Dodge Durango (2022 year). Manual in english - page 11

170

MULTIMEDIA

Mirrors & Wipers

Lights

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Tilt Side Mirrors In Reverse

This setting will tilt the outside side-view mirrors when the ignition is in the

ON/RUN position and the transmission gear selector is in the REVERSE

position. The mirrors will move back to their previous position when the

transmission is shifted out of REVERSE. The available settings are “On”

and “Off”.

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

Headlights With Wipers

This setting will turn the headlights on when the wipers are activated.

When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.
NOTE:



When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country

of the vehicle purchased.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Headlight Off Delay

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is turned off. The available settings are “0 sec”,

“30 sec”, “60 sec”, and “90 sec”.

MULTIMEDIA

171

Doors & Locks

Headlight Illumination On Approach

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is unlocked. The available settings are “0 sec”,

“30 sec”, “60 sec”, and “90 sec”.

Headlights with Wipers

This setting will turn the headlights on when the wipers are activated.

Auto Dim High Beams

This setting will allow you to turn the Auto Dim High Beams on or off.

Daytime Running Lights

This setting will allow you to turn the Daytime Running Lights on or off.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock

button is pushed on the key fob on or off.

Setting Name

Description

When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.
NOTE:



The Auto Door Locks feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 12 mph

(20 km/h). The Auto Door Locks feature can be enabled or disabled by an authorized dealer per written request of the customer. Please see an authorized

dealer for service.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Door Locks

This setting will allow you to change if the doors lock automatically when

the vehicle reaches 12 mph (19 km/h).

Auto Unlock On Exit

This setting will unlock the doors when any of the doors are opened from

the inside.

172

MULTIMEDIA

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the

Lock button is pushed on the key fob on or off.

Sound Horn With Lock

This setting will sound the horn when the Lock button is pushed on the key

fob. The “Off” setting will not sound the horn when the Lock button is pushed.

The “1st Press” setting will sound the horn when the Lock button is pushed

once. The “2nd Press” setting will sound the horn when the Lock button is

pushed twice.

Sound Horn With Remote Start

This setting will sound the horn when the remote start is activated from the

key fob.

Remote Door Unlock

This setting will change how many pushes of the Unlock button on the key fob

are needed to unlock all the doors. The “Driver Door” setting will only unlock

the driver door on the first push on the Unlock button. The “All Doors” setting

will unlock all doors with only one push of the Unlock button.

Passive Entry

This setting will allow you to turn the Passive Entry feature

(Keyless Enter ‘n Go™) on or off.

Personal Settings Linked to Key Fob

This setting will recall preset radio stations and driver seat position that have

been linked to the key fob.

Power Liftgate Alert

This setting will chime an audible alert when the power liftgate is raising or

lowering. Selectable settings are “On” and “Off”.

Setting Name

Description

MULTIMEDIA

173

Seats & Comfort/Auto-On Comfort

When Seats & Comfort/Auto-On Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when

remote start has been activated or the vehicle has been started.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Easy Exit Seats

This setting will automatically move the driver seat rearward when the engine

is shut off. The available settings are “On” and “Off”.

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With

Vehicle Start

This setting will activate the vehicle’s comfort systems and heated seats or

heated steering wheel when the vehicle is remote started or ignition is

started. The “Off” setting will not activate the comfort systems. The “Remote

Start” setting will only activate the comfort systems when using Remote Start.

The “All Start” setting will activate the comfort systems whenever the vehicle

is started. If equipped, the only selectable option will be “With Vehicle Start”.

174

MULTIMEDIA

Key Off/Engine Off Options

When the Key Off /Engine Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only

activate when the ignition is set to OFF.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Easy Exit Seats

This setting adjusts the seats to make exiting the vehicle easier.

Key Off/Engine Off Power Delay

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate.

The available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Headlight Off Delay

This setting will allow you to set the amount of time the headlights remain on

after the vehicle has been turned off. The “+” will increase the amount of

time. The “-” will decrease the amount of time.

MULTIMEDIA

175

Audio

When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio

location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Balance/Fade

This setting will adjust audio levels from specific speakers in the front/back

and left/right of the vehicle. The Speaker icon can be moved to set audio

location.

Equalizer

This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the audio.

Speed Adjusted Volume

This setting will adjust audio volume as speeds increase. At a higher setting,

the volume will increase more as the vehicle speeds up. The available settings

are “Off”, “1”, “2”, and “3”.

