Ford Super Duty (2018 year). Manual - part 15

 

  Index      Ford     Ford Super Duty - service manual 2018 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  13  14  15  16   ..

 

 

Ford Super Duty (2018 year). Manual - part 15

 

 

PRINCIPLE OF OPERATION

MyKey allows you to program keys with
restricted driving modes to promote good
driving habits. You can program the
restrictions to all keys but one. Any keys
that you did not program are administrator
keys or admin keys.

You can use admin keys to:

Create a MyKey with certain vehicle
restrictions.

Program certain MyKey settings.

Clear all MyKey restrictions.

After you program a MyKey, you can view
the following information through the
information display:

The total number of admin keys and
MyKeys for your vehicle.

The total distance a MyKey driver
traveled with your vehicle.

Note:  Every MyKey receives the same
restrictions and settings. You cannot
program them individually.

Note:  For vehicles equipped with a
push-button start switch: When both a
MyKey and an admin key are present when
you start your vehicle, the system recognizes
the admin key only.

Standard Settings

Not every vehicle includes the features
listed below. If your vehicle has this
equipment, then you cannot change the
following settings when using a MyKey:

Seatbelt reminder or Belt-Minder™.
MyKey mutes the audio system until
drivers, and in some instances,
passengers, fasten their seatbelts.

Earlier low-fuel warning. The low-fuel
warning activates earlier for MyKey
drivers, giving them more time to refuel.

Certain driver alerts, stability systems
or parking aids turn on automatically
when you use the MyKey system. For
example, Blind Spot Information
System (BLIS), cross traffic alert, lane
departure warning or forward collision
warning.

Restricted touchscreen operation in
some markets. For example, MyKey
may prevent manual navigation
destination input while the vehicle is in
any gear other than park (P) or when
the vehicle reaches a certain rate of
speed.

Satellite radio adult content
restrictions, if this feature is available
in your market.

Note: MyKey drivers may be able to switch
the lane departure warning feature off, but
this feature turns back on automatically
with every new key cycle.

Note: MyKey drivers can turn on the forward
collision warning when it is turned off by an
admin key.

Note: If your vehicle includes an AM/FM
radio or a very basic audio system, then the
radio may not mute.

Optional Settings

You can configure certain vehicle feature
settings when you first create a MyKey. You
can also change the settings afterward
with an admin key.

Note: Not every feature applies to every
vehicle in every market. When they are
available for your vehicle, then they appear
in your information display, providing
choices to switch them on or off, or to select
a more specific setting.

Various vehicle speed limits so the
MyKey driver cannot exceed certain
speeds. The information display shows
warnings followed by an audible tone
when the MyKey driver reaches the set
speed. You cannot override the set
speed by fully depressing the
accelerator pedal.

WARNING

Do not set MyKey maximum speed
limit to a limit that will prevent the
driver from maintaining a safe speed

considering posted speed limits and
prevailing road conditions. The driver is
always responsible to drive in accordance
with local laws and prevailing conditions.
Failure to do so could result in accident or
injury.

Various vehicle speed reminders so
MyKey drivers know when their vehicle
speed approaches the limits. Warnings
appear in your information display and
a tone sounds when the MyKey drivers
exceed the set vehicle speed.

The audio system's maximum volume
limits to 45% so MyKey drivers can
concentrate on the road. A message
appears in the information display
when MyKey drivers attempt to exceed
the limited volume. MyKey also
disables the automatic volume control.

Always on setting. This setting forces
certain features to remain on and
active for MyKey drivers. For example,
E911 or emergency assistance and the
do not disturb features stay on even if
a MyKey driver uses the feature's
control to switch it off.

Note: If your vehicle includes an AM/FM
radio or a very basic audio system, then the
radio may not mute.

CREATING A MYKEY

Use the information display to create a
MyKey.

1.

Switch the ignition on using the key or
the transmitter you want to program.
If your vehicle has a push-button start,
place the transmitter into the back
position. See Passive Anti-Theft
System (page 76).

2. Access the main menu in the

information display and then scroll
through the menus to begin
programming your MyKey.  See
Information Displays (page 114).

