Lincoln Navigator (2022 year). Manual in english - page 5

OPENING THE DOORS FROM INSIDE
YOUR VEHICLE

Pull the interior door handle twice to unlock
and open a rear door.  The first pull unlocks
the door and the second pull opens the door.

AUTOUNLOCK

WHAT IS AUTOUNLOCK

Autounlock is an unlocking feature that
unlocks the vehicle doors when your vehicle
comes to a stop.

AUTOUNLOCK REQUIREMENTS

Autounlock unlocks all the doors when all of
the following occur:
•

The ignition is on, all the doors are closed
and your vehicle is moving at a speed
greater than 12 mph (20 km/h).

•

Your vehicle comes to a stop.

•

You open the driver door within 10
minutes of switching the ignition off or to
the accessory position.

SWITCHING AUTOUNLOCK ON AND
OFF

1. Press Settings on the touchscreen.
2. Press Vehicle Settings.

3. Switch Autounlock on or off.

AUTOLOCK

WHAT IS AUTOLOCK

Autolock is a locking feature that locks your
vehicle doors when you start driving.

AUTOLOCK REQUIREMENTS

Autolock locks all the doors when all of the
following occur:
•

All doors are closed.

•

The ignition is on.

•

Your vehicle reaches a speed greater
than 12 mph (20 km/h).

MISLOCK

WHAT IS MISLOCK

Mislock is a locking feature that warns you
if your vehicle has not locked.

MISLOCK LIMITATIONS

When you press the lock button once, the
turn signals do not flash if:
•

Any door or the tailgate is open.

•

The hood is open.

If you switch mislock off, the horn does not
sound if you press the lock button on the
remote control when a door is open.

SWITCHING MISLOCK ON AND OFF

1. Press Settings on the touchscreen.
2. Press Vehicle Settings.

3. Switch Mislock Chirp on or off.

88

Doors and Locks

DOORS AND LOCKS AUDIBLE
WARNINGS

Door Ajar Audible Warning

Sounds when a door is not fully closed and
your vehicle is moving.

DOORS AND LOCKS –
TROUBLESHOOTING

DOORS AND LOCKS – WARNING
LAMPS

Door Ajar Warning Lamp

E249859

It illuminates when you switch the
ignition on and remains on if any
door or the hood is open.

DOORS AND LOCKS – INFORMATION MESSAGES

Action

Message

Displays if a door is open. Fully close the door.

Driver Door Ajar

Passenger Door Ajar

Rear Left Door Ajar

Rear Right Door Ajar

89

Doors and Locks

DOORS AND LOCKS – FREQUENTLY
ASKED QUESTIONS

Can accessories such as steps or handles
be used with the latch assembly?

Do not use the door latch assembly to
attach any accessory, such as handles
or steps, as this can cause damage to
your vehicle.

90

Doors and Locks

KEYLESS ENTRY LIMITATIONS

Make sure your remote control is within 3 ft
(1 m) from the front door handles and the
tailgate.

The system could not function if:
•

The remote control remains stationary
for about a minute.

•

The vehicle battery has no charge.

•

The remote control battery has no
charge.

•

There is interference causing issues with
the remote control frequencies.

•

The remote control is too close to metal
objects or electronic devices, for example
keys or a cell phone.

KEYLESS ENTRY SETTINGS

Switching Keyless Entry On and Off

1. Switch the ignition on using an original

key that has not been created as a
MyKey.

2. Press Settings on the touchscreen.

3. Press Vehicle Settings.
4. Press Locks.

Reprogramming the Unlocking
Function

You can enable two-stage unlocking function
allowing you to unlock only the driver door
when you touch the unlock sensor.

Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking.

If you program the unlocking function so that
only the driver door unlocks, you can unlock
all of the other doors from inside your vehicle
using the power door lock control. You can
unlock individual doors by pulling the interior
door handles on those doors.

USING KEYLESS ENTRY

Unlocking the Doors

E248553

With the remote control within 3 ft (1 m) of
your vehicle, touch the unlock sensor on the
back of the door handle for a brief period
and then pull on the door handle to unlock,
being careful not to touch the lock sensor at
the same time or pull on the door handle too
quickly. The system requires a brief delay to
authenticate the remote control.

Locking the Doors

E248554

91

Keyless Entry

With your passive key within 3 ft (1 m) of your
vehicle, touch the outer door handle lock
sensor for approximately one second to lock,
being careful not to touch the unlock sensor
on the back of the door handle at the same
time. After locking, you can immediately pull
on the door handle to confirm locking
occurred without inadvertently unlocking.

