8.2.8.12  Air-conditioning  Ventilation  Pipe
Replacement

Removal Procedure

FE08-0046b

1.

Remove 

the 

instrument 

panel. 

Refer 

to

12.8.3.1

 

Instrument Panel Replacement

.

2.

Remove the ventilation pipe retaining screws.

Installation Procedure:

1.

Install and tighten the ventilation pipe retaining screws.

Torque: 6 Nm (Metric) 4.5 lb-ft (US English)

2.

Install the instrument panel.

8.2.8.13 Heater Core Replacement

Removal Procedure

FE08-0047b

1.

Remove  the  air-conditioning  assembly.  Refer  to

8.2.8.5

 

Air-conditioning Assembly Replacement

.

2.

Remove the heater core body hard tube clamp.

3.

Remove the heater core body.

Heating, Ventilation and A/C System

Automatic Air-conditioning

8-63

Installation Procedure:

FE08-0048b

1.

Insert the heater core body.

2.

Install and tighten the heater core body hard tube clamp
and tighten the retaining screw.

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

3.

Insert the air-conditioning assembly.

8.2.8.14 Evaporator Core Replacement

Removal Procedure

FE08-0049b  

1.

Remove  the  air-conditioning  assembly.  Refer  to

8.2.8.5

 

Air-conditioning Assembly Replacement

.

2.

Separate the radiator and the blower assembly.

3.

Remove the evaporator core body retaining screw.

1

2

FE08-0050b  

4.

Remove the evaporator core body.

5.

Remove  the  expansion  valve  (1).  Refer  to

8.2.8.6

 

Expansion Valve Replacement

.

6.

Remove the evaporator temperature sensor (2). Refer to

8.2.8.19

 

Evaporator Temperature Sensor and Heat Core

Temperature Sensor Replacement

.

8-64

Automatic Air-conditioning

Heating, Ventilation and A/C System

Installation Procedure:

FE08-0051b  

1.

Install the evaporator temperature sensor.

2.

Install the expansion valve.

FE08-0052b  

3.

Insert the evaporator core body.

FE08-0053b  

4.

Install  and  tighten  the  evaporator  core  body  retaining
screw.

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

5.

Assemble the evaporator and the blower assembly.

6.

Install the air-conditioning assembly.

Heating, Ventilation and A/C System

Automatic Air-conditioning

8-65

8.2.8.15 Condenser Replacement

Removal Procedure

Warning!

Refer to "Breathing R-134a Warning" in "Warnings and
Notices".

2

1

2

3 3

FE08-0067b

1.

Carry  out  the  air-conditioning  refrigerant  recovery
procedure. Refer to 

8.2.7.10

 

Air-conditioning Refrigerant

Recovery and Filling

.

2.

Remove the radiator upper grille.

3.

Remove the condenser upper air-conditioning hard pipe
fittings (1).

4.

Remove the condenser upper retaining bolts (2).

5.

Remove the condenser front baffle upper retaining bolts
(3).

2

1

1

FE08-0068b

6.

Lift  the  vehicle.  Refer  to 

1.3.1.1

 

Lifting  and  Jacking  the

Vehicle

.

7.

Remove the engine bottom shield. Refer to 

12.10.1.7

 

Left

and Right Engine Bottom Shield Replacement

.

8.

Remove the condenser front baffle lower retaining bolts
and remove the baffle.

9.

Remove the condenser lower air-conditioning hard pipe
fittings (2).

10. Remove the condenser from the vehicle bottom.

8-66

Automatic Air-conditioning

Heating, Ventilation and A/C System