FE02-0419b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Disconnect the generator harness connector.

FE02-0420b

3.

Remove the generator charging wiring harness retaining
nut.

FE02-0421b

4.

Remove  the  drive  belt.  Refer  to 

2.6.8.3

 

Drive  Belt

Replacement

.

5.

Remove the generator lower retaining bolt.

Engine

Starting / Charging System JL4G18-D

2-579

FE02-0422b

6.

Remove the generator upper retaining bolt.

7.

Remove the generator from the generator bracket.

Installation Procedure:

FE02-0423b

1.

Install and tighten the generator upper retaining bolt.

Torque: 25 Nm (Metric) 18.5 lb-ft (US English)

FE02-0424b

2.

Install and tighten the generator lower retaining bolt.

Torque: 54 Nm (Metric) 40 lb-ft (US English)

2-580

Starting / Charging System JL4G18-D

Engine

FE02-0425b

3.

Install the drive belt.

4.

Install the generator charging wiring harness and tighten
the harness retaining nut.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

FE02-0426b

5.

Connect the generator harness connector.

6.

Connect the battery negative cable.

2.11.8.4 Starter Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnection Warning" in "Warnings
and Notices"

FE02-0427b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Disconnect starter control wiring harness connector.

Engine

Starting / Charging System JL4G18-D

2-581

FE02-0428b

3.

Remove the starter power supply wiring harness retaining
nut.

FE02-0429b

4.

Remove the starter power supply wiring harness.

FE02-0430b

5.

Remove the starter upper retaining bolt.

2-582

Starting / Charging System JL4G18-D

Engine