Opening the Liftgate with the Remote
Control

E291416

Press the exterior liftgate release button
inside of the liftgate handle. The liftgate
unlocks and opens.  See Opening the
Liftgate From Outside Your Vehicle (page
98).

KEYLESS ENTRY –
TROUBLESHOOTING

KEYLESS ENTRY – FREQUENTLY
ASKED QUESTIONS

Why does the keypad not accept the access
code?

If you enter the access code too fast on
the keypad, the unlock function may not
work. Slowly re-enter the access code.

Why does the passive key not work?

The system deactivates passive keys
left inside your vehicle when you lock
it. You cannot switch the ignition on
using a deactivated passive key. Press
the unlock button on the remote control
to reactivate a passive key.

Why does the keypad not function?

The keypad goes into an anti-scan
mode if you enter a wrong code seven
times. The anti-scan mode disables the
keypad for one minute and the red light
flashes.

92

Keyless Entry

WHAT IS THE KEYLESS ENTRY
KEYPAD

The keyless entry keypad allows you to lock
and unlock your vehicle using the keypad
on the window trim.

KEYLESS ENTRY KEYPAD
LIMITATIONS

The system may not function if:
•

The vehicle battery has no charge.

LOCATING THE KEYLESS ENTRY
KEYPAD

The keypad is near the driver window and
illuminates when you touch it.

E138637

KEYLESS ENTRY KEYPAD MASTER
ACCESS CODE

Unlocking the Doors

E138637

Enter the factory-set five-digit code or your
personal code.  You must press each number
within five seconds of each other.

•

Press 3-4 within five seconds to unlock
all doors.

93

Keyless Entry Keypad

Locking the Doors

E138637

Press and hold 7·8 and 9·0 at the same time
with the driver door closed.

Note: You do not need to enter the code
first.

KEYLESS ENTRY KEYPAD
PERSONAL ACCESS CODES

Programming a Personal Entry Code

1. Enter the five-digit master code.

2. Press 1·2 on the keypad within five

seconds.

3. Enter your personal five-digit code.  You

must do this within five seconds of
completing Step 2.

4. Press 1·2 on the keypad to save personal

code 1.

The doors lock then unlock to confirm that
programming was successful.

To program additional personal entry codes,
repeat Steps 1 through 3, then for Step 4:
•

Press 3·4 to save personal code 2.

•

Press 5·6 to save personal code 3.

•

Press 7·8 to save personal code 4.

•

Press 9·0 to save personal code 5.

If your vehicle comes with SYNC, you can
also program the system with a personal
entry code.

Hints:
•

Do not set a code that uses five of the
same number.

•

Do not use five numbers in sequential
order.

•

The five-digit master code works even if
you have set your own personal code.

Erasing a Personal Code

1. Enter the five-digit master code.

2. Press and release 1·2 on the keypad

within five seconds.

3. Press and hold 1·2 for two seconds. You

must do this within five seconds of
completing Step 2.

All personal codes erase and only the
five-digit master code works.

Anti-Scan Feature

The keypad goes into an anti-scan mode if
you enter the wrong code seven times.  This
mode turns off the keypad for one minute
and the keypad lamp flashes.

94

Keyless Entry Keypad

The anti-scan feature turns off after:
•

One minute of keypad inactivity.

•

You press the unlock button on the
remote control.

•

You switch the ignition on.

•

You unlock your vehicle using keyless
entry.

USING THE KEYLESS ENTRY
KEYPAD

Unlocking the Doors

E138637

Enter the factory-set five-digit code or your
personal code.  You must press each number
within five seconds of each other.

•

Press 3-4 within five seconds to unlock
all doors.

Locking the Doors

E138637

Press and hold 7·8 and 9·0 at the same time
with the driver door closed.

Note: You do not need to enter the code
first.

95

Keyless Entry Keypad

KEYLESS ENTRY KEYPAD –
TROUBLESHOOTING

KEYLESS ENTRY KEYPAD –
FREQUENTLY ASKED QUESTIONS

Why does the keypad not accept the access
code?

If you enter the access code too fast on
the keypad, the unlock function may not
work. Slowly re-enter the access code.

Why does the keypad not function?

The keypad goes into an anti-scan
mode if you enter a wrong code seven
times. The anti-scan mode disables the
keypad for one minute and the red light
flashes.

96

Keyless Entry Keypad

HOW DOES EASY ENTRY AND
EXIT WORK

Easy entry and exit moves the driver seat
rearward up to 2 in (5 cm) and the steering
column up when you switch the ignition off.
The driver seat and steering column return
to their previous positions when you switch
the ignition on.

