FE02-0331b

5.

Remove the left side of the fan cover retaining bolt.

FE02-0332b

6.

Remove the fan assembly from the vehicle.

Installation Procedure:

FE02-0333b

1.

Install the fan assembly to the vehicle.

Engine

Cooling System JL4G18-D

2-487

FE02-0334b

2.

Install the right side of the fan cover retaining bolt.

Torque: 9 Nm (Metric) 6.7 lb-ft (US English)

FE02-0335b

3.

Install the left side of the fan cover retaining bolt.

Torque: 9 Nm (Metric) 6.7 lb-ft (US English)

FE02-0336b

4.

Connect the cooling fan motor wiring harness connector.

2-488

Cooling System JL4G18-D

Engine

FE02-0337b

5.

Install the radiator air baffle and deflector.

6.

Connect the battery negative cable.

2.8.8.4 Thermostat Replacement

Removal Procedure:

Warning!

Refer to "Cooling System Service Warning" in "Warnings
and Notices".

FE02-0338b

1.

Discharge  the  engine  coolant.  Refer  to 

2.8.8.1

 

Engine

Coolant Discharge and Filling

.

2.

Loosen  the  radiator  outlet  pipe  clamp  from  the  engine
coolant inlet pipe.

FE02-0339b

3.

Disconnect  the  radiator  outlet  pipe  from  the  engine
coolant inlet pipe.

Engine

Cooling System JL4G18-D

2-489

FE02-0340b

4.

Remove the engine coolant inlet pipe to the cylinder block
retaining nuts.

FE02-0341b

5.

Remove the engine coolant inlet pipe component from the
cylinder block.

FE02-0342b

6.

Remove the thermostat from the cylinder block.

Note

The thermostat and seals are integrated.

7.

Clean  the  engine  coolant  inlet  pipe  and  cylinder  block
mating surface.

2-490

Cooling System JL4G18-D

Engine