FE11-0277b

4.

Remove the tail lamp retaining bolts and pull out the tail
lamp.

FE11-0278c

5.

Remove the left tail lamp and remove the bulbs.

Body Electric

Lighting System

11-141

FE11-0279c

6.

Remove the left tail lamp and remove the bulbs.

Installation Procedure:

FE11-0280c

1.

Insert the bulbs into the tail lamp assembly.

Note

Avoid touching the bulb or letting the bulb to come
into contact with any moist. When the lamp is turned
on, the grease or moisture on the bulb may cause
the bulb explode. If the bulb contacts with grease or
moisture,  clean  the  bulb  with  alcohol  or  an
appropriate cleaning agent and dry the bulb.

11-142

Lighting System

Body Electric

FE11-0281b

2.

Install the tail lamp assembly.

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

FE11-0282b

3.

Connect the tail lamp assembly wiring harness connector.

4.

Install the hatchback trim panel.

5.

Connect the battery negative cable.

Body Electric

Lighting System

11-143

FE11-0283c

6.

To replace the tail lamp bulb, open the tail lamp cover.

11.4.8.14 License Plate Lamp Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

FE11-0284b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove  the  rear  compartment  lid  trim  panel.  Refer  to

12.9.1.14

 

Rear  Compartment  Lid  Inner  Trim  Panel

Replacement

.

FE11-0285b

3.

Disconnect  the  License  Plate  Lamp  wiring  harness  to
connect devices.

4.

Remove  the  rear  compartment  lid  applique.  Refer  to

12.10.1.4

 

Rear Compartment Lid Applique Replacement

.

11-144

Lighting System

Body Electric