Content      ..     2      3      4      5     ..

Fiat 124 Spider (2020 year). Manual in english - page 4

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Light switch positions:

Illuminated Entry System

Battery Saver

† On: Light is on at all times.

The overhead light turns on when any of the

If any door is left open with the overhead

following operations occurs with the over-

light switch in the door position or the trunk

† Door: Light is on when any door is open.

head light switch in the door position and the

lid is left open, the overhead light or trunk

Light is on or off when the illuminated

ignition is OFF:

light turns off after about

30 minutes to

entry system is on.

prevent discharge of the battery.

† Turns on for about 30 seconds when the

† Off: Light is off at all times.

driver's door is unlocked

To prevent discharge of the battery, if the

Trunk Light

interior lights remain on (the interior light

† Turns on for about 15 seconds when a

switch is in the on position), they will turn off

The trunk light comes on when the lid is

door is opened while a key fob is left in the

automatically under the following condi-

open and turns off when closed.

vehicle and then the door is closed

tions:

† Turns on for about five seconds when a

† No operations are done for about

door is opened from the outside with a key

30 minutes after the ignition is placed in

fob being carried and then the door is

the OFF position.

closed

†

The

(lock) button on the key fob is

The overhead light turns on for about

pushed, or the request switch located on

15 seconds when the ignition is placed

the exterior door handle is pushed to lock

in the OFF position with the overhead

the doors

(vehicles with the advanced

light switch in the door position.

keyless function) after the ignition is

The overhead light turns off immediately in

placed in the OFF position.

Trunk Light Switch

the following cases:

NOTE:

† The ignition is placed in the ON position,

To prevent the battery from

being

and both doors are closed.

discharged, do not leave the trunk open for a

† The driver's door is locked.

long period when the engine is not running.

74

-------------------------------------------------------------------------------------------------------------------------------------------------------------

In addition, if the following operations are

Only use genuine FCA accessories or the

† Depending on the device connected to the

performed after turning the interior lights off,

equivalent requiring no greater than

12V

accessory socket, the vehicle's electrical

they will turn on again if:

(120 W, 10A).

system may be affected, which could

cause the warning light to illuminate.

† The ignition is placed in a position other

The ignition must be in the ACC or ON posi-

Disconnect the connected device and

than OFF.

tion.

make sure that the problem is resolved. If

† A door is opened.

the problem is resolved, disconnect the

To prevent accessory socket damage or elec-

trical failure, pay attention to the following:

device from the socket and place the igni-

† A door is unlocked.

tion in the OFF position. If the problem is

† Do not use accessories that require more

The operation of the illuminated entry

not resolved, contact an authorized dealer.

than 12V (120 W, 10A).

system can be changed through the Connect

NOTE:

system.

† Do not use accessories that are not

To prevent discharging of the battery, do not

genuine FCA accessories or the equiva-

Accessory Socket

use the socket for long periods with the

lent.

engine off or idling.

The accessory socket is located deep in the

† Close the cover when the accessory socket

back of the footwell on the passenger side.

is not in use to prevent foreign objects and

WARNING!

liquids from getting into the accessory

To avoid serious injury or death:

socket.

† Only devices designed for use in this

† Correctly insert the plug into the accessory

type of outlet should be inserted into any

socket.

12 Volt outlet.

† Do not insert the cigarette lighter into the

† Do not touch with wet hands.

accessory socket.

† Close the lid when not in use and while

† Noise may occur on the audio playback

driving the vehicle.

depending on the device connected to the

† If this outlet is mishandled, it may cause

accessory socket.

Accessory Socket

an electric shock and failure.

75

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Cupholders — If Equipped

Installing Cupholders

CAUTION!

Cupholders are available and can be inserted

When installing a cupholder, insert it firmly

† Do not place plastic bottles without caps

in the center console on the passenger side

into the installation hole and make sure that

in the cup holders. Otherwise, the

and the rear area of the center console.

it is secured in place.

contents may spill while the vehicle is

being driven.

† Do not place excessive weight on the cup

holders such as by resting your hands or

elbows on them. Otherwise, the cup

holders could be damaged.

† If a passenger is present, install the front

cup holder to the rear console. Other-

wise, a knee might hit it and cause the

contents to spill.

