Index Manuals Fiat 500X (2022 year). Manual in english

Search copyright infringement

Content .. 1 2 ..

Fiat 500X (2022 year). Manual in english - page 1

7

INTRODUCTION

Dear Customer,
Congratulations on the purchase of your new FIAT® vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. This

Owner's Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your

vehicle. It is supplemented by customer-oriented documents. Within this information, you will find a description of the services that FCA US LLC offers to its

customers as well as the details of the terms and conditions for maintaining its validity. Please take the time to read all of these publications carefully before

driving your vehicle for the first time. Following the instructions, recommendations, tips, and important warnings in this manual will help ensure safe and

enjoyable operation of your vehicle.
This Owner's Manual describes all versions of this vehicle. Options and equipment dedicated to specific markets or versions are not expressly indicated in the

text. Therefore, you should only consider the information that is related to the trim level, engine, and version that you have purchased. Any content introduced

throughout the Owner's Information, which may or may not be applicable to your vehicle, will be identified with the wording “If Equipped”. All data contained in

this publication are intended to help you use your vehicle in the best possible way. FCA US LLC aims at a constant improvement of the vehicles produced. For

this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized

dealer.
When it comes to service, remember that authorized dealers know your vehicle best, have factory-trained technicians, genuine Mopar® parts, and care about

your satisfaction.

1

-------------------------------------------------------------------------------------------------------------------------------------------------------------

8

SYMBOLS KEY

If you do not read this entire Owner’s Manual, you may miss important

information. Observe all Cautions and Warnings.

ROLLOVER WARNING

Utility vehicles have a significantly higher rollover rate than other types of

vehicles. This vehicle has a higher ground clearance and a higher center of

gravity than many passenger vehicles. It is capable of performing better in a

wide variety of off-road applications. Driven in an unsafe manner, all vehicles

can go out of control. Because of the higher center of gravity, if this vehicle is

out of control it may roll over while some other vehicles may not.
Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions

that can cause loss of vehicle control. Failure to operate this vehicle safely may

result in a collision, rollover of the vehicle, and severe or fatal injury. Drive

carefully.

Rollover Warning Label

Failure to use the driver and passenger seat belts provided is a major cause of

severe or fatal injury. In fact, the U.S. government notes that the universal use

of existing seat belts could cut the highway death toll by 10,000 or more each

year and could reduce disabling injuries by two million annually. In a rollover

crash, an unbelted person is significantly more likely to die than a person

wearing a seat belt. Always buckle up.

WARNING!

These statements are against operating

procedures that could result in a collision, bodily

injury and/or death.

CAUTION!

These statements are against procedures that

could result in damage to your vehicle.

NOTE:

A suggestion which will improve installation,

operation, and reliability. If not followed, may

result in damage.

TIP:

General ideas/solutions/suggestions on easier

use of the product or functionality.

PAGE REFERENCE

ARROW

Follow this reference for additional information on

a particular feature.

FOOTNOTE

Supplementary and relevant information

pertaining to the topic.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

9

VEHICLE MODIFICATIONS/ALTERATIONS

SYMBOL GLOSSARY

Some car components have colored labels with symbols indicating

precautions to be observed when using this component. It is important to

follow all warnings when operating your vehicle. See below for the definition of

each symbol

NOTE:

Warning and Indicator lights are different based upon equipment options and

current vehicle status. Some telltales are optional and may not appear.

WARNING!

Any modifications or alterations to this vehicle could seriously affect its

roadworthiness and safety and may lead to a collision resulting in serious

injury or death.

Red Warning Lights

Air Bag Warning Light

Brake Warning Light

Battery Charge Warning Light

Coolant Temperature Warning Light

Drowsiness Detected Warning Light

Door Open Warning Light

Electric Power Steering (EPS) Fault Warning Light

Electronic Throttle Control (ETC) Warning Light

Hood Open Warning Light

Oil Pressure Warning Light

Seat Belt Reminder Warning Light

Red Warning Lights

1

-------------------------------------------------------------------------------------------------------------------------------------------------------------

