Ford Explorer (2018 year). Manual - part 31

MyKey

Action

Message

You cannot program a MyKey during key programming.

MyKey Not Created

MyKey is active.

MyKey Active Drive

Safely

When starting your vehicle, a MyKey is in use and the MyKey

speed limit is on.

Speed Limited to XX

MPH/km/h

When a MyKey is in use, the MyKey speed limit is on and your

vehicle speed is approaching 80 mph (130 km/h).

Vehicle Near Top Speed

MyKey is active.

Check Speed Drive

Safely

A MyKey is in use and Belt-Minder is active.

Buckle Up to Unmute

Audio

You attempted to program a spare key using two existing

MyKeys.

Could Not Program

Integrated Key

Park Aid

Action

Message

The system has detected a condition that requires service.

Contact an authorized dealer.  See Principle of Operation

(page 202).

Check Park Aid

The system has detected a condition that requires service.

Contact an authorized dealer. See Principle of Operation

(page 202).

Check Rear Park Aid

Displays the park aid status.

Front Park Aid On Off

Displays the park aid status.

Rear Park Aid On Off

Park Brake

Action

Message

You have set the parking brake and you have driven the vehicle

more than 3 mph (5 km/h). If the warning stays on after you

have released the parking brake, contact an authorized dealer.

Park Brake Engaged

Power Steering

Action

Message

The power steering system has detected a condition that

requires service. Contact an authorized dealer.

Steering Malfunction

Service Now

The power steering system is not working. Stop your vehicle

at a safe place. Contact an authorized dealer.

Service Power Steering

Now

The power steering system has detected a condition within
the power steering system, or passive entry or passive start

system requires service. Contact an authorized dealer.

Steering Assist Fault

You need to turn the steering wheel in order to disengage the

steering lock.

Steering column lock:
Remove and re-insert

key while turning wheel

to unlock

Pre-Collision Warning System

Action

Message

A fault with the system has occurred. Contact an authorized

dealer.

Pre-Collision Warning

Malfunction

You have a blocked sensor due to bad weather, ice, mud or

water in front of the radar sensor. You can typically clean the

sensor to resolve.  See Pre-Collision Assist (page 233).

Pre-Collision Warning

Not Available Sensor

Blocked See Manual

A fault with the system has occurred. Contact an authorized

dealer.

Pre-Collision Warning

Not Available

Remote Start

Action

Message

A reminder to apply the brake and push the gearshift button

to drive your vehicle after a remote start.

To Drive: Press Brake

and Gear Shift Button

Seats

Action

Message

Objects are by the passenger seat. After you move the objects

away from the seat, if the warning stays on or continues to

come on, contact an authorized dealer as soon as possible.

Occupant Sensor

BLOCKED Remove

Objects Near Passenger

Seat

A reminder that memory seats are not available while driving.

Memory Recall Not

Permitted While Driving

Shows where you have saved your memory setting.

Memory X Saved

Starting System

Action

Message

A reminder to apply the brake when starting your vehicle.

To START Press Brake

The starter has exceeded its cranking time in attempting to

start your vehicle.

Cranking Time Exceeded

The starter is attempting to start your vehicle.

Engine Start Pending

Please Wait

The system has cancelled the pending start.

Pending Start Cancelled

Tire Pressure Monitoring System

Action

Message

One or more tires on your vehicle have low tire pressure.  See

Tire Pressure Monitoring System (page 326).

LOW Tire Pressure

The tire pressure monitoring system is malfunctioning. If the

warning stays on or continues to come on, contact an

authorized dealer. See Tire Pressure Monitoring System

(page 326).

Tire Pressure Monitor

Fault

A tire pressure sensor is malfunctioning, or your spare tire is

in use. If the warning stays on or continues to come on, contact
an authorized dealer as soon as possible.  See Tire Pressure

Monitoring System (page 326).

Tire Pressure Sensor

Fault

Terrain Management System

Action

Message

Displays terrain management normal mode is currently active.

Normal Mode Active

Displays terrain management snow, gravel, grass mode is

currently active.

Snow, Gravel, Grass

Mode Active

Displays terrain management mud, ruts mode is currently

active.

Mud, Rut Mode Active

Displays terrain management sand mode is currently active.

Sand Mode Active

Displays when the terrain management system detects an

error.

Terrain Management

System Fault

Displayed when terrain management mode cannot be

changed at the time of your request.

Mode Change Not

Accepted, Retry

Traction Control

Action

Message

Displays the status of the traction control system.  See Using

Traction Control (page 196).

Traction Control Off

Displays the status of the traction control system.  See Using

Traction Control (page 196).

Traction Control On

Trailer

Action

Message

Displays when the trailer sway control has detected a trailer

sway.  See Trailer Sway Control (page 245).

Trailer Sway Reduce

Speed