Installing Cupholders

Cupholders

1 — Front Cupholder

Removing Cup Holders

1 — Rear Cup Holder (If Equipped)

2 — Rear Cupholder

Use both hands when removing the cup

2 — Front Cup Holder

The front cupholder can be removed and

holder.

installed to the rear console.

WARNING!

Never use a cup holder to hold hot liquids

while the vehicle is moving. Using a cup

holder to hold hot liquids while the vehicle

is moving is dangerous. If the contents

spill, you could be burned.

Removing Cupholders

Correct Cupholder Placement

76

-------------------------------------------------------------------------------------------------------------------------------------------------------------

The rear cupholder is designed for use on the

ELECTRIC POWER

ENVIRONMENT

rear console and cannot be installed to the

STEERING

PROTECTION SYSTEMS

front side.

Power Steering

Emission Control System

Electric power steering is only operable when

This vehicle is equipped with an emission

the engine is running.

control system (the catalytic converter is part

of this system) that enables the vehicle to

If the engine is off, or if the power steering

comply with existing exhaust emissions

system is inoperable, steering the vehicle

requirements.

will require more physical effort.

Ignoring the following precautions could

If the steering feels stiffer than usual during

cause lead to accumulate on the catalyst

normal driving, or the steering vibrates,

Incorrect Cupholder Placement

inside the converter or cause the converter to

contact an authorized dealer.

get very hot. Either condition will damage the

Windblocker

converter and cause poor performance:

The

warning light illuminated in the

instrument cluster display notifies the driver

† USE ONLY UNLEADED FUEL.

The Windblocker reduces rear wind coming

into the cabin while driving with the convert-

of system abnormalities and operation condi-

† Do not drive the vehicle with any sign of

ible top in the lowered position.

tions.

engine malfunction.

NOTE:

† Do not coast with the ignition OFF.

Never hold the steering wheel to the extreme

left or right for more than five seconds with

† Do not descend steep grades in gear with

the engine running. This could damage the

the ignition OFF.

power steering system.

† Do not operate the engine at high idle for

more than two minutes.

Windblocker

77

-------------------------------------------------------------------------------------------------------------------------------------------------------------

† Do not tamper with the emission control

While the engine is off, the sound of a valve

WARNING!

system. All inspections and adjustments

opening and closing can be heard at the rear

must be made by an authorized dealer.

of the vehicle, however this does not indicate

A hot exhaust system can start a fire if you

an abnormality. The vehicle has a

park over materials that can burn. Such

† Do not push-start or pull-start your

self-checking device and it operates while

materials might be grass or leaves coming

vehicle.

the engine is off.

into contact with your exhaust system. Do

Under U.S. federal law, any modification to

not park or operate your vehicle in areas

the original-equipment emission control

where your exhaust system can contact

system before the first sale and registration

anything that can burn.

of a vehicle is subject to penalties. In some

states, such modification made on a used

vehicle is also subject to penalties.

78

-------------------------------------------------------------------------------------------------------------------------------------------------------------

CONTROL PANEL AND INSTRUMENTS

Instrument Cluster

Abarth Instrument Cluster

1 — Odometer/Trip Computer And Trip Computer Button/Dashboard

4 — Automatic Transmission Info Display

Illumination

5 — Odometer/Trip Computer Info/Engine Coolant Temperature

2 — Tachometer

Gauge/Fuel Gauge/Outside Temperature/Cruise Control/Info Switch

3 — Speedometer

Display

79

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster

Instrument Cluster

1 — Odometer/Trip Computer And Trip Computer Button/Dashboard

4 — Automatic Transmission Info Display

Illumination

5 — Odometer/Trip Computer Info/Engine Coolant Temperature

2 — Tachometer

Gauge/Fuel Gauge/Outside Temperature/Cruise Control/Info Switch

3 — Speedometer

Display

80

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Odometer/Trip Computer

When “Trip A” is selected, pushing the

selector again within one second will change

The display mode can be changed from

to “Trip B” mode. When “Trip A” is selected,

odometer to

“Trip computer A” to

“Trip

TRIP A will be displayed. When “Trip B” is

computer B” and then back to odometer by

selected, TRIP B will be displayed.

pushing the selector.

The trip computer records the total distance

The selected mode will be displayed.

the vehicle is driven until the meter is reset.