10

Transmission Fault Warning Light

Vehicle Security Warning Light

Trunk Open Warning Light

Yellow Warning Lights

Adaptive Cruise Control (ACC) Fault Warning Light

Anti-Lock Brake System (ABS) Warning Light

Audio System Failure Light

Electronic Park Brake Warning Light

Red Warning Lights

Electronic Stability Control (ESC) Active Warning Light

Electronic Stability Control (ESC) OFF Warning Light

Drive Mode System Overheating

Exterior Light Failure Indicator Light

Loose Fuel Filler Cap Warning Light

Low Fuel Warning Light

LaneSense Warning Light

Service LaneSense Warning Light

Yellow Warning Lights

-------------------------------------------------------------------------------------------------------------------------------------------------------------

11

Engine Check/Malfunction Indicator Warning Light (MIL)

Service Warning Light

Service Stop/Start System Warning Light

Tire Pressure Monitoring System (TPMS) Warning Light

Transmission Temperature Warning Light

Drowsiness Detected System Fault Warning Light

Yellow Indicator Lights

Exterior Bulb Failure Indicator Light

Yellow Warning Lights

Full Brake Control System Indicator Light

Full Brake Control System Off Indicator Light

Fuel Cutoff Failure Light

Fuel Cutoff Indicator Light

Fuel Level Sensor Failure

Icy Road Condition Indicator Light

Immobilizer Fail/VPS Electrical Alarm Indicator Light

Yellow Indicator Lights

1

-------------------------------------------------------------------------------------------------------------------------------------------------------------

12

Green Indicator Lights

Sport Mode Indicator Light

Cruise Control Set Indicator Light

Front Fog Indicator Light

LaneSense Indicator Light

Parking/Headlights On Indicator Light

Stop/Start Active Indicator Light

Turn Signal Indicator Lights

White Indicator Lights

LaneSense Indicator Light

Light Sensor Failure Indicator Light

Speed Warning Indicator Light

Sport Mode Indicator Light

Idle Coasting Indicator Light

-------------------------------------------------------------------------------------------------------------------------------------------------------------

13

Blue Indicator Lights

High Beam Indicator Light

Gray Indicator Lights

Cruise Control Ready/Canceled Indicator Light

1

-------------------------------------------------------------------------------------------------------------------------------------------------------------

14

GETTING TO KNOW YOUR VEHICLE

KEYS

K

EY

F

OB

Your vehicle is equipped with a key fob which

supports Passive Entry, Remote Keyless Entry

(RKE), Keyless Enter ‘n Go™ (if equipped), and

Remote Start (if equipped). The key fob allows you

to lock or unlock the doors and liftgate or activate

the Panic Alarm from distances up to

approximately 66 ft (20 m). The key fob does not

need to be pointed at the vehicle to activate the

system. The key fob also contains an emergency

key, which is stored in the rear of the key fob.
NOTE:

The key fob’s wireless signal may be blocked if the

key fob is located next to a mobile phone, laptop,

or other electronic device. This may result in poor

performance.

Keyless Ignition Key Fob

In case the ignition switch does not change with

the push of a button, the key fob may have a low or

fully depleted battery. A low key fob battery can be

verified by referring to the instrument cluster,

which will display directions to follow

To Unlock/Lock The Doors And Liftgate

Push and release the unlock button on the key fob

once to unlock the driver’s door, or twice within five

seconds to unlock all the doors and the liftgate. To

lock all the doors and the liftgate, push the lock

button once.
When the doors are unlocked, the turn signals will

flash and the illuminated entry system will be

activated. When the doors are locked, the turn

signals will flash and the horn will chirp.
NOTE:

If the vehicle is unlocked by a key fob, and no door

is opened within 60 seconds, the vehicle will relock

and if equipped, the security system will arm.
All doors can be programmed to unlock on the first

push of the unlock button within Uconnect Settings

Key Left Vehicle Feature — If Equipped

If a valid key fob is no longer detected inside the

vehicle while the vehicle’s ignition system is in the

ON/RUN or START position, the message “Key Left

Vehicle” will be shown in the instrument cluster

display along with an interior chime. An exterior

audible and visual alert will also be activated to

warn the driver.

1 — Unlock
2 — Emergency Key
3 — Lock
4 — Remote Start
5 — PANIC

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR VEHICLE

15

The vehicle’s horn will rapidly chirp three times

along with a single flash of the vehicle’s exterior

lights.
NOTE:



The doors have to be open and then closed in

order for the vehicle to check for the presence of

a key fob; the Key Left Vehicle feature will not

activate until all of the doors are closed.