Surround Sound

This setting will turn the Surround Sound system on or off.

AUX Volume Offset

This setting will tune the audio levels from a device connected through the

AUX port. The available settings are “+” and “-”.

Auto Play

This setting will automatically begin playing audio from a connected device.

Auto On Radio

This setting will turn the radio on with vehicle start and recall the last known

radio state. The available options are “On”, “Off”, and “Last Recall”.

Volume Adjustment

This setting will let you adjust the volume levels for “Media”, “Phone”,

“Navigation”, and “VR” (Voice Recognition).

176

MULTIMEDIA

Notifications

When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

App Drawer Favoriting Pop-Ups

This setting turns the “App Favorited” pop-up on or off.

App Drawer Unfavoriting Pop-Ups

This setting turns the “App Unfavorited” pop-up on or off.

New Text Message Pop-Ups

This setting turns receiving/storing a pop-up for new text messages of any

connected phone on or off.

Missed Calls Message

This setting turns receiving/storing a pop-up for missed calls of any connected

phone on or off.

Navigation Pop-ups

This setting turns receiving/storing predictive Navigation Pop-ups on or off.

MULTIMEDIA

177

SiriusXM® Setup

When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used

to skip specific radio channels and restart favorite songs from the beginning.
NOTE:



A subscription to SiriusXM® satellite radio is required for these settings to be functional.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

SiriusXM® Account, Profiles, & Settings

This setting will direct you to the SiriusXM® Profile settings.

Block Explicit

This setting will skip over content labeled as explicit. The available settings

are “On” and “Off”.

Tune Start

This setting will play the current song from the beginning when you tune to a

music channel using one of the 12 presets.

Channel Skip

This setting allows you to set channels that you wish to skip. A channel list will

display of the skipped channels.

Subscription Information

This menu provides SiriusXM® subscription information.

178

MULTIMEDIA

Accessibility

When the Accessibility button is pressed on the touchscreen, the system will display the option related to the vehicle’s theater system.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Accessibility

The “Accessibility” feature announces a function prior to performing the

action selected when using DVD/Blu-ray™ and USB Video functions, when it is

activated. For example, when activated, and the Play button is selected, the

system will announce “play button selected”, and then once pressed again

the Play button will perform its action.

MULTIMEDIA

179

Software Update

System Information

When the Software Update button is selected, the system will display a menu with possible Wi-Fi connections. From this page, you can select and connect to

one of the available Wi-Fi networks to begin system software updates. To begin, make sure the system is set to allow for Wi-Fi updates.
1. Select the desired Wi-Fi network from the available list.
2. Enter the Wi-Fi password. If the password is entered incorrectly, the system will display a notification that the connection failed.
3. Once connected, the system will begin scanning for any system updates. Press the Stop Scan button to end this process.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

When the System Information button is pressed on the touchscreen, the system displays the radio system information.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Version Information

When this feature is selected, the radio version build will be displayed.

License Information

When this feature is selected, a Software License screen will appear,

displaying the system software version.

180

MULTIMEDIA

Reset

When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings.

These settings can clear personal data and reset selected settings from other menus.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Restart Radio

This setting will reboot the radio.

Reset App Drawer to Default Order

This setting will reset the App Drawer to its factory default layout.

Restore Apps

This setting will delete all installed Apps on the vehicle.

Restore Settings to Default

This setting will return all the previously changed settings to their factory

default.

Clear Personal Data

This setting will display a pop-up that gives you the option to clear all personal

data from the system, including Bluetooth® devices and presets.

Reset Wi-Fi Password For Projection

This setting will reset the password used for the in-vehicle Wi-Fi.

Factory Reset

This setting will restore the radio to its factory default settings.

MULTIMEDIA

181

STEERING WHEEL AUDIO CONTROLS

The Remote Sound System controls are located on

the rear surface of the steering wheel. Reach

behind the wheel to access the switches.

Steering Wheel Audio Controls

The right-hand control is a rocker-type switch with

a push button in the center and controls the

volume and mode of the sound system. Pushing

the top of the rocker switch increases the volume,

and pushing the bottom of the rocker switch

decreases the volume.
Pushing the center button makes the radio switch

between the various modes available (AM/FM/

SXM or Media, etc.)
The left-hand control is a rocker-type switch with a

push button in the center. The function of the

left-hand control is different depending on which

mode you are in.

