Content .. 3 4 5 6 ..

Ford Mustang Mach-E (2022 year). Manual in english - page 5

Hints:
•

Do not set a code that uses five of the
same number.

•

Do not use five numbers in sequential
order.

•

The five-digit master code works even
if you have set your own personal code.

Erasing a Personal Code

Enter the five-digit master code.

2. Press and release

1·2

on the keypad

within five seconds.

3. Press and hold

1·2

for two seconds.

You must do this within five seconds
of completing Step 2.

All personal codes erase and only the
five-digit master code works.

Anti-Scan Feature

The keypad goes into an anti-scan mode
if you enter the wrong code seven times.
This mode turns off the keypad for one
minute and the keypad lamp flashes.

The anti-scan feature turns off after:
•

One minute of keypad inactivity.

•

You press the unlock button on the
remote control.

•

You switch the ignition on.

•

You unlock your vehicle using keyless
entry.

USING THE KEYLESS ENTRY
KEYPAD

Unlocking the Doors

E333628

Enter the factory-set five-digit code or your
personal code. You must press each
number within five seconds of each other.

•

Press

3-4

within five seconds to unlock

all doors.

Keyless Entry Keypad

Locking the Doors

E333628

Press and hold

7·8

and

9·0

at the same

time with the driver door closed.

Note:

You do not need to enter the code

first.

KEYLESS ENTRY KEYPAD –
TROUBLESHOOTING

KEYLESS ENTRY KEYPAD –
FREQUENTLY ASKED QUESTIONS

Why does the keypad not accept the
access code?

If you enter the access code too fast
on the keypad, the unlock function
may not work. Slowly re-enter the
access code.

Why does the keypad not function?

The keypad goes into an anti-scan
mode if you enter a wrong code seven
times. The anti-scan mode disables
the keypad for one minute and the red
light flashes.

Keyless Entry Keypad

WHAT IS WALK AWAY LOCK

Walk away lock is a locking feature that
locks the vehicle when you walk away from
the vehicle with the passive key or
authorized phone.

HOW DOES WALK AWAY LOCK
WORK

Walk Away Lock will lock all the doors
when all of the following are met:
•

The vehicle is off.

•

All doors and luggage compartments
have been closed and unlocked.

•

A door or luggage compartment has
been opened and closed without a lock
or unlock occurring after all doors or
luggage compartments have been
closed.

•

Any passive key or authorized phone is
not inside the vehicle.

•

More than 150 seconds has elapsed.

WALK AWAY LOCK
LIMITATIONS

Walk Away Lock does not lock all the doors
when following occur:

•

The vehicle is on.

•

All doors are closed and locked.

•

Any of the doors or luggage
compartments are open.

•

Any passive key or authorized phone is
inside the vehicle.

SWITCHING WALK AWAY
LOCK ON AND OFF

Access the vehicle drawer on the
touchscreen.

2. Press

SETTINGS

3. Press

Vehicle

4. Switch

Walk Away Lock

on or off.

SWITCHING WALK AWAY
LOCK AUDIBLE FEEDBACK ON
AND OFF

Access the vehicle drawer on the
touchscreen.

2. Press

SETTINGS

3. Press

Vehicle

4. Switch

Audible Feedback

on or off.

Walk Away Lock

HOW DOES EASY ENTRY AND
EXIT WORK

This feature moves the driver seat
rearward up to 2 in (5 cm) when you switch
the ignition off. The driver seat returns to
its previous position when you switch the
ignition on.

SWITCHING EASY ENTRY AND
EXIT ON AND OFF

Press

Settings

on the touchscreen.

2. Press

Vehicle

3. Select

Easy Entry/Exit

If you press any adjustment or memory
button when in easy exit mode, the system
cancels the operation.

Easy Entry and Exit

LIFTGATE PRECAUTIONS

WARNING:

It is extremely

dangerous to ride in a cargo area, inside
or outside of a vehicle. In a crash, people
riding in these areas are more likely to be
seriously injured or killed. Do not allow
people to ride in any area of your vehicle
that is not equipped with seats and
seatbelts. Make sure everyone in your
vehicle is in a seat and properly using a
seatbelt. Failure to follow this warning
could result in serious personal injury or
death.

WARNING:

Keep keys out of reach

of children. Do not allow children to
operate or play near an open or moving
power liftgate. You should supervise the
operation of the power liftgate at all
times.