3. Follow the instructions in the display.

4. A confirmation message appears in the

display after you finish programming
your MyKey. The programmed
restrictions apply when you key off,
open and close driver door and restart
your vehicle with the programmed key
or transmitter.

Note: Make sure you label the programmed
MyKey so you can distinguish it from the
admin keys.

You can also program the optional MyKey
settings.

Programming or Changing
Configurable Settings

Use the information display to program or
change your optional MyKey settings.

1.

Switch the ignition on using the key or
the transmitter you want to program.

2. Access the main menu in the

information display and then scroll
through the menus to change the
settings of your MyKey.  See
Information Displays (page 114).

3. Follow the instructions in the display.

4. A confirmation message appears in the

display after you finish programming
your MyKey. The programmed
restrictions apply when you key off,
open and close the driver door and
restart your vehicle with the
programmed key or transmitter.

Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. If you
switch the engine off, you must use an
admin key to change or clear your optional
MyKey settings.

CLEARING ALL MYKEYS

When you clear your MyKeys, you remove
all restrictions and return all MyKeys to
their original admin key status at once. To
clear all MyKeys of all MyKey settings, use
the information display.

1.

Switch the ignition on using an admin
key.

2. Access the main menu in the

information display and then scroll
through the menus to begin clearing
your MyKey programming.  See
Information Displays (page 114).

3. Follow the instructions in the display.
4. A confirmation message appears in the

display after you finish clearing your
MyKeys.

Note: When you clear your MyKeys, you
remove all restrictions and return all MyKeys
to their original admin key status. You
cannot remove the MyKey restrictions
individually.

CHECKING MYKEY SYSTEM
STATUS

You can find information about your
programmed MyKeys by using the
information display.  See Information
Displays (page 114).

MyKey Distance

Tracks the distance when drivers use a
MyKey. The only way to delete the
accumulated distance is by using an admin
key to clear all MyKeys. If the distance does
not accumulate as expected, then the
intended user is not using the MyKey, or an
admin key user recently cleared and then
recreated a MyKey.

Number of MyKeys

Indicates the number of MyKeys
programmed to your vehicle. Use this
feature to detect how many MyKeys you
have for your vehicle and determine when
all MyKeys have been deleted.

Number of Admin Keys

Indicates how many admin keys are
programmed to your vehicle. Use this
feature to determine how many admin
keys you have for your vehicle, and detect
if an additional MyKey has been
programmed.

USING MYKEY WITH REMOTE
START SYSTEMS

MyKey is not compatible with non
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.

MYKEY TROUBLESHOOTING

Potential causes

Condition

· The key or transmitter used to start the
vehicle does not have admin privileges.

I cannot create a MyKey.

· Vehicles with keyless start: Make sure you
place the transmitter into the backup posi-
tion. See Passive Anti-Theft System
(page 76).
· The key or transmitter used to start the
vehicle is the only admin key. There always
has to be at least one admin key.
· SecuriLock passive anti-theft system is
disabled or in unlimited mode.

· The key or transmitter used to start the
vehicle does not have admin privileges.

I cannot program the configurable settings.

· There are no MyKeys programmed to the
vehicle. See Creating a MyKey (page 64).

· An admin transmitter is present when you
started your vehicle.

For vehicles with keyless start: No MyKey
restrictions are available when starting the
vehicle.

· There are no MyKeys programmed to the
vehicle.  See Creating a MyKey (page 64).

· The key or transmitter used to start the
vehicle does not have admin privileges.

I cannot clear the MyKeys.

· No MyKeys are created.  See Creating a
MyKey (page 64).

· Purchase a new key or transmitter from
your authorized dealer.

I lost the only admin key.

· Program a spare key or transmitter. You
may need to see your authorized dealer.
See Passive Anti-Theft System (page
76).

I lost a key.

· The MyKey user is not using the MyKey.

MyKey distances do not accumulate.

· An admin key holder cleared the MyKeys
and created new MyKeys.
· The key system has been reset.

 

 

 

 

 

 

 

Content   ..  13  14  15  16   ..