Return it to “0.0” by depressing and holding

the selector for one second or more.

Odometer/Trip Reset Button

Use this meter to measure trip distances and

1 — Odometer/Trip Reset Button

to compute fuel consumption.

NOTE:

Odometer

Only the trip records tenths of miles (kilome-

ters).

The odometer records the total distance the

vehicle has been driven.

Trip Computer Reset

Abarth Odometer/Trip Reset Button

Trip Computer

The trip computer will be erased when:

1 — Odometer/Trip Reset Button

† The power supply is interrupted (blown

The trip computer can record the total

fuse or the battery is disconnected).

distance of two trips. One is recorded in

“Trip A”, and the other is recorded in “Trip

† The vehicle is driven over 9999.9 miles.

B”.

Speedometer

For instance,

“Trip A” can record the

distance from the point of origin, and “Trip

The speedometer indicates the speed of the

B” can record the distance from where the

vehicle.

fuel tank is filled.

81

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Panel Illumination

Canceling Illumination Dimmer

When the position lights are turned on with

With the ignition ON, rotate the knob to the

the ignition switched ON, the brightness of

right until a beep sounds while the instru-

the instrument panel illumination is

ment cluster is dimmed. If the instrument

dimmed. When the position lights are turned

cluster's visibility is reduced due to glare

on, the

warning light in the instrument

from surrounding brightness, cancel the illu-

cluster illuminates. See “Exterior Lights” in

mination dimmer.

“Getting To Know Your Vehicle” chapter.

When the illumination dimmer is canceled,

Brightness Adjustment

the instrument cluster cannot be dimmed

Abarth Dimmer Knob

even if the position lights are turned on.

The brightness of the instrument panel and

1 — Instrument Cluster Illumination Dim-

When the illumination dimmer is canceled,

dashboard illuminations can be adjusted by

mer Knob

the screen in the center display switches to

rotating the knob:

constant display of the daytime screen.

† The brightness decreases by rotating the

Trip Computer And Info Switch

knob to the left. A beep will be heard when

the knob has been rotated to the

The following information can be selected by

maximum dim position.

pushing the INFO switch with the ignition in

† The brightness increases by rotating the

the ON position:

knob to the right.

† Distance-to-empty (approximate distance

you can travel on the available fuel)

† Average fuel economy

† Current fuel economy

Dimmer Knob

1 — Instrument Cluster Illumination Dim-

mer Knob

82

-------------------------------------------------------------------------------------------------------------------------------------------------------------

† Average vehicle speed

† If there is no past fuel economy informa-

tion such as after first purchasing your

† Vehicle speed alarm — If Equipped

vehicle or the information is deleted when

If you have any problems with your trip

the battery cables are disconnected, the

computer, contact an authorized dealer.

actual distance-to empty/range may differ

from the amount indicated.

Average Fuel Economy Mode

This mode displays the average fuel economy

by calculating the total fuel consumption

Distance To Empty Display Screen

and the total traveled distance since

NOTE:

purchasing the vehicle, reconnecting the

battery after disconnection, or resetting the

† Even though the distance-to-empty

data.

display may indicate a sufficient amount

of remaining driving distance before refu-

The average fuel economy is calculated and

Instrument Cluster Display Controls

eling is required, refuel as soon as

displayed every minute. To clear the data

possible if the fuel level is very low or the

being displayed, push the INFO switch for

Distance-To-Empty Mode

low fuel warning light illuminates.

more than 1.5 seconds.

This mode displays the approximate distance

† The display may not change unless you

After pushing the INFO switch, “- - - mpg”

you can travel on the remaining fuel based

add more than approximately 2.3 gallons

(“- - - L/100 km”) will be displayed for about

on the fuel economy.

(9 liters) of fuel.

one minute before the fuel economy is recal-

The distance-to-empty will be calculated and

culated and displayed.

† The distance-to-empty is the approximate

displayed every second.

remaining distance the vehicle can be

driven until all the graduation marks in the

fuel gauge (indicating the remaining fuel

supply) disappear.

83

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Current Fuel Economy Mode

Average vehicle speed will be calculated and

The set vehicle speed will flash several

displayed every

10 seconds. To clear the

times. The vehicle speed alarm can be set

This mode displays the current fuel economy

data being displayed, push the INFO switch

using the INFO switch. The vehicle speed

by calculating the amount of fuel consump-

for more than 1.5 seconds.

alarm function can be set between 18 and

tion and the distance traveled. Current fuel

155 mph (30 and 250 km/h).

economy will be calculated and displayed

every two seconds.