OPENING THE LIFTGATE

OPENING THE LIFTGATE FROM
INSIDE YOUR VEHICLE

E316362

With the transmission in park
(P), access the liftgate settings
on the touchscreen.

Press the vehicle icon located in the
top corner.

2. Press

CONTROLS

3. Press

Access

4. Press the liftgate icon.

Note:

Be careful when opening or closing

the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:

Do not hang anything, for example a

bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.

Note:

Do not leave the liftgate open while

driving. This could damage the liftgate and
its components.

OPENING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE

Unlock the liftgate using an authorized
device.

Note:

If an authorized device is within 3 ft

(1 m) of the liftgate, the liftgate unlocks
when you press the liftgate release button.

E316256

2. Press and release the liftgate control

button.

Note:

Allow the power system to open the

liftgate. Manually pushing or pulling the
liftgate may activate the system’s obstacle
detection feature and stop the power
operation or reverse its direction, replicate
a strut failure, or damage mechanical
components.

Note:

Be careful when opening or closing

the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:

Do not hang anything, for example a

bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.

Liftgate - Vehicles With: Hands-Free Liftgate

Note:

Do not leave the liftgate open while

driving. This could damage the liftgate and
its components.

Switching the Power Liftgate On
or Off

You can switch the power liftgate on or off
through the vehicle settings on your
touchscreen.

When switched off, the liftgate only
unlatches and will not power open or close.

OPENING THE LIFTGATE USING
THE REMOTE CONTROL

E267940

Press the button twice within
three seconds.

Note:

Be careful when opening or closing

the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:

Do not hang anything, for example a

bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.

Note:

Do not leave the liftgate open while

driving. This could damage the liftgate and
its components.

OPENING THE HANDS-FREE
LIFTGATE

Make sure you have the authorized device
within 3 ft (1 m) of the liftgate.

Stand behind your vehicle, and face the
liftgate.

2. Move your foot, in a single-kick motion,

without pausing, under and away from
the rear bumper detection area.

E300799

3. The liftgate opens.

Avoid the following actions when using the
hands-free opening feature:

•

Making physical contact with the
bumper.

•

Holding your foot under the bumper.

•

Sweeping your foot from side to side,
or kicking at an odd angle.

Detection Zones

E312361

The detection area is in the center of the
rear bumper.

Note:

Allow the power system to open the

liftgate. Manually pulling the liftgate may
activate the system’s obstacle detection
feature and stop the power operation or
reverse its direction, replicate a strut failure,
or damage mechanical components.

Liftgate - Vehicles With: Hands-Free Liftgate

Note:

Any physical actions that mimic a

kicking motion such as splashing water,
trailer chains or vacuum hoses may cause
the hands-free liftgate to activate. Switch
the power liftgate off through your vehicle
settings or keep the authorized device away
from the rear bumper detection area.

SETTING THE LIFTGATE
OPENING HEIGHT

Open the liftgate.

2. Stop the liftgate movement by pressing

the control button on the liftgate when
it reaches the desired height.

Note:

Once the liftgate stops moving, you

can manually move it to the desired height.

3. Press and hold the control button on

the liftgate until a tone sounds,
indicating programming is complete.

Note:

You can only use the liftgate control

button to program the height.

Note:

You cannot program the height if the

liftgate position is too low.

4. The power liftgate now opens at the

programmed height. To change the
programmed height, repeat the steps.

Note:

You can fully open the liftgate by

manually pushing it upward to the
maximum open position if it opens in a
lower position.

Note:

The system recalls the new

programmed height until you reprogram it,
even if you disconnect the battery.

CLOSING THE LIFTGATE

CLOSING THE LIFTGATE FROM
INSIDE YOUR VEHICLE

WARNING:

Make sure all persons

are clear of the power liftgate area
before using the power liftgate control.

E316362

With the transmission in park
(P), access the liftgate settings
on the touchscreen.

Select or pull down on the vehicle icon
located in the top corner.

2. Press

CONTROLS

3. Press

Access

4. Select the liftgate icon.

Note:

Make sure that you close the liftgate

before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure. This could damage the
liftgate and its components.

Note:

Make sure the area behind your

vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate. Objects too close to your vehicle,
for example a wall, garage door or another
vehicle may come into contact with the
moving liftgate. This could damage the
liftgate and its components.

Note:

Make sure that you fully close the

liftgate to prevent cargo from falling out.