Note: Depending on your vehicle, the column
may move up and in.

SWITCHING EASY ENTRY AND
EXIT ON AND OFF

1. Press Settings on the touchscreen.
2. Press Vehicle.

3. Select Easy Entry/Exit.

If you press any adjustment or memory
button when in easy exit mode, the system
cancels the operation.

97

Easy Entry and Exit

LIFTGATE PRECAUTIONS

WARNING: It is extremely dangerous

to ride in a cargo area, inside or outside of
a vehicle. In a crash, people riding in these
areas are more likely to be seriously
injured or killed. Do not allow people to
ride in any area of your vehicle that is not
equipped with seats and seatbelts. Make
sure everyone in your vehicle is in a seat
and properly using a seatbelt. Failure to
follow this warning could result in serious
personal injury or death.

WARNING: Make sure that you fully

close the liftgate to prevent exhaust fumes
from entering your vehicle. If you are
unable to fully close the liftgate, open the
air vents or the windows to allow fresh air
to enter your vehicle. Failure to follow this
instruction could result in personal injury
or death.

WARNING: Keep keys out of reach

of children. Do not allow children to
operate or play near an open or moving
power liftgate. You should supervise the
operation of the power liftgate at all times.

OPENING THE LIFTGATE

OPENING THE LIFTGATE FROM INSIDE
YOUR VEHICLE

E138633

With the transmission in park (P),
press the button on the instrument
panel.

Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:  Do not hang anything, for example a
bike rack, from the glass or liftgate.  This
could damage the liftgate and its
components.

Note:  Do not leave the liftgate open while
driving.  This could damage the liftgate and
its components.

OPENING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE

E349965

Glass.

A

Door.

B

1. Unlock the liftgate with the remote

control or power door unlock control.  If
a remote control is within 3 ft (1 m) of the
liftgate, the liftgate unlocks when you
press the liftgate release button.

2. Press button B.

98

Liftgate

Note: Allow the power system to open the
liftgate. Manually pushing or pulling the
liftgate may activate the system’s obstacle
detection feature and stop the power
operation or reverse its direction, replicate
a strut failure, or damage mechanical
components.

Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:  Do not hang anything, for example a
bike rack, from the glass or liftgate.  This
could damage the liftgate and its
components.

Note:  Do not leave the liftgate open while
driving.  This could damage the liftgate and
its components.

Switching the Power Liftgate On or Off

You can switch the power liftgate on or off
through the vehicle settings on your
touchscreen.

Note: When switched off, the liftgate only
unlatches and will not power open or close.

OPENING THE LIFTGATE USING THE
REMOTE CONTROL

E267940

Press the button twice within three
seconds.

Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note: Do not hang anything, for example a
bike rack, from the glass or liftgate. This
could damage the liftgate and its
components.

Note: Do not leave the liftgate open while
driving. This could damage the liftgate and
its components.

OPENING THE HANDS-FREE LIFTGATE

(If Equipped)

Make sure you have the passive key within
3 ft (1 m) of the liftgate.

1. Stand behind your vehicle, and face the

liftgate.

2. Move your foot, in a single-kick motion,

without pausing, under and away from
the rear bumper detection area.

E300799

3. The liftgate opens.

Avoid the following actions when using the
hands-free opening feature:

•

Making physical contact with the bumper.

•

Holding your foot under the bumper.

•

Sweeping your foot from side to side, or
kicking at an odd angle.

99

Liftgate

Detection Zones

E253799

The detection area is on the left-hand side
and right-hand side of the rear bumper area.

Note: Some vehicles may have the ability to
detect the kicking motion from under the
trailer hitch.

Note: Allow the power system to open the
liftgate. Manually pushing or pulling the
liftgate may activate the system’s obstacle
detection feature and stop the power
operation or reverse its direction, replicate
a strut failure, or damage mechanical
components.

Note: Any physical actions that mimic a
kicking motion such as splashing water,
trailer chains or vacuum hoses may cause
the hands-free liftgate to activate. Switch the
power liftgate off through your vehicle
settings or keep the passive key away from
the rear bumper detection area.

SETTING THE LIFTGATE OPENING
HEIGHT

1. Open the liftgate.

2. Stop the liftgate movement by pressing

the control button on the liftgate when it
reaches the desired height.

Note: Once the liftgate stops moving, you
can manually move it to the desired height.

3. Press and hold the control button on the

liftgate until a tone sounds, indicating
programming is complete.

Note: You can only use the liftgate control
button to program the height.

Note: You cannot program the height if the
liftgate position is too low.

