Ford Focus Electric (2018 year). Manual - part 24

 

  Index      Ford     Ford Focus Electric - service manual 2018 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  22  23  24  25   ..

 

 

Ford Focus Electric (2018 year). Manual - part 24

 

 

E72507

Press the button to clear the
heated rear window of thin ice
and fog.  The heated rear

window will automatically turn off after a
short period of time.

Note:  Do not use razor blades or other
sharp objects to clean or remove decals
from the inside of the heated rear window.
The vehicle warranty does not cover
damage caused to the heated rear window
grid lines.

Heated Exterior Mirrors

 (If Equipped)

E72507

When you switch the heated rear
window on, the heated exterior
mirrors will automatically turn

on.

Note: Do not remove ice from the mirrors
with a scraper or adjust the mirror glass
when it is frozen in place.

Note: Do not clean the mirror housing or
glass with harsh abrasives, fuel or other
petroleum-based cleaning products.

CABIN AIR FILTER

Your vehicle is equipped with a cabin air
filter. It is located behind the center
console.

The particulate filtration system reduces
the concentration of airborne particles
such as dust, spores and pollen in the air
supplied to the interior of your vehicle.

Note: Make sure you have a cabin air filter
installed at all times. This prevents foreign
objects from entering the system. Running
the system without a filter in place could
result in degradation or damage to the
system.

The particulate filtration system gives you
and your passengers the following
benefits:

It improves your driving comfort by
reducing particle concentration.

It improves the interior compartment
cleanliness.

It protects the climate control
components from particle deposits.

Replace the filter at regular intervals.  See
Scheduled Maintenance (page 320).

For additional cabin air filter information,
or to replace the filter, see an authorized
dealer.

REMOTE START

The climate control system adjusts the
cabin temperature during remote start.

You cannot adjust the system during
remote start operation. Switch on the
ignition to return the system to its previous
settings. You can now make adjustments.
You need to switch on certain
vehicle-dependent features, such as:

Heated mirrors.

Heated rear window.

You can adjust the settings using the
information display controls.  See
Information Displays (page 80).

Note:  You can control the system through
SYNC using a smartphone app.  See Apps
(page 288).

Automatic Settings

You can set the climate control to operate
in AUTO mode through the information
display setting: Remote Start > Climate
Control > Heater-A/C > Auto. The climate
control system automatically sets the
interior temperature to 72°F (22°C).

In hot weather, the system is set to 72°F
(22°C).

In cold weather, the system is set to 72°F
(22°C). The rear defroster and heated
mirrors automatically turn on.

Last Settings

You can set the climate control to operate
using the last climate control settings
through the information display setting:
Remote Start > Climate Control >
Heater–A/C > Last Settings. The climate
control system automatically uses the
settings last selected before you turned
off the vehicle.

Heated and Cooled Devices

Heated devices typically switch on during
cold weather, and cooled devices during
hot weather.

SITTING IN THE CORRECT
POSITION

WARNINGS

Do not recline the seatback too far
as this can cause the occupant to
slide under the seatbelt, resulting in

serious injury in the event of a collision.

Always sit upright against your
seatback with your feet on the floor.

Do not place objects higher than the
top of the seat backrest. Failure to
follow this instruction could result in

personal injury or death in the event of a
sudden stop or crash.

E68595

When you use them properly, the seat,
head restraint, seatbelt and airbags will
provide optimum protection in the event
of a crash.

We recommend that you follow these
guidelines:

Sit in an upright position with the base
of your spine as far back as possible.

Do not recline the seat backrest more
than 30°.

Adjust the head restraint so that the
top of it is level with the top of your
head and as far forward as possible.
Make sure that you remain
comfortable.

Keep sufficient distance between
yourself and the steering wheel. We
recommend a minimum of 10 in
(25 cm) between your breastbone and
the airbag cover.

Hold the steering wheel with your arms
slightly bent.

Bend your legs slightly so that you can
press the pedals fully.

Position the shoulder strap of the
seatbelt over the center of your
shoulder and position the lap strap
tightly across your hips.

Make sure that your driving position is
comfortable and that you can maintain full
control of your vehicle.

HEAD RESTRAINTS

WARNINGS

To minimize the risk of neck injury in
the event of a crash, the driver and
passenger occupants should not sit

in or operate the vehicle, until the head
restraint is placed in its proper position.
The driver should never adjust the head
restraint while the vehicle is in motion.

The adjustable head restraint is a
safety device. Whenever possible, it
should be installed and properly

adjusted when the seat is occupied. Failure
to adjust the head restraint properly could
reduce its effectiveness during certain
impacts.

Install the head restraint properly to
help minimize the risk of neck injury
in the event of a crash.

Note: Adjust the seatback to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.

Front seat and rear seat outboard head
restraints

E138642

Rear center head restraint

E198013

The head restraints consist of:

An energy absorbing head
restraint.

A

Two steel stems.

B

Guide sleeve adjust and release
button.

C

Guide sleeve unlock and remove
button.

D

Adjusting the Head Restraint

Raising the Head Restraint

Pull the head restraint up.

Lowering the Head Restraint

1.

Press and hold button C.

2. Push the head restraint down.

Removing the Head Restraint

1.

Pull the head restraint up until it
reaches its highest position.

2. Press and hold buttons C and D.
3. Pull the head restraint up.

Note: For the front head restraints, you may
need to use a key or similar object to release
the head restraint. Press the key into the
guide sleeve unlock and remove button to
release the head restraint.

Installing the Head Restraint

Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.

Tilting Head Restraints 

 (If Equipped)

The front head restraints tilt for extra
comfort. To tilt the head restraint, do the
following:

 

 

 

 

 

 

 

Content   ..  22  23  24  25   ..