the  engine  hood  insulation  pad.  Refer  to

12.10.1.2

 

Hood Sound Insulation Pad Replacement

.

3.

Disconnect  the  washer  hose  and  the  nozzle.  Refer  to

11.6.8.4

 

Wiper Nozzle Replacement

.

Body Electric

Wipers / Washers System

11-259

FE11-0433b

4.

Remove  the  front  fender.  Refer  to 

12.10.1.8

 

Front

Wheelhouse Liner Replacement

.

5.

Disconnect the washer hose from the motor.

FE11-0434b

6.

Remove the washer hose.

Installation Procedure:

FE11-0434b

1.

Install the washer hose to the washer pump.

2.

Run through and install the hose.

3.

Install the front fender.

4.

Connect the washer hose to the nozzle.

11-260

Wipers / Washers System

Body Electric