4. The power liftgate now opens at the

programmed height. To change the
programmed height, repeat the steps.

Note: You can fully open the liftgate by
manually pushing it upward to the maximum
open position if it opens in a lower position.

Note: The system recalls the new
programmed height until you reprogram it,
even if you disconnect the battery.

CLOSING THE LIFTGATE

CLOSING THE LIFTGATE FROM INSIDE
YOUR VEHICLE

WARNING: Make sure all persons

are clear of the power liftgate area before
using the power liftgate control.

E138633

With the transmission in park (P),
press the button on the instrument
panel.

100

Liftgate

Note:  Make sure that you close the liftgate
before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure.  This could damage the
liftgate and its components.

Note:  Make sure the area behind your
vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate.  Objects too close to your vehicle,
for example a wall, garage door or another
vehicle may come into contact with the
moving liftgate.  This could damage the
liftgate and its components.

Note: Make sure that you fully close the
liftgate to prevent cargo from falling out.

CLOSING THE LIFTGATE FROM
OUTSIDE YOUR VEHICLE

WARNING: Make sure all persons

are clear of the power liftgate area before
using the power liftgate control.

E252965

Press and release the liftgate button.

Note:  Make sure that you close the liftgate
before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure.  This could damage the
liftgate and its components.

Note:  Make sure the area behind your
vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate.  Objects too close to your vehicle,
for example a wall, garage door or another
vehicle may come into contact with the
moving liftgate  This could damage the
liftgate and its components.

Note: Make sure you fully close the liftgate
to prevent cargo from falling out.

CLOSING THE LIFTGATE USING THE
REMOTE CONTROL

WARNING: Make sure all persons

are clear of the power liftgate area before
using the power liftgate control.

E267940

Press the button twice within three
seconds.

Note:  Make sure that you close the liftgate
before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure.  This could damage the
liftgate and its components.

101

Liftgate

Note:  Make sure the area behind your
vehicle is free from obstruction and that
there is enough room for you to operate the
liftgate.  Objects too close to your vehicle,
for example a wall, garage door or another
vehicle may come into contact with the
moving liftgate.  This could damage the
liftgate and its components.

Note: Make sure that you fully close the
liftgate to prevent cargo from falling out.

CLOSING THE HANDS-FREE LIFTGATE

(If Equipped)

Make sure you have the remote control
within 3 ft (1 m) of the liftgate.

1. Stand behind your vehicle, and face the

liftgate.

2. Move your foot, in a single-kick motion,

without pausing, under and away from
the rear bumper detection area.

E300799

3. The liftgate closes.

Avoid the following actions when using the
hands-free opening feature:

•

Making physical contact with the bumper.

•

Holding your foot under the bumper.

•

Sweeping your foot from side to side, or
kicking at an odd angle.

Detection Zones

E253799

The detection area is on the left-hand side
and right-hand side of the rear bumper area.

Note: Some vehicles may have the ability to
detect the kicking motion from under the
trailer hitch.

Note: Allow the power system to close the
liftgate. Manually pushing the liftgate may
activate the system’s obstacle detection
feature and stop the power operation or
reverse its direction, replicate a strut failure,
or damage mechanical components.

102

Liftgate

STOPPING THE LIFTGATE
MOVEMENT

Note:  Do not apply sudden excessive force
to the liftgate while it is in motion.  This could
damage the power liftgate and its
components.

Note: Selections will vary depending on
region or options.

You can stop the liftgate movement by doing
any of the following:
•

Pressing the liftgate control button on
the liftgate.

•

Pressing the liftgate control button inside
the vehicle.

•

Pressing the liftgate button on the remote
control twice.

•

Pressing the liftgate button on an
authorized device.

•

Moving your foot under and away from
the center rear bumper in a single-kick
motion.

LIFTGATE OBSTACLE DETECTION

Closing the Liftgate

The system stops when it detects an
obstacle.  A tone sounds and the system
reverses to open.  Once you remove the
obstacle, you can power close the liftgate.

Note: To prevent accidental obstacle
detection, let the power liftgate close
completely before you enter your vehicle.

Opening the Liftgate

The system stops when it detects an
obstacle and a tone sounds.  Once you
remove the obstacle, you can continue to
operate the liftgate.

OPENING AND CLOSING THE
LIFTGATE WINDOW

E349965

Glass.

A

Door.

B

1. Unlock the liftgate window with the

remote control or power door unlock
control.  If the remote control is within
3 ft (1 m) of the liftgate, the liftgate
window unlocks when you press the
release button.

2. Press button A and then lift to open.

103

Liftgate