CLOSING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE

WARNING:

Make sure all persons

are clear of the power liftgate area
before using the power liftgate control.

Liftgate - Vehicles With: Hands-Free Liftgate

E291417

Press and release the liftgate button. A
tone sounds when the liftgate begins to
close.

Note:

Make sure that you close the liftgate

before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure. This could damage the
liftgate and its components.

Note:

Make sure the area behind your

Note:

Make sure you fully close the liftgate

to prevent cargo from falling out.

CLOSING THE LIFTGATE USING
THE REMOTE CONTROL

WARNING:

Make sure all persons

are clear of the power liftgate area
before using the power liftgate control.

E267940

Press the button twice within
three seconds.

Note:

Make sure that you close the liftgate

before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure. This could damage the
liftgate and its components.

Note:

Make sure the area behind your

Note:

Make sure that you fully close the

liftgate to prevent cargo from falling out.

CLOSING THE HANDS-FREE
LIFTGATE

Make sure you have the authorized device
within 3 ft (1 m) of the liftgate.

Stand behind your vehicle, and face the
liftgate.

2. Move your foot, in a single-kick motion,

without pausing, under and away from
the rear bumper detection area.

E300799

3. The liftgate closes.

Note:

A tone sounds when the liftgate

begins to close.

Avoid the following actions when using the
hands-free feature:

Liftgate - Vehicles With: Hands-Free Liftgate

•

Making physical contact with the
bumper.

•

Holding your foot under the bumper.

•

Sweeping your foot from side to side,
or kicking at an odd angle.

Detection Zones

E312361

The detection area is in the center of the
rear bumper.

Note:

Allow the power system to close the

liftgate. Manually pushing the liftgate may
activate the system’s obstacle detection
feature and stop the power operation or
reverse its direction, replicate a strut failure,
or damage mechanical components.

STOPPING THE LIFTGATE
MOVEMENT

Note:

Do not apply sudden excessive force

to the liftgate while it is in motion. This
could damage the power liftgate and its
components.

Note:

Selections will vary depending on

region or options.

You can stop the liftgate movement by
doing any of the following:
•

Pressing the liftgate control button on
the liftgate.

•

Pressing the liftgate control button
inside the vehicle.

•

Pressing the liftgate button on the
remote control twice.

•

Pressing the liftgate button on an
authorized device.

•

Moving your foot under and away from
the center rear bumper in a single-kick
motion.

LIFTGATE OBSTACLE
DETECTION

Closing the Liftgate

The system stops when it detects an
obstacle. A tone sounds and the system
reverses to open. Once you remove the
obstacle, you can power close the liftgate.

Note:

To prevent accidental obstacle

detection, let the power liftgate close
completely before you enter your vehicle.

Opening the Liftgate

The system stops when it detects an
obstacle and a tone sounds. Once you
remove the obstacle, you can continue to
operate the liftgate.

LIFTGATE –
TROUBLESHOOTING

LIFTGATE – WARNING LAMPS

E316362

Illuminates when the liftgate is
not completely closed.

Liftgate - Vehicles With: Hands-Free Liftgate

LIFTGATE – INFORMATION MESSAGES

Action

Message

The liftgate is not completely closed. Close the liftgate.

Liftgate Ajar

Liftgate - Vehicles With: Hands-Free Liftgate

LIFTGATE – FREQUENTLY ASKED
QUESTIONS

Why won't my power liftgate function?

Make sure the transmission is in park
(P), ensure nothing is obstructing the
liftgate path and there is not excessive
weight on the liftgate. If there are
continued issues, the battery voltage
may be low or other system issues.
See an authorized dealer.

Liftgate - Vehicles With: Hands-Free Liftgate

OPENING THE LIFTGATE

OPENING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE

E316256

Press the control button to unlatch the
liftgate and then lift to open.

Note:

Be careful when opening or closing

the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:

Do not hang anything, for example

a bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.

Note:

Do not leave the liftgate open while

driving. This could damage the liftgate and
its components.

OPENING THE LIFTGATE USING
THE REMOTE CONTROL

E267940

Press the button twice within
three seconds. The liftgate
unlocks for 45 seconds, during

which time you can open the liftgate using
the outside control button.

Note:

Be careful when opening or closing

the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:

Do not hang anything, for example a

bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.

Note:

Do not leave the liftgate open while

driving. This could damage the liftgate and
its components.