The following describes the left-hand control

operation in each mode.

ADIO

PERATION

Pushing the top of the switch will “seek” up for the

next listenable station, and pushing the bottom of

the switch will “seek” down for the next listenable

station.
The button located in the center of the left-hand

control will tune to the next preset station that you

have programmed in the radio preset button.

EDIA

ODE

Pushing the top of the switch once goes to the

next track on the selected media (AUX/USB/

Bluetooth®). Pushing the bottom of the switch

once goes to the beginning of the current track, or

to the beginning of the previous track if it is within

eight seconds after the current track begins to

play.

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being

on in your vehicle can cause erratic or noisy

performance from your radio. This condition may

be lessened or eliminated by repositioning the

mobile phone within the vehicle. This condition is

not harmful to the radio. If your radio performance

does not satisfactorily improve from repositioning

the mobile phone, it is recommended that the

volume be turned down or off during mobile phone

operation when not using the Uconnect system.

EGULATORY

AFETY

NFORMATION

US/CANADA
Exposure to Radio Frequency Radiation
The radiated output power of the internal wireless

radio is far below the FCC and IC radio frequency

exposure limits. Nevertheless, the wireless radio

will be used in such a manner that the radio is 8 in

(20 cm) or further from the human body.
The internal wireless radio operates within

guidelines found in radio frequency safety

standards and recommendations, which reflect

the consensus of the scientific community.
The radio manufacturer believes the internal

wireless radio is safe for use by consumers.

The level of energy emitted is far less than the

electromagnetic energy emitted by wireless

devices such as mobile phones. However, the use

of wireless radios may be restricted in some

situations or environments, such as aboard

airplanes. If you are unsure of restrictions, you are

encouraged to ask for authorization before turning

on the wireless radio

page 316.

182

(Continued)

SAFETY

SAFETY FEATURES

NTI

-L

OCK

RAKE

YSTEM

(ABS)

The ABS provides increased vehicle stability and

brake performance under most braking conditions.

The system automatically prevents wheel lock and

enhances vehicle control during braking.
The ABS performs a self-check cycle to ensure that

the ABS is working properly each time the vehicle

is started and driven. During this self-check, you

may hear a slight clicking sound as well as some

related motor noises.
The ABS is activated during braking when the

system detects one or more wheels are beginning

to lock. Road conditions such as ice, snow, gravel,

bumps, railroad tracks, loose debris, or panic stops

may increase the likelihood of ABS activation(s).
You also may experience the following normal

characteristics when the ABS activates:



ABS motor noise or clicking sounds (you may

continue to hear for a short time after the stop).



Brake pedal pulsations.



A slight drop of the brake pedal at the end of the

stop.

The ABS is designed to function with the Original

Equipment Manufacturer (OEM) tires. Modification

may result in degraded ABS performance.

Anti-Lock Brake System (ABS) Warning

Light

The yellow ABS Warning Light will turn on when the

ignition is placed in the ON/RUN mode and may

stay on for as long as four seconds.
If the ABS Warning Light remains on or comes on

while driving, it indicates that the anti-lock portion

of the brake system is not functioning and that

service is required. However, the conventional

brake system will continue to operate normally if

the ABS Warning Light is on.

WARNING!



The ABS contains sophisticated electronic

equipment that may be susceptible to interfer

ence caused by improperly installed or high

output radio transmitting equipment. This

interference can cause possible loss of

anti-lock braking capability. Installation of

such equipment should be performed by qual

ified professionals.



Pumping of the Anti-Lock Brakes will diminish

their effectiveness and may lead to a collision.

Pumping makes the stopping distance longer.

Just press firmly on your brake pedal when you

need to slow down or stop.



The ABS cannot prevent the natural laws of

physics from acting on the vehicle, nor can it

increase braking or steering efficiency beyond

that afforded by the condition of the vehicle

brakes and tires or the traction afforded.



The ABS cannot prevent collisions, including

those resulting from excessive speed in turns,

following another vehicle too closely, or hydro

planing.



The capabilities of an ABS equipped vehicle

must never be exploited in a reckless or

dangerous manner that could jeopardize the

user’s safety or the safety of others.

WARNING!

SAFETY

183

If the ABS Warning Light is on, the brake system

should be serviced as soon as possible to restore

the benefits of Anti-Lock Brakes. If the ABS

Warning Light does not come on when the ignition

is placed in the ON/RUN mode, have the light

repaired as soon as possible.