NOTE:

Always set the vehicle speed according to the

When you've slowed to about 3 mph (5 km/h)

laws and regulations of the country/city in

,

“-

-

- mpg” (“-

-

- L/100 km”) will be

which the vehicle is driven. In addition,

displayed.

always verify the speed of the vehicle using

the speedometer.

The vehicle speed alarm can be set using the

following procedure:

Average Vehicle Speed Display Screen

1.

Press the INFO switch to display the

Vehicle Speed Alarm mode.

After pushing the INFO switch, “- - - MPH”

(“- - - km/h”) will be displayed for about one

2.

Press the INFO switch continuously until

minute before the vehicle speed is recalcu-

a beep sound is heard. The set vehicle

lated and displayed.

speed display flashes the first digit.

Current Fuel Economy Display Screen

Vehicle Speed Alarm Mode — If Equipped

3.

Press the INFO switch and set the first

Average Vehicle Speed Mode

In this mode, the current setting for the

digit to the desired vehicle speed. The

Vehicle Speed Alarm is displayed. You can

numerical value changes each time the

This mode displays the average vehicle

change the set vehicle speed that will trigger

INFO switch is pressed.

speed by calculating the distance and the

the warning.

time traveled since connecting the battery or

4.

Press the INFO switch continuously until

resetting the data.

NOTE:

a beep sound is heard. The set vehicle

The vehicle speed alarm display is activated

speed display flashes the lower two

at the same time the beep sound is heard.

digits.

84

-------------------------------------------------------------------------------------------------------------------------------------------------------------

5. Press the INFO switch and set the two

NOTE:

lower digits to the desired vehicle speed.

If the high engine coolant temperature

The numerical value changes each time

warning light (red) turns on, there is a possi-

the INFO switch is pressed.

bility of overheating. Park the vehicle in a

safe place immediately and take appropriate

6. Press the INFO switch continuously until

measures. If the vehicle continues to be

a beep sound is heard. The set vehicle

driven, it could cause damage to the engine.

speed is displayed on the vehicle speed

alarm screen.

Fuel Gauge

Tachometer

The fuel gauge shows approximately how

Tachometer

much fuel is remaining in the tank when the

1 — Tachometer Display

The tachometer shows engine speed in thou-

ignition is in the ON position. We recom-

sands of revolutions per minute (rpm).

mend keeping the tank over a quarter full.

Engine Coolant Temperature Gauge And

† E = Empty

The range varies depending on the type of

Fuel Gauge

gauge.

† F = Full

Engine Coolant Temperature Gauge

If the low fuel warning light illuminates or

the fuel level is very low, refuel as soon as

possible.

NOTE:

† After refueling, it may require some time

for the indicator to stabilize. In addition,

the indicator may deviate while driving on

a slope or curve since the fuel moves in

the tank.

Abarth Tachometer

Fuel/Temperature Gauge

1 — Tachometer Display

1 — Engine Coolant Temperature

2 — Fuel Gauge

85

-------------------------------------------------------------------------------------------------------------------------------------------------------------

† The display indicating a quarter or less

† The vehicle is parked.

3. Push and hold the INFO switch for three

remaining fuel has more segments to show

seconds or longer while the outside

† The vehicle is driven at low speeds.

the remaining fuel level in greater detail.

temperature display is flashing. The

Changing The Temperature Unit Of The Outside

outside temperature display illuminates.

† The direction of the arrow on the fuel

Temperature Display

gauge indicates that the fuel door lid is on

NOTE:

the left side of the vehicle.

The outside temperature unit can be

When the temperature unit indicated in the

switched between Fahrenheit and Celsius

outside temperature display is changed, the

Outside Temperature Display

using the following procedure.

temperature unit indicated in the engine

When the ignition is in the ON position, the

coolant gauge display changes in conjunc-

Vehicles With Fiat Connect 7.0

outside temperature is displayed.

tion with it.

Settings can be changed through the

Cruise Control Set Vehicle Speed Display

Connect 7.0 radio screen. Refer to “Person-

alization Features” in this chapter.

