FE02-0167b   

2.

Install timing chain and crankshaft sprocket and align the
first  yellow  chain  section  with  the  crankshaft  sprocket
timing mark.

Note

There are total three yellow sections on the timing
chain,  including  two  yellow  chain  section  (a
difference  of  6  links  between  the  sections)  and
aligned  with  the  intake  and  exhaust  camshaft
sprocket timing marks.

FE02-0168b   

3.

Align the second yellow chain section with the intake cam
VVT actuator sprocket timing mark.

FE02-0169b    

4.

Align  the  third  yellow  chain  section  with  the  exhaust
sprocket timing mark.

Engine

Engine Mechanical System JL4G18-D

2-363

FE02-0170b    

5.

Install the timing chain guide rail components.

FE02-0171b    

6.

Install  the  timing  chain  guide  rail  components  retaining
bolts.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

FE02-0172b    

7.

Install the tensioner rail components.

2-364

Engine Mechanical System JL4G18-D

Engine

FE02-0173b    

8.

Install the tensioner rail components retaining bolts.

Torque: 19 Nm (Metric) 14 lb-ft (US English)

FE02-0158b

9.

Install the crankshaft sprocket.

10. Install the timing chain cover and accessories.

Engine

Engine Mechanical System JL4G18-D

2-365

2.6.8.11 Timing Chain Inspection

FE02-0175b

1.

Remove the timing chain cover. Refer to 

2.6.8.9

 

Timing

Chain Cover Replacement

.

2.

Remove the timing chain. Refer to 

2.6.8.10

 

Timing Chain

Replacement

.

3.

Inspect  timing  chain  guide  rail  component  for  cracking,
wear and tear.

4.

If the timing chain guide rail components surface wear is
deeper than 1 mm (0.04 in) then replace the timing chain
guide rail components.

5.

Inspect  timing  chain  tensioner  rail  component  for  wear
and tear.

6.

If the timing chain guide rail components surface wear is
deeper than 1 mm (0.04 in) then replace the timing chain
guide rail components.

7.

Inspect timing chain and sprocket for VVT actuator wear.

8.

Inspect the exhaust camshaft sprocket teeth and the VVT
actuator  sprocket  teeth  and  chain  for  excessive  wear,
damage or stuck.

9.

Inspect the crankshaft timing sprocket teeth and chain for
excessive wear, damage, or stuck.

10. Inspect timing chain tensioner for damaged and gasket

intact. If damaged, replace the timing chain tensioner and
the gasket.

FE02-0176b

11. Inspect  timing  chain  lubrication  nozzles.  If  necessary,

remove  the  oil  pump  assembly.  Check  the  oil  channel.
Refer to 

2.9.8.1

 

Oil Pump Replacement

.

2-366

Engine Mechanical System JL4G18-D

Engine