Lincoln Continental (2020 year). Manual in english - page 28

To adjust the temperature, say:

Description

Voice command

Adjust the temperature between 60–85°F (15.5–29.5°C).

Set Temperature ___

Phone

Description

Voice Command

Pair a cell phone or Bluetooth enabled device.

Pair Phone

Redial the last number that you dialed.

Redial

Dial a number.

1

Dial ___

Call a specific contact from your phonebook.

2

Call ___

Call a specific contact from your phonebook at a specific location.

3

Call ___ ___

Listen to a text message.

Listen to Message

451

SYNC™ 3

Description

Voice Command

Listen to a specific text message from a list of text messages.

Listen to Message ___

Reply to the last text message.

Reply to Message

1 

Add the number you want to dial to the command.

2 

Add a contact name from your phonebook to the command. Say the first and last name of your contact exactly as it appears on your device.

3 

Add a contact name and location from your phonebook to the command. Say the first and last name of your contact exactly as it appears

on your device.

452

SYNC™ 3

Navigation

 (If Equipped)

Setting a Destination

Description

Voice Command

Enter a destination address. When prompted, provide the house number, the street
and city.

Find an Address

Search for a point of interest by name or by category.

Find a Place

Search for a nearby point of interest by category.

1

Find the Next ___

Search for a point of interest category.

1

Find a POI Category

Set your saved home address as your destination.

Drive Home

Set your saved place of work as your destination.

Drive to Work

Display and select from a list of previous destinations.

Show Previous Destinations

Display and select from a list of favorite destinations.

Show Favorites

1 

Add a point of interest category or the name of a major brand or chain to the command.

453

SYNC™ 3

Route Guidance

Description

Voice Command

Cancel the current route.

Cancel Route

Select an alternate route.

Detour

Repeat the last guidance prompt.

Repeat Instruction

Display an overview of the route.

Show Route

Display a list of traffic events on your route.

Show Traffic

Display the map on the touchscreen.

Show Map

Display a two-dimensional map with north toward the top of the touchscreen.

North Up

Display a two-dimensional map with the direction you are traveling toward the top
of the touchscreen.

Heading Up

Display a three-dimensional map with the direction you are traveling toward the
front.

Show 3D

454

SYNC™ 3

Apps

General

Description

Voice Command

Start an app. The system prompts you for the app name.

Mobile Applications

Get a list of apps running on your device.

List Applications

Search and connect to apps running on your device.

Find Applications

Active App

Description

Voice Command

Get a list of voice commands for a specific app.

1

___ Help

Close an app.

1

Exit ___

1 

Add an app name to the command.

455

SYNC™ 3

SiriusXM Traffic and Travel Link

 (If Equipped)

Description

Voice command

Displays a list of traffic incidents.

Show Traffic

Displays the current weather map.

Show Weather Map

Displays a list of fuel prices.

Show Fuel Prices

Displays the 5 day weather forecast.

Show 5 Day Fore-
cast

Voice Settings

Description

Voice Command

Go to the voice settings menu.

Voice Settings

Switch long voice prompts on.

Interaction Mode Novice

Switch short voice prompts on.

Interaction Mode Advanced

Switch call confirmation on. The system prompts you to confirm before making a
call.

Phone Confirmation On

456

SYNC™ 3

Description

Voice Command

Switch call confirmation off. The system does not prompt you to confirm before
making a call.

Phone Confirmation Off

Switch the display of voice commands on.

Voice Command Lists On

Switch the display of voice commands off.

Voice Command Lists Off

Automatic Blower Motor Speed
Reduction

If necessary, the system decreases the
blower motor speed when you are using
voice commands to reduce the amount of
background noise in your vehicle. It returns
to normal when you are done.

Switching Automatic Blower Motor Speed
Reduction Off

Simultaneously press the A/C and
recirculated air buttons.

457

SYNC™ 3

ENTERTAINMENT

A

B

E293491

Audio source. Select to choose a
different audio source.

A

Presets. Swipe left to view more
presets.

B

You can access these options using the
touchscreen or voice commands.

Sources

Press this button to select the source of
media you want to listen to.

Menu Item

AM

FM

1

SIRIUS

1

CD

458

SYNC™ 3

Menu Item

The name of the USB that is plugged in displays here.

USB

Bluetooth Stereo

If you have SYNC 3 compatible apps on your connected smart phone, they display here as individual source selections.

Apps

1 

This feature may not be available in all markets and requires an active subscription.

AM/FM Radio

Tuning a Station

You can use the tune or seek controls on the
radio bezel to select a station.