The vehicle speed preset using the cruise

control is displayed.

Vehicles With Fiat Radio 3.0

Proceed as follows:

1. Push the INFO switch with the ignition in

the OFF position and continue pushing

the INFO switch for five seconds or

longer while placing the ignition in the

Outside Temperature Screen Display

ON position. The outside temperature

display flashes.

Under the following conditions, the outside

temperature display may differ from the

2. Push the INFO switch to change the

actual outside temperature depending on the

outside temperature unit.

Cruise Control Display Screen

surroundings and vehicle conditions:

† Significantly cold or hot temperatures.

† Sudden changes in outside temperature.

86

-------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Unless reset, this message will continue to

3. Place the ignition in the OFF/LOCK posi-

Oil Life Reset

display each time you turn the ignition

tion.

Vehicles With FIAT Connect 7.0 Radio

switch to the ON/RUN position. To reset the

NOTE:

oil change indicator system (after performing

Proceed as follows:

the scheduled maintenance), refer to the

If the indicator message illuminates when

you start the vehicle, the oil change indicator

following procedure

1. Select the icon

on the home screen to

system did not reset. If necessary, repeat

display the “Applications” screen.

1. Place the ignition in the ON position. (Do

this procedure.

not start the engine.)

2. Select

“Maintenance” to display the

maintenance list screen.

2. Fully push the accelerator pedal slowly to

the floor, three times within ten seconds.

3. Switch the tab and select the setting

item you want to change: “Scheduled,”

“Tire Rotation,” or “Oil Change.”

Oil Life Monitor

You can customize settings in the setup display as follows:

Tab

Item

Explanation

Scheduled

Setting

Notification can be turned on/off.

Time (months)

Displays the time or distance until maintenance is due. Select this item to set the

Distance (mile or km)

maintenance period. “Scheduled Due!” is displayed in red, and the indicator light

will illuminate in the instrument cluster when the remaining distance is less than

300 miles (500 km) or the remaining number of days is less than 15 (whichever

comes first).

Reset

Resets the time and distance to the initial values. Once the system turns on, it

needs to be reset whenever carrying out maintenance.

88

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Tab

Item

Explanation

Tire Rotation

Setting

Notification can be switched on/off.

Distance (mile or km)

Displays the distance until tire rotation is due. Select this item to set the tire

rotation distance.

“Tire Rotation Due!” is displayed in red and the wrench

indicator light will illuminate in the instrument cluster when the remaining

distance is less than 300 miles (500 km).

Reset

Resets the remaining distance to the initial value. Once the system turns on, it

needs to be reset whenever rotating the tires.

Oil Change

Setting

Notification can be switched on/off.

Distance (mile or km)

Displays the distance until an oil change is due. Select this item to set the oil

change distance. “Oil Change Due!” is displayed in red, and the indicator light

will illuminate in the instrument cluster when the remaining distance is less than

300 miles (500 km).

Reset

Resets the remaining distance to the initial value. Once the system turns on, it

needs to be reset whenever replacing the engine oil.

Oil life (%)

Displays the engine oil life until an oil change is due. “Oil Change Due!” is

displayed in red and the indicator light will illuminate in the instrument cluster

when remaining oil life distance is less than 300 miles (500 km), or remaining

days are less than 15 (whichever comes first).

Reset

Resets the remaining oil life to 100%. The system must be reset whenever

replacing the engine oil.

(*) The engine oil flexible maintenance setting is available (only some models). Consult an authorized dealer for details. When the engine oil

flexible maintenance setting is selected, you will see the following items in the display.

The vehicle calculates the remaining oil life based on the engine operating conditions and lets you know when an oil change is due by illu-

minating the indicator light in the instrument cluster.

89

-------------------------------------------------------------------------------------------------------------------------------------------------------------

FUEL ECONOMY MONITOR

Select the icon in the menu and perform the

Fuel Consumption Display

operation. Each icon operates as follows:

— IF EQUIPPED

Information regarding fuel economy is

1.

Hides the menu display.

displayed:

Description

2.

Displays the application screen.

1.

Displays the fuel economy for the past

The

“Fuel Consumption” information is

60 minutes:

3.

Resets the fuel economy data.

displayed by operating each icon in the

† Displays the fuel economy every

display.