EAR

EAT

EMINDER

LERT

(RSRA)

RSRA will consider the presence of an object in the

rear seat when a rear entry/exit door is opened at

the beginning of each key cycle. To activate, the

rear door must be open for more than one second

and the vehicle must be placed in the ON/RUN

position within 10 minutes. When the potential

presence of an object is determined and/or

otherwise inferred, a message will appear in the

instrument cluster display reminding driver to

check the rear seat(s) immediately after key off

accompanied by an alert upon exiting the vehicle.
To enable or disable RSRA, see

page 156.

LECTRONIC

RAKE

ONTROL

(EBC)

YSTEM

Your vehicle is equipped with an advanced

Electronic Brake Control (EBC) system. This system

includes Anti-Lock Brake System (ABS), Brake

Assist System (BAS), Electronic Brake Force

Distribution (EBD), Electronic Roll Mitigation

(ERM), Electronic Stability Control (ESC), Hill Start

Assist (HSA), and Traction Control System (TCS).

These systems work together to enhance both

vehicle stability and control in various driving

conditions.
Your vehicle may also be equipped with Dynamic

Steering Torque (DST), Rain Brake Support (RBS),

Ready Alert Braking (RAB), and Trailer Sway

Control (TSC).

Brake Assist System (BAS)

The BAS is designed to optimize the vehicle’s

braking capability during emergency braking

maneuvers. The system detects an emergency

braking situation by sensing the rate and amount

of brake application and then applies optimum

pressure to the brakes. This can help reduce

braking distances. The BAS complements the

Anti-Lock Brake System (ABS). Applying the brakes

very quickly results in the best BAS assistance. To

receive the benefit of the system, you must apply

continuous braking pressure during the stopping

sequence (do not “pump” the brakes). Do not

reduce brake pedal pressure unless braking is no

longer desired. Once the brake pedal is released,

the BAS is deactivated.

Brake System Warning Light

The red Brake System Warning Light will turn on

when the ignition is placed in the ON/RUN mode

and may stay on for as long as four seconds.
If the Brake System Warning Light remains on or

comes on while driving, it indicates that the brake

system is not functioning properly and that

immediate service is required. If the Brake System

Warning Light does not come on when the ignition

is placed in the ON/RUN mode, have the light

repaired as soon as possible.

WARNING!

The Brake Assist System (BAS) cannot prevent

the natural laws of physics from acting on the

vehicle, nor can it increase the traction afforded

by prevailing road conditions. BAS cannot

prevent collisions, including those resulting from

excessive speed in turns, driving on very slippery

surfaces, or hydroplaning. The capabilities of a

BAS-equipped vehicle must never be exploited in

a reckless or dangerous manner, which could

jeopardize the user's safety or the safety of

others.

184

SAFETY

Dynamic Steering Torque (DST)

DST is a feature of the ESC and Electric Power

Steering (EPS) modules that, when equipped,

provides torque at the steering wheel for certain

driving conditions in which the ESC module is

detecting vehicle instability. The torque that the

steering wheel receives is only meant to help the

driver realize optimal steering behavior in order to

reach/maintain vehicle stability. The only

notification the driver receives that the feature is

active is the torque applied to the steering wheel.
NOTE:

The DST feature is only meant to help the driver

realize the correct course of action through small

torques on the steering wheel, which means the

effectiveness of the DST feature is highly

dependent on the driver’s sensitivity and overall

reaction to the applied torque. It is very important

to realize that this feature will not steer the vehicle,

meaning the driver is still responsible for steering

the vehicle.

Electronic Brake Force Distribution (EBD)

EBD manages the distribution of the braking

torque between the front and rear axles by limiting

braking pressure to the rear axle. This is done to

prevent overslip of the rear wheels to avoid vehicle

instability, and to prevent the rear axle from

entering ABS before the front axle.

Electronic Roll Mitigation (ERM)

ERM anticipates the potential for wheel lift by

monitoring the driver’s steering wheel input and

the speed of the vehicle. When Electronic Roll

Mitigation (ERM) determines that the rate of

change of the steering wheel angle and vehicle’s

speed are sufficient to potentially cause wheel lift,

it then applies the appropriate brake and may also

reduce engine power to lessen the chance that

wheel lift will occur. ERM can only reduce the

chance of wheel lift occurring during severe or

evasive driving maneuvers; it cannot prevent

wheel lift due to other factors, such as road

conditions, leaving the roadway, or striking objects

or other vehicles.

