Installation Procedure:

FE08-0027b

1.

Install the blower speed control module and tighten the
retaining screws.

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

2.

Connect the blower speed module harness connector.

8.2.8.9 Blower Motor Replacement

Removal Procedure

1

2

2

2

FE08-0028b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

2.

Disconnect the blower motor harness connector (1).

3.

Remove  the  blower  motor  retaining  screws  (2)  and
remove the blower motor.

Heating, Ventilation and A/C System

Automatic Air-conditioning

8-59

Installation Procedure:

FE08-0029b

1.

Install the blower motor and tighten the retaining screws.

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

2.

Connect the blower motor harness connector.

8.2.8.10 Warm and Cold Air Adjust Motor and
Inside  and  Outside  Circulation  Motor
Replacement

Removal Procedure

FE08-0041b

1.

Remove  the  air-conditioning  assembly.  Refer  to

8.2.8.5

 

Air-conditioning Assembly Replacement

.

2.

Separate the radiator and the blower assembly.

3.

Remove the warm air and cold air adjust motor retaining
screws.

8-60

Automatic Air-conditioning

Heating, Ventilation and A/C System

Installation Procedure:

FE08-0042b

1.

Install  the  warm  air  and  cold  air  adjust  motor  retaining
screws

Torque: 3 Nm (Metric) 2.2 lb-ft (US English)

2.

Assemble the radiator and the blower assembly.

3.

Install the air-conditioning assembly.

Note

Inside and Outside Circulation Motor Replacement
is  the  same  as  that  of  Warm  and  Cold  Air  Adjust
Motor.

8.2.8.11 

Instrument 

Panel 

Air 

Duct

Replacement

Center Air Duct Replacement

Removal Procedure

Note

Please  use  special  tools  to  remove  interior  panels,
otherwise panels will be easily scratched.

FE08-0043b

1.

Remove 

the 

instrument 

panel. 

Refer 

to

11.15.8.1

 

Instrument Cluster Replacement

.

2.

Remove the center air duct panel.

3.

Remove the center air duct.

Heating, Ventilation and A/C System

Automatic Air-conditioning

8-61

Installation Procedure:

FE08-0044b

1.

Install the center air duct.

2.

Install the center air duct panel.

3.

Install the instrument panel.

Instrument Panel Side Air Duct Replacement

Removal Procedure

FE08-0045b

1.

Removal the instrument panel side panel.

2.

Remove the air duct retaining screw.

3.

Use a special tool to remove the side air duct.

Installation Procedure:

1.

Press the side air duct into place.

Note

Both side air ducts replacement is the same.

2.

Install the air duct retaining screw.

3.

Install the instrument panel side panel.

8-62

Automatic Air-conditioning

Heating, Ventilation and A/C System