These alerts will not be activated in situations

where the vehicle’s engine is left running with

the key fob inside.

Replacing The Battery In The Key Fob

The recommended replacement battery is one

CR2032 battery.
NOTE:



Customers are recommended to use a battery

obtained from Mopar®. Aftermarket coin

battery dimensions may not meet the original

OEM coin battery dimensions.



Perchlorate Material — special handling may

apply. See www.dtsc.ca.gov/hazardouswaste/

perchlorate for further information.



Do not touch the battery terminals that are on

the back housing or the printed circuit board.

1. Remove the emergency key (2) by sliding the

emergency key release (1) on the back of the

key fob and pulling the emergency key out

with your other hand.

Emergency Key Removal

2. Separate the key fob halves using a #2 flat

blade screwdriver or a coin, and gently pry the

two halves of the key fob apart. Make sure not

to damage the seal during removal.

Emergency Key Removal

Separating Case With A Coin

1 — Emergency Key Release Button
2 — Emergency Key

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

16

GETTING TO KNOW YOUR VEHICLE

(Continued)

Key Fob Battery Replacement

3. Remove the back cover to access and replace

the battery. When replacing the battery, match

the (+) sign on the battery to the (+) sign on the

inside of the battery clip, located on the back

cover. Avoid touching the new battery with your

fingers. Skin oils may cause battery deterio

-

ration. If you touch a battery, clean it with

rubbing alcohol.

4. To assemble the key fob case, snap the two

halves together.

Programming And Requesting Additional

Key Fobs

Programming the key fob may be performed by an

authorized dealer.
NOTE:



Once a key fob is programmed to a vehicle, it

cannot be repurposed and reprogrammed to

another vehicle.



Only key fobs that are programmed to the

vehicle electronics can be used to start and

operate the vehicle. Once a key fob is

programmed to a vehicle, it cannot be

programmed to any other vehicle.

Duplication of key fobs may be performed at an

authorized dealer. This procedure consists of

programming a blank key fob to the vehicle

electronics. A blank key fob is one that has never

been programmed.
NOTE:



When having the Sentry Key Immobilizer system

serviced, bring all vehicle keys with you to an

authorized dealer.



Keys must be ordered to the correct key cut to

match the vehicle locks.

WARNING!



The integrated key fob contains a coin cell

battery. Do not ingest the battery; there is a

chemical burn hazard. If the coin cell battery is

swallowed, it can cause severe internal burns

in just two hours and can lead to death.



If you think a battery may have been swal

-

lowed or placed inside any part of the body,

seek immediate medical attention.



Keep new and used batteries away from chil

-

dren. If the battery compartment does not

close securely, stop using the product and

keep it away from children.

WARNING!

WARNING!



Always remove the key fobs from the vehicle

and lock all doors when leaving the vehicle

unattended.



For vehicles equipped with Keyless

Enter ‘n Go™, always remember to place the

ignition in the OFF position.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR VEHICLE

17

SENTRY KEY

The Sentry Key Immobilizer system prevents

unauthorized vehicle operation by disabling the

engine. The system does not need to be armed or

activated. Operation is automatic, regardless of

whether the vehicle is locked or unlocked.
The system uses a key fob, keyless push button

ignition and a Radio Frequency (RF) receiver to

prevent unauthorized vehicle operation. Therefore,

only key fobs that are programmed to the vehicle

can be used to start and operate the vehicle. The

system will shut the engine off in two seconds if an

incorrect key fob is used to start the engine.
After placing the ignition switch in the ON/RUN

position, the Vehicle Security Light will turn on for

three seconds for a bulb check. If the light remains

on after the bulb check, it indicates that there is a

problem with the electronics. In addition, if the light

begins to flash after the bulb check, it indicates

that someone used an invalid key fob to start the

engine. Either of these conditions will result in the

engine being shut off after two seconds.
If the Vehicle Security Light turns on during normal

vehicle operation (vehicle running for longer than

10 seconds), it indicates that there is a fault in the

electronics. Should this occur, have the vehicle

serviced as soon as possible by an authorized

dealer.

All of the key fobs provided with your new vehicle

have been programmed to the vehicle electronics

IGNITION SWITCH

K

EYLESS

E

NTER

‘

N

G

O

™ I

GNITION

This feature allows the driver to operate the

ignition switch with the push of a button as long as

the key fob is in the passenger compartment.
The START/STOP ignition button has three

operating positions. These positions are OFF, ON,

and RUN.

