Ford E-450 (2018 year). Manual - part 10

Autolock Feature

The autolock feature locks all the doors
when:
•

All doors are closed.

•

The ignition is on.

•

You shift into any gear putting your
vehicle in motion.

•

The ignition is on, all the doors are
closed and your vehicle has been in
motion at a speed greater than 12 mph
(20 km/h).

Autounlock Feature

The autounlock feature unlocks all the
doors when:
•

Your vehicle comes to a stop and you
switch the ignition off or to accessory.

•

You open the driver door within 10
minutes of switching the ignition off or
to accessory.

Note: If you electronically lock your vehicle
after you switch the ignition off with the
driver door closed, the doors do not
autounlock.

Enabling or Disabling Autolock and
Autounlock

You can enable or disable the autolock and
autounlock features independently of each
other.

To enable or disable autolock, do the
following:

1.

Switch the ignition on.

2. Press the power door unlock control

three times.

3. Switch the ignition off.

4. Press the power door unlock control

three times.

5. Switch the ignition on. The horn sounds

indicating your vehicle is in
programming mode.

6. Press the power door unlock control

and within five seconds, press the
power door lock control. The horn
sounds once if disabled or twice if
enabled.

7.

Switch the ignition off. The horn sounds
indicating programming is complete.

Note: You can also switch this feature on
or off using the information display.  See
Information Displays (page 56).

To enable or disable autounlock, do the
following:

1.

Switch the ignition on.

2. Press the power door unlock control

three times.

3. Switch the ignition off.

4. Press the power door unlock control

three times.

5. Switch the ignition on. The horn sounds

indicating your vehicle is in
programming mode.

6. Press the power door lock control and

within five seconds, press the power
door unlock control. The horn sounds
once if disabled or twice if enabled.

7.

Switch the ignition off. The horn sounds
indicating programming is complete.

Note: You can also switch this feature on
or off using the information display.  See
Information Displays (page 56).

Illuminated Entry

The interior lamps and some exterior
lamps illuminate when you unlock the
doors with the remote control.

The lamps turn off if:
•

The ignition is on.

•

You press the remote control lock
button.

•

25 seconds have elapsed.

The lamps do not turn off if:
•

You switch them on with the lighting
control.

•

Any door is open.

PASSIVE ANTI-THEFT
SYSTEM

 (If Equipped)

Note: The system is not compatible with
non-Ford aftermarket remote start systems.
Use of these systems may result in vehicle
starting problems and a loss of security
protection.

Note: Metallic objects, electronic devices
or a second coded key on the same key
chain may cause vehicle starting problems
if they are too close to the key when starting
the engine. Prevent these objects from
touching the coded key while starting the
engine. Switch the ignition off, move all
objects on the key chain away from the
coded key and restart the engine if a
problem occurs.

Note: Do not leave a duplicate coded key
in the vehicle. Always take your keys and
lock all doors when leaving the vehicle.

SecuriLock®

The system is an engine immobilization
system. It is designed to help prevent the
engine from being started unless a
correctly coded key for your vehicle is used.
Using an incorrectly coded key may
prevent the engine from starting. A
message may appear in the information
display.

If you are unable to start the engine with a
correctly coded key, a malfunction has
happened and a message may appear in
the information display.

Automatic Arming

The engine immobilization system arms
immediately after you switch the ignition
off.

Automatic Disarming

Switching the ignition on with a correctly
coded key disarms the engine
immobilization system.

Replacement Keys

The integrated keyhead transmitter
functions as a programmed ignition key
that operates all the locks and starts your
vehicle, as well as a remote control.

If your keys are lost or stolen and you do
not have a spare correctly coded key, you
will need to have your vehicle towed to an
authorized dealer. You need to erase the
coded keys from your vehicle and program
new coded keys.

Store an extra correctly coded key away
from the vehicle in a safe place to help
prevent any inconveniences. See an
authorized dealer to purchase additional
spare or replacement keys.

Note: Your vehicle comes with two
integrated keyhead transmitters.

Programming a Spare Integrated
Keyhead Transmitter

You can program your own integrated
keyhead transmitter or standard
SecuriLock coded keys to your vehicle. This
procedure will program both the engine
immobilizer keycode and the remote entry
portion of the remote control to your
vehicle

Only use integrated keyhead transmitters
or standard SecuriLock keys.

You must have two previously
programmed correctly coded keys and the
new unprogrammed key readily accessible.
See an authorized dealer to have the spare
key programmed if two previously
programmed correctly coded keys are not
available.

Read and understand the entire procedure
before you begin.

1.

Insert the first previously programmed
correctly coded key into the ignition.

2. Switch the ignition from off to on. Keep

the ignition on for at least three
seconds, but no more than 10 seconds.

3. Switch the ignition off and remove the

first correctly coded key from the
ignition.

4. After three seconds but within 10

seconds of switching the ignition off,
insert the second previously correctly
coded key into the ignition.

5. Switch the ignition from off to on. Keep

the ignition on for at least three
seconds, but no more than 10 seconds.

6. Switch the ignition off and remove the

second previously programmed
correctly coded key from the ignition.

7.

After three seconds but within 10
seconds of switching the ignition off
and removing the previously
programmed correctly coded key,
insert the new unprogrammed key into
the ignition.

8. Switch the ignition from off to on. Keep

the ignition on for at least six seconds.

9. Remove the newly programmed

correctly coded key from the ignition.

If the key has been successfully
programmed it will start the engine and
operate the remote entry system (if the
new key is an integrated keyhead
transmitter).

If the key was not successfully
programmed, wait 10 seconds and repeat
Steps 1 through 8. If you are still
unsuccessful, take your vehicle to an
authorized dealer.

Note: You can program a maximum of eight
coded keys to your vehicle. All eight can be
integrated keyhead transmitters.