To tune a station using the touchscreen,
select:

Menu Item

Direct Tune

A pop up appears, allowing you to type in
the frequency of a station. You can only enter
a valid station for the source you are
currently listening to.

You can press the backspace button to
delete the previously entered number.

Once you have entered the station's call
numbers, you can select:

Action and Descrip-

tion

Menu Item

Press to begin
playing the station
you have entered.

Enter

Press to exit without
changing the station.

Cancel

Presets

To set a new preset, tune to the station and
then press and hold one of the memory
preset buttons. The audio mutes briefly while
the system saves the station and then
returns.

459

SYNC™ 3

You may be able to add additional preset
pages using the settings option on the
feature bar.

SiriusXM® Satellite Radio (If Activated)

Note:  This feature may not be available in
all markets and requires an active
subscription.

E234451

SiriusXM satellite radio is a
subscription-based satellite radio service that
broadcasts a variety of music, sports, news,
weather, traffic and entertainment
programming. Your factory-installed SiriusXM
satellite radio system includes hardware and
a limited subscription term that begins on
the date of sale or lease of your vehicle. See
an authorized dealer for availability.

For more information on extended
subscription terms (a service fee is required),
the online media player and a list of SiriusXM
satellite radio channels, and other features,
please visit www.siriusxm.com in the United
States, www.siriusxm.ca in Canada, or call
SiriusXM at 1-888-539-7474.

Note: SiriusXM reserves the unrestricted
right to change, rearrange, add or delete
programming. This includes canceling,
moving or adding particular channels, and
its prices, at any time, with or without notice
to you. We are not responsible for any such
programming changes.

Note: This receiver includes the eCos
real-time operating system. eCos is
published under the eCos License.

The following buttons are available for SiriusXM:

Action and Description

Menu Item

Touch this button to see a list of available stations.

Browse

A pop-up appears, allowing you to type in the call numbers of a station.

Direct Tune

Once you enter the stations call numbers, you can select:

The system tunes to the station you select.

Enter

You exit the pop-up and the current station continues to play.

Cancel

460

SYNC™ 3

Action and Description

Menu Item

You can press the backspace button to delete the previous number.

Replay audio on the current channel. You can replay approximately 45 minutes of audio as long as
you remain tuned to the current station. Changing stations erases the previous audio.

Replay

When you are in replay mode, you are not able to select a different
preset until you return to live audio. Pressing this button returns you
to the live broadcast.

Live

Save the current song, artist, or team as a favorite. The system alerts you when it plays again on
any channel.

ALERT

Selecting this button allows you to enable and edit alerts.  See Settings (page 486).

Memory Presets

To set a preset, tune to the station then press
and hold one of the memory preset buttons.
The audio mutes briefly while the system
saves the station and returns once the
station is stored.

You may be able to add additional preset
pages using the settings option on the
feature bar.

Satellite Radio Electronic Serial Number
(ESN)

You need your ESN to activate, modify or
track your satellite radio account.  See
Settings (page 486).

461

SYNC™ 3

SiriusXM Satellite Radio Reception Factors and Troubleshooting

Potential Reception Issues

For optimal reception performance, keep the antenna clear of snow and ice build-up and keep
luggage and other materials as far away from the antenna as possible.

Antenna obstructions

Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree
foliage and thunderstorms can interfere with your reception.

Terrain

When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a
weaker one and the audio system may mute.

Station overload

Your display may show ACQUIRING... to indicate the interference and the audio system may mute.

Satellite radio signal interference

Troubleshooting Tips

Action

Cause

Message

No action required.  This message should disap-
pear shortly.

Radio requires more than two seconds to produce
audio for the selected channel.

Acquiring Signal

If this message does not clear shortly, or with an
ignition key cycle, your receiver may have a fault.
See an authorized dealer for service.

There is an internal module or system failure
present.

Satellite antenna fault

SIRIUS system failure

Tune to another channel or choose another preset.

The channel is no longer available.

Invalid Channel

462

SYNC™ 3

Troubleshooting Tips

Action

Cause

Message

Contact SiriusXM at 1-888-539-7474 to subscribe
to the channel, or tune to another channel.

Your subscription does not include this channel.

Unsubscribed Channel

The signal is blocked. When you move into an
open area, the signal should return.

The signal is lost from the SiriusXM satellite or
SiriusXM tower to your vehicle antenna.

Satellite acquiring signal…

No action required.  The process may take up to
three minutes.

Update of channel programming in progress.

Updating…

Contact SiriusXM at 1-888-539-7474 to resolve
subscription issues.

Your satellite service is no longer available.