START/STOP Ignition Button

The push button ignition can be placed in the

following positions:
OFF



The engine is stopped.



No electrical devices are available.

ON



The vehicle is not running.



Some electrical devices (power locks, alarm,

etc.) are still available.

RUN



Driving mode.



All electrical devices are available (e.g. climate

controls, heated seats, etc).

CAUTION!

The Sentry Key Immobilizer system is not

compatible with some aftermarket Remote Start

systems. Use of these systems may result in

vehicle starting problems and loss of security

protection.

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

18

GETTING TO KNOW YOUR VEHICLE

(Continued)

NOTE:

The vehicle will not start if the key fob is located

inside the cargo area and the liftgate is opened.

Backup Starting Method

NOTE:

If the ignition switch does not change with the push

of a button, the key fob may have a low or depleted

battery. In this situation, a back up method can be

used to operate the ignition switch. Put the nose

side (side opposite of the emergency key) of the

key fob against the START/STOP ignition button

and push to operate the ignition switch.

NOTE:

For more information on proper engine starting

procedures, see

REMOTE START — IF EQUIPPED

This system uses the key fob to start the

engine conveniently from outside the

vehicle while still maintaining security.

The system has a range of approximately

328 ft (100 m).
Remote Start is used to defrost windows in cold

weather, and to reach a comfortable climate in all

ambient conditions before the driver enters the

vehicle.
NOTE:

Obstructions between the vehicle and key fob may

reduce this range.

WARNING!



When leaving the vehicle, always remove the

key fob from the vehicle and lock your vehicle.



Never leave children alone in a vehicle, or with

access to an unlocked vehicle.



Allowing children to be in a vehicle unattended

is dangerous for a number of reasons. A child

or others could be seriously or fatally injured.

Children should be warned not to touch the

parking brake, brake pedal or the gear

selector.



Do not leave the key fob in or near the vehicle,

or in a location accessible to children, and do

not leave the ignition in the ON or RUN posi

-

tion. A child could operate power windows,

other controls, or move the vehicle.



Do not leave children or animals inside parked

vehicles in hot weather. Interior heat buildup

may cause serious injury or death.

CAUTION!

An unlocked vehicle is an invitation for thieves.

Always remove key fob from the vehicle and lock

all doors when leaving the vehicle unattended.

WARNING!

WARNING!



Do not start or run an engine in a closed

garage or confined area. Exhaust gas contains

Carbon Monoxide (CO) which is odorless and

colorless. Carbon Monoxide is poisonous and

can cause serious injury or death when

inhaled.



Keep key fobs away from children. Operation

of the Remote Start system, windows, door

locks or other controls could cause serious

injury or death.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR VEHICLE

19

H

OW

T

O

U

SE

R

EMOTE

S

TART

Push and release the Remote Start button on the

key fob twice within five seconds. The vehicle

doors will lock, the parking lights will flash, and the

horn will chirp twice (if programmed). Then the

engine will start and the vehicle will remain in the

Remote Start mode for a 15 minute cycle. Pushing

the Remote Start button a third time shuts the

engine off.



With Remote Start, the engine will only run for

15 minutes.



If an engine fault is present or fuel level is low,

the vehicle will start and then shut down in 10

seconds.



The parking lights will turn on and remain on

during Remote Start mode.



For security, power window and power sunroof

operation (if equipped) are disabled when the

vehicle is in the Remote Start mode.



The ignition must be placed in the ON/RUN posi

-

tion before the Remote Start sequence can be

repeated for a third cycle.

All of the following conditions must be met before

the engine will remote start:



Gear Selector in PARK



Doors closed



Hood closed



Liftgate closed



Hazard switch off



Brake switch inactive (brake pedal not pressed)



Battery at an acceptable charge level



PANIC button not pushed



System not disabled from previous Remote

Start event



Vehicle Security Light flashing



Ignition in OFF position



Fuel level meets minimum requirement



Vehicle Security system is not signaling an intru

-

sion



Malfunction Indicator Light (MIL) is not illumi

-

nated

T

O

E

XIT

R

EMOTE

S

TART

M

ODE

To drive the vehicle after starting the Remote Start

system, push and release the START/STOP ignition

button while pressing the brake pedal prior to the

end of the 15 minute cycle.
The Remote Start system will turn the engine off

with another push and release of the Remote Start

button on the key fob, or if the engine is allowed to

run for the entire 15 minute cycle. Once the

ignition is placed in the ON/RUN position, the

climate controls will resume the previously set

operations (temperature, blower control, etc.).
NOTE:



For vehicles equipped with the Keyless

Enter ‘n Go™ — Passive Entry feature, the

WARNING!