4.

Displays the following setting screen:

minute for the past 1 to 10 minutes.

In addition, after completing a trip, the total

ending display on/off switching - On/off

† Displays the fuel economy every

energy efficiency to date is displayed in the

switching for function which synchro-

nizes reset fuel economy data to trip

10 minutes for the past

10 to

ending display when the ending display is

60 minutes.

turned on.

meter (Trip A).

2.

Displays the average fuel economy over

Proceed as follows:

the past five resets and after the current

1. Select the

icon on the home screen to

reset.

display the applications screen.

3.

Calculates the average fuel economy

2. Select the “Fuel Economy Monitor”.

every minute after vehicle travel begins,

and displays it.

3. Select the

icon on the home screen to

display the applications screen.

NOTE:

Fuel Economy Display Screen

When the menu is displayed by touching the

screen, the display is hidden automatically

after six seconds.

Average Fuel Economy Display Screen

90

-------------------------------------------------------------------------------------------------------------------------------------------------------------

NOTE:

WARNING LIGHTS AND

Vehicles With Fiat Connect 7.0

The fuel economy data is synchronized

MESSAGES

The warning contents can be verified on the

(linked) with the average fuel economy

audio system.

displayed in the trip computer.

Warning Lights And Messages

Proceed as follows:

† To reset the fuel economy data, press the

NOTE:

icon in the menu. (The average fuel

1. If the warning light is turned on, select

economy displayed in the trip computer

† The warning light in the instrument panel

icon on the home screen to display

resets at the same time).

appears together with a dedicated

the application screen.

message and/or acoustic signal when

† When the function, which synchronizes

2. Select “Vehicle Status Monitor”

applicable. These indications are indica-

the fuel economy monitor and the trip

tive and precautionary and as such must

meter, is on, reset Trip A of the trip meter.

3. Select “Warning Guidance” to display the

not be considered as exhaustive and/or

current warnings.

† Delete the average fuel economy informa-

alternative to the information contained in

tion displayed in the trip computer.

the Owner’s Manual, which you are

4. Select the applicable warning to view the

advised to read carefully in all cases.

warning details.

After resetting the fuel economy data, “-- -”

Always refer to the information in this

is displayed while the average fuel economy

chapter in the event of a failure indication.

For the following warning/indicator lights:

is calculated.

† Master Warning Light

† Failure indications displayed are divided

Ending Screen Display

into two categories: serious and less

† Brake System Warning Light

serious failures. Serious failures are indi-

If the ending display on the fuel economy

cated by a repeated and prolonged

† ABS Warning Light

monitor is on when the ignition is cycled

warning “cycle”. Less serious failures are

from ON position to the OFF position, the

† Charging System Warning Light

indicated by a warning

“cycle” with a

information regarding the fuel economy is

shorter duration. The display cycle of both

† Engine Oil Warning Light

displayed.

categories can be interrupted. The instru-

† Electric Throttle Warning Light

ment panel warning light will stay on until

the cause of the failure is eliminated.

† Cold Start Warning Light

91

-------------------------------------------------------------------------------------------------------------------------------------------------------------

† Check Engine Warning Light

† Tire Pressure Monitoring System Warning

The light turns on when the ignition is

Light

switched on for an operation check, and

† Coolant Temperature Warning Light

turns off a few seconds later or when the

† KEY Warning Light

† Automatic Transmission Warning Light

engine is started. If the light does not turn on

† LED Headlight KEY Warning Light

or remains turned on, have the vehicle

† Power Steering Malfunction Indicator

inspected at an authorized dealer.

Light

† BSM (Blind Spot Monitoring) OFF Indi-

cator Light

NOTE:

† Air Bag/Seat Belt Pretensioner System

Only for “Brake System Warning Light:” the

Warning Light

† Traction Control System

(TCS)/Dynamic

light turns on continuously when the parking

Stability Control (DSC) Indicator Light

brake is applied.

† Check Fuel Cap Warning Light

† DSC OFF Indicator Light

† Low Fuel Warning Light

† Security Indicator Light

† Seat Belt Warning Light

† Indicator Light

† Door Ajar Warning Light

† Passenger Air Bag Deactivation Warning

† Low Washer Fluid Level Warning Light

Light

92

-------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Content      ..     2      3      4      5     ..