Electronic Stability Control (ESC)

ESC enhances directional control and stability of

the vehicle under various driving conditions. ESC

corrects for oversteering or understeering of the

vehicle by applying the brake of the appropriate

wheel(s) to counteract the above conditions.

Engine power may also be reduced to help the

vehicle maintain the desired path.



Oversteer — when the vehicle is turning more

than appropriate for the steering wheel position.



Understeer — when the vehicle is turning less

than appropriate for the steering wheel position.

ESC uses sensors in the vehicle to determine the

vehicle path intended by the driver and compares

it to the actual path of the vehicle. When the actual

path does not match the intended path, ESC

applies the brake of the appropriate wheel to

assist in counteracting the oversteer or understeer

condition.
The ESC Activation/Malfunction Indicator Light

located in the instrument cluster will start to flash

as soon as the ESC system becomes active. The

ESC Activation/Malfunction Indicator Light also

flashes when the Traction Control System (TCS) is

active. If the ESC Activation/Malfunction Indicator

Light begins to flash during acceleration, ease up

on the accelerator and apply as little throttle as

possible. Be sure to adapt your speed and driving

to the prevailing road conditions.

WARNING!

Many factors, such as vehicle loading, road

conditions and driving conditions, influence the

chance that wheel lift or rollover may occur.

ERM cannot prevent all wheel lift or rollovers,

especially those that involve leaving the roadway

or striking objects or other vehicles. The

capabilities of an ERM-equipped vehicle must

never be exploited in a reckless or dangerous

manner which could jeopardize the user's safety

or the safety of others.

SAFETY

185

(Continued)

ESC Operating Modes

Depending upon model and mode of operation, the

ESC system may have multiple operating modes.
ESC On
This is the normal operating mode for the ESC.

Whenever the vehicle is started, the ESC system

will be in this mode. This mode should be used for

most driving conditions. Alternate ESC modes

should only be used for specific reasons as noted

in the following paragraphs.

Partial Off
This mode may be useful if the vehicle becomes

stuck. This mode may modify TCS and ESC

thresholds for activation, which allows for more

wheel spin than normally allowed.
To enter the “Partial Off” mode, momentarily push

the ESC OFF button and the ESC OFF Indicator

Light will illuminate. To turn the ESC on again,

momentarily push the ESC OFF button and the ESC

OFF Indicator Light will turn off.
NOTE:

For vehicles with multiple partial ESC modes, the

push and release of the button will toggle the ESC

modes. Multiple attempts may be required to

return to "ESC On" mode.

WARNING!



Electronic Stability Control (ESC) cannot

prevent the natural laws of physics from

acting on the vehicle, nor can it increase the

traction afforded by prevailing road condi

tions. ESC cannot prevent accidents, including

those resulting from excessive speed in turns,

driving on very slippery surfaces, or hydro

planing. ESC also cannot prevent accidents

resulting from loss of vehicle control due to

inappropriate driver input for the conditions.

Only a safe, attentive, and skillful driver can

prevent accidents. The capabilities of an ESC

equipped vehicle must never be exploited in a

reckless or dangerous manner which could

jeopardize the user’s safety or the safety of

others.



Vehicle modifications, or failure to properly

maintain your vehicle, may change the

handling characteristics of your vehicle, and

may negatively affect the performance of the

ESC system. Changes to the steering system,

suspension, braking system, tire type and size

or wheel size may adversely affect ESC perfor

mance. Improperly inflated and unevenly worn

tires may also degrade ESC performance. Any

vehicle modification or poor vehicle mainte

nance that reduces the effectiveness of the

ESC system can increase the risk of loss of

vehicle control, vehicle rollover, personal

injury and death.

WARNING!



When in “Partial Off” mode, the TCS function

ality of ESC, except for the limited slip feature

described in the TCS section, has been

disabled and the ESC OFF Indicator Light will

be illuminated. When in “Partial Off” mode,

the engine power reduction feature of TCS is

disabled, and the enhanced vehicle stability

offered by the ESC system is reduced.



Trailer Sway Control (TSC) is disabled when

the ESC system is in the “Partial Off” mode.

Content .. 9 10 11 12 ..