Do not start or run an engine in a closed

garage or confined area. Exhaust gas contains

Carbon Monoxide (CO) which is odorless and

colorless. Carbon Monoxide is poisonous and

can cause serious injury or death when

inhaled.



Keep key fobs away from children. Operation

of the Remote Start system, windows, door

locks or other controls could cause serious

injury or death.

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

20

GETTING TO KNOW YOUR VEHICLE

message “Remote Start Active — Push Start

Button” will display in the instrument cluster

display until you push the START/STOP ignition

button.



To avoid unintentional shutdowns, the system

will disable for two seconds after receiving a

valid Remote Start request.

R

EMOTE

S

TART

F

RONT

D

EFROST

A

CTIVATION

— I

F

E

QUIPPED

When Remote Start is active, and the outside

ambient temperature is 40°F (4.5°C) or below, the

system will automatically activate front defrost for

15 minutes or less. The timing is dependent on the

ambient temperature. Once the timer expires, the

system will automatically adjust the settings

depending on ambient conditions. See “Remote

Start Comfort Systems — If Equipped” in the next

section for detailed operation.

R

EMOTE

S

TART

C

OMFORT

S

YSTEMS

—

I

F

E

QUIPPED

When Remote Start is activated, the front and rear

defrost will automatically turn on in cold weather.

The heated steering wheel and driver heated seat

feature will turn on if selected in the comfort menu

screen within Uconnect Settings

vehicle will adjust the climate control settings

depending on the outside ambient temperature.

Automatic Temperature Control (ATC) —

If Equipped
The climate controls will be automatically adjusted

to the optimal temperature and mode settings

depending on the outside ambient temperature.

This will occur until the ignition is placed in the ON/

RUN position where the climate controls will

resume their previous settings.
Manual Temperature Control (MTC) — If Equipped



In ambient temperatures at 40°F (4.5°C) or

below, the climate settings will default to

maximum heat, with fresh air entering the

cabin. If the front defrost timer expires, the

vehicle will enter Mix Mode.



In ambient temperatures from 40°F (4.5°C) to

78°F (26°C), the climate settings will be based

on the last settings selected by the driver.



In ambient temperatures at 78°F (26°C) or

above, the climate settings will default to MAX

A/C, Bi-Level Mode, with Recirculation on.

For more information on ATC, MTC, and climate

control settings, see

NOTE:

These features will stay on through the duration of

Remote Start until the ignition is placed in the ON/

RUN position. The climate control settings will

change if manually adjusted by the driver while the

vehicle is in Remote Start mode, and exit auto

-

matic override. This includes the OFF button on the

climate controls, which will turn the system off.

R

EMOTE

S

TART

W

INDSHIELD

W

IPER

D

E

–I

CER

A

ND

R

EAR

D

EFROST

A

CTIVATION

— I

F

E

QUIPPED

When Remote Start is active and the outside

ambient temperature is less than 40°F (4.4°C),

the Windshield Wiper De-Icer will activate. Exiting

Remote Start will resume its previous operation. If

the Windshield Wiper De-Icer was active, the timer

and operation will continue.

R

EMOTE

S

TART

C

ANCEL

M

ESSAGE

—

I

F

E

QUIPPED

The following messages will display in the

instrument cluster if the vehicle fails to remote

start or exits Remote Start prematurely:



Remote Start Cancelled — Door Open



Remote Start Cancelled — Hood Open



Remote Start Cancelled — Fuel Low



Remote Start Cancelled — Liftgate Open



Remote Start Cancelled — Too Cold



Remote Start Cancelled — Time Expired



Remote Start Disabled — Start Vehicle To Reset

The message will stay active until the ignition is

placed in the ON/RUN position.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

GETTING TO KNOW YOUR VEHICLE

21

VEHICLE SECURITY SYSTEM — IF EQUIPPED

The Vehicle Security system monitors the vehicle

doors, hood, liftgate, and the Keyless Enter ‘n Go™

Ignition for unauthorized operation. While the

Vehicle Security system is armed, interior switches

for door locks and liftgate release are disabled. If

something triggers the alarm, the Vehicle Security

system will provide the following audible and

visible signals:



The horn will pulse



The turn signals will flash



The Vehicle Security Light in the instrument

cluster will flash

T

O

A

RM

T

HE

S

YSTEM

Follow these steps to arm the Vehicle Security

system:
1. Make sure the vehicle’s ignition is placed in

the OFF position.