CLOSING THE LIFTGATE

CLOSING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE

WARNING:

It is extremely

Liftgate - Vehicles With: Manual Liftgate

E315963

A handle is located inside the liftgate to
help with closing.

Note:

Make sure that you fully close the

liftgate to prevent cargo from falling out.

Liftgate - Vehicles With: Manual Liftgate

PASSIVE ANTI-THEFT
SYSTEM

WHAT IS THE PASSIVE ANTI-
THEFT SYSTEM

The passive anti-theft system prevents
someone from starting the vehicle with an
incorrectly coded key.

Note:

Do not leave a duplicate coded key

in your vehicle. Always take the keys and
lock all the doors when leaving your vehicle.

HOW DOES THE PASSIVE ANTI-
THEFT SYSTEM WORK

The passive anti-theft system arms when
you switch the ignition off.

It disarms when the ignition is switched on
with a correctly coded key.

Note:

The system is not compatible with

non-Ford aftermarket remote start systems.

Note:

Do not leave a duplicate coded key

in your vehicle. Always take the keys and
lock all doors when leaving your vehicle.

ANTI-THEFT ALARM SYSTEM

WHAT IS THE ANTI-THEFT ALARM
SYSTEM

The Anti-Theft Alarm System warns you
of an unauthorized entry to your vehicle.

HOW DOES THE ANTI-THEFT
ALARM SYSTEM WORK

When armed, the anti-theft alarm is
triggered in any of the following ways:
•

If someone opens a door, the liftgate
or the hood without a correctly coded
key or remote control.

•

If you turn the power on without a
correctly coded key.

•

If the interior sensors detect movement
inside your vehicle.

•

If the inclination sensors detect an
attempt to raise your vehicle.

•

If someone disconnects the vehicle
battery or the battery backup alarm.

If the anti-theft alarm is triggered, the
alarm horn sounds for 30 seconds and the
direction indicators flash for 5 minutes.

Any further attempts to carry out one of
the above sounds the alarm again.

WHAT ARE THE INTERIOR
SENSORS

The interior sensors are designed to detect
any movement inside your vehicle.

The interior sensors are in the overhead
console.

Note:

Do not cover the interior sensors.

WHAT ARE THE INCLINATION
SENSORS

The inclination sensor is designed to detect
an attempt to raise your vehicle, for
example to remove a wheel or to tow it
away.

ARMING THE ANTI-THEFT ALARM
SYSTEM

The alarm is ready to arm when your
vehicle is switched off.

Security

Lock your vehicle with your remote control
to arm the alarm.

DISARMING THE ANTI-THEFT
ALARM SYSTEM

Disarm the alarm by performing any of the
following actions:
•

Unlock the doors or luggage
compartment with the remote control.

•

Switch your vehicle on or start your
vehicle.

ANTI-THEFT ALARM SYSTEM
SETTINGS

WHAT ARE THE ALARM SECURITY
LEVELS

You can select two levels of alarm security,
all sensors and perimeter sensing.

All Sensors

All sensors is the standard setting.

In all sensors, all equipped sensors are on
when you arm the alarm.

Note:

Do not arm the alarm with all sensors

if passengers, animals or other moving
objects are inside your vehicle.

Perimeter Sensing

In perimeter sensing, the interior sensors
are off when you arm the alarm.

All the other equipped sensors activate
when you arm the alarm in this mode.

SETTING THE ALARM SECURITY
LEVEL

Access the vehicle drawer on the
touchscreen.

Press

SETTINGS

2. Press

Vehicle

3. Press

Alarm System

4. Press

Motion sensors

5. Press a setting.

WHAT IS ASK ON EXIT

You can choose which level of security you
require after you switch the ignition off.

Note:

If you do not choose a setting, the

system defaults to all sensors.

SWITCHING ASK ON EXIT ON AND
OFF

Access the vehicle drawer on the
touchscreen.

Press

SETTINGS

2. Press

Vehicle

3. Press

Alarm System

4. Press

Ask on Exit

5. Press a setting.

Security

SECURITY – TROUBLESHOOTING

SECURITY – INFORMATION MESSAGES

Action

Message

The system has not detected a correctly coded key.

No Key Detected

The system has malfunctioned. Have your vehicle checked
as soon as possible.

Starting System Fault

Displays when the alarm has been triggered due to unauthor-
ized entry.

Vehicle Alarm To Stop
Alarm, Start Vehicle.

Alarm Announcement

Security

Content .. 3 4 5 6 ..