Questions? Call 1-888-539-7474

Use the channel guide or the Sirius XM Settings
tile to turn off the Lock or Skip function on that
station.

All the channels in the selected category are either
skipped or locked.

None found. Check channel guide.

No action required.

SiriusXM has updated the channels available for
your vehicle.

SIRIUS Subscription updated

HD Radio™ Information (If Available)

To activate HD radio, please see the Radio
Settings in the Settings Chapter.  See
Settings (page 486).

Note: HD Radio broadcasts are not available
in all markets.

463

SYNC™ 3

HD Radio technology is the digital evolution
of analog AM/FM radio. Your system has a
special receiver that allows it to receive
digital broadcasts (where available) in
addition to the analog broadcasts, it already
receives. Digital broadcasts provide a better
sound quality than analog broadcasts with
free, crystal-clear audio and no static or
distortion. For more information, and a guide
to available stations and programming,
please visit:

Website

www.hdradio.com

When HD Radio is on and you tune to a
station broadcasting HD Radio technology,
you may notice the following indicators on
your screen:

E142616

The HD logo is grey when acquiring a digital
station, and then changes to orange when
digital audio is playing. When this logo is
available, you may also see Title and Artist
fields on-screen.

The multicast indicator appears in FM mode
(only) if the current station is broadcasting
multiple digital broadcasts. The highlighted
numbers signify available digital channels
where new or different content is available.
HD1 signifies the main programming status
and is available in analog and digital
broadcasts. Other multicast stations (HD2
through HD7) are only available digitally.

Note:  There is also an additional feature for
stations that have more than 1 HD multicast
(For example, HD1 or HD2). The HD logo and
Radio text appears as a button. Pressing this
button allows you to cycle through all of the
HD stations on that specific frequency. For
example, if you are on 101.1 and it has HD1,
HD2, HD3, pressing the button repeatedly
causes the radio to cycle through the HD
stations in a cyclic increasing order.

464

SYNC™ 3

When HD Radio broadcasts are active, you can access the following functions:

Action and Description

Message

Allows you to save an active channel as a memory preset. Touch and hold a memory preset slot
until the sound returns. There is a brief mute while the radio saves the station. Sound returns
when the channel saves. When switching to an HD2 or HD3 memory preset, the sound mutes
before the digital audio plays, because the system has to reacquire the digital signal.

Presets

Note: As with any station you save, you cannot access the saved station if your vehicle is outside the station’s reception area.

HD Radio Reception and Station Troubleshooting

Potential Reception Issues

If you are listening to a multicast station and you are on the fringe of the reception area, the station
may mute due to weak signal strength.

Reception area

If you are listening to HD1, the system changes back to the analog broadcast until the digital
broadcast is available again. However, if you are listening to any of the possible HD2-HD7 multicast
channels, the station mutes and stays muted unless it is able to connect to the digital signal again.

When the system first receives a station (aside from HD2-HD7 multicast stations), it first plays the
station in the analog version. Once the receiver verifies the station is an HD Radio station, it shifts
to the digital version. Depending on the station quality, you may hear a slight sound change when
the station changes from analog to digital. Blending is the shift from analog to digital sound or
digital back to analog sound.

Station blending

465

SYNC™ 3

In order to provide the best possible
experience, use the contact form to report
any station issues found while listening to a
station broadcasting with HD Radio

technology. Independent entities own and
operate each station. These stations are
responsible for ensuring all audio streams
and data fields are accurate.

Potential Station Issues

Action

Cause

Issues

No action required.  This is a broadcast issue.

This is poor time alignment by the radio broad-
caster.

Echo, stutter, skip or repeat in audio.
Increase or decrease in audio
volume.

No action required.  The reception issue may clear
up as you continue to drive.

The radio is shifting between analog and digital
audio.

Sound fading or blending in and out.

No action required.  This is normal behavior.  Wait
until the audio is available.

The digital multicast is not available until the HD
Radio broadcast is decoded. Once decoded, the
audio is available.

There is an audio mute delay when
selecting HD2 or HD3, multicast
preset or Direct Tune.

No action required.  The station is not available in
your current location.

The previously stored multicast preset or direct
tune is not available in your current reception area.

Cannot access HD2 or HD3 multicast
channel when recalling a preset or
from a direct tune.

Fill out the station issue form.

1

Data service issue by the radio broadcaster.

Text information does not match
currently playing audio.

Fill out the station issue form. 

1

Data service issue by the radio broadcaster.

There is no text information shown
for currently selected frequency.

1 

 You can find the form here:

466

SYNC™ 3