2. Perform one of the following methods to lock

the vehicle:



Push the lock button on the interior power

door lock switch with the driver and/or

passenger door open.



Push the lock button on the exterior Passive

Entry door handle with a valid key fob avail

-

able in the same exterior zone



Push the lock button on the key fob.

3. If any doors are open, close them.

T

O

D

ISARM

T

HE

S

YSTEM

The Vehicle Security system can be disarmed using

any of the following methods:



Push the unlock button on the key fob.



Grab the Passive Entry door handle to unlock

the door



Cycle the ignition out of the OFF position to

disarm the system.

NOTE:



The driver's door key cylinder cannot arm or

disarm the Vehicle Security system.



The Vehicle Security system remains armed

during liftgate entry. If someone enters the

vehicle through the liftgate and opens any door,

the alarm will sound.



When the Vehicle Security system is armed, the

interior power door lock switches will not unlock

the doors.

The Vehicle Security system is designed to protect

your vehicle. However, you can create conditions

where the system will give you a false alarm. If one

of the previously described arming sequences has

occurred, the Vehicle Security system will arm,

regardless of whether you are in the vehicle or not.

If you remain in the vehicle and open a door, the

alarm will sound. If this occurs, disarm the Vehicle

Security system.
If the Vehicle Security system is armed and the

battery becomes disconnected, the Vehicle

Security system will remain armed when the

battery is reconnected; the exterior lights will flash,

and the horn will sound. If this occurs, disarm the

Vehicle Security system.

D

ISABLING

To completely disable the alarm (e.g. in the case of

long inactivity of the car), lock the doors by turning

the emergency key in the exterior door lock

cylinder.
NOTE:

If the batteries in the key fob discharge in the event

of a failure to the system or to switch off the alarm,

place the ignition in the ON/RUN position.

2

-------------------------------------------------------------------------------------------------------------------------------------------------------------

22

GETTING TO KNOW YOUR VEHICLE

DOORS

M

ANUAL

D

OOR

L

OCKS

To lock each door from the inside, rotate the door

lock button on each door trim panel forward. To

unlock the doors from the inside, pull the inside

door handle to the first detent or rotate the door

lock button until the lock symbol is no longer

visible.
If the lock symbol is visible when the door is shut,

the door will lock. Therefore, make sure the key fob

is not inside the vehicle before closing the door.

Manual Lock/Unlock Switch

NOTE:

The manual lock knob unlocks each individual

door separately.

P

OWER

D

OOR

L

OCKS

The power door lock switches are located on each

front door panel. Push the switch to lock or unlock

the doors and liftgate.
Push the lock button on the driver or passenger

door trim panel to lock the doors.
With the doors locked, push the unlock button to

unlock the doors.

Power Lock/Unlock Switch

The doors can also be locked and unlocked with

the Keyless Enter ‘n Go™ — Passive Entry system (if

equipped).

1 — Door Unlocked
2 — Door Locked

WARNING!



When exiting the vehicle, always remove the

key fob from the vehicle and lock your vehicle.



Never leave children alone in a vehicle, or with

access to an unlocked vehicle.



Allowing children to be in a vehicle unattended

is dangerous for a number of reasons. A child or

others could be seriously or fatally injured. Chil

-

dren should be warned not to touch the parking

brake, brake pedal or the gear selector.



Do not leave the key fob in or near the vehicle,

or in a location accessible to children, and do

not leave the Keyless Enter ‘n Go™ Ignition in

the ON/RUN position. A child could operate

power windows, other controls, or move the

vehicle.



Do not leave children or animals inside parked

vehicles in hot weather. Interior heat buildup

may cause serious injury or death.

CAUTION!

An unlocked car is an invitation. Always remove

the key from the ignition and lock all doors when

leaving the vehicle unattended.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Content .. 1 2 ..

///////////////////////////////////////