Dodge Grand Caravan (2020 year). Manual in english

INTRODUCTION

Dear Customer,
Congratulations on selecting your new vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. This Owner’s

Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your

vehicle. It is supplemented by Warranty Information and customer oriented documents. Within this information, you will find a description of the services

that FCA US LLC offers to its customers, the vehicle's warranty coverage, and the details of the terms and conditions for maintaining its validity. Please

take the time to read all of these publications carefully before driving your vehicle for the first time. Following the instructions, recommendations, tips,

and important warnings in this manual will help assure safe and enjoyable operation of your vehicle. Be sure you are familiar with all vehicle controls,

particularly those used for braking, steering, transmission, and transfer case shifting (if equipped). Learn how your vehicle handles on different road

surfaces. Your driving skills will improve with experience.
This Owner’s Manual describes all versions of this vehicle. Options and equipment dedicated to specific markets or versions are not expressly indicated

in the text. Therefore, you should only consider the information which is related to the trim level, engine, and version that you have purchased. Any

content introduced throughout the Owner’s Information, that may or may not be applicable to your vehicle, will be identified with the wording “If

Equipped”. All data contained in this publication are intended to help you use your vehicle in the best possible way. FCA US LLC aims at a constant

improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model described for technical and/or commercial

reasons. For further information, contact an authorized dealer.
When it comes to service, remember that authorized dealers know your vehicle best, have factory-trained technicians and genuine MOPAR® parts, and

care about your satisfaction.

HOW TO USE THIS MANUAL

Essential Information

Consult the Table of Contents to determine which section contains the information you desire.
Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle's

equipment.
The detailed Index at the back of this Owner's Manual contains a complete listing of all subjects.

Symbols

Some vehicle components have colored labels whose symbols indicate precautions to be observed when using this component. Refer to “Warning

Lights and Messages” in “Getting To Know Your Instrument Panel” for further information on the symbols used in your vehicle.

WARNINGS AND CAUTIONS

This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision, bodily injury and/or death. It also contains

CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important

information. Observe all Warnings and Cautions.

VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!

Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious

injury or death.

GETTING TO KNOW YOUR VEHICLE

KEYS

Key Fobs

Your vehicle uses a keyless ignition system. This

system consists of a Remote Keyless Entry

(RKE) key fob and a Wireless Ignition Node

(WIN) with integral ignition. You can insert the

key fob into the ignition switch with either side

up. It also contains an emergency key, which

stores in the rear of the key fob.

NOTE:

The key fob may not be found if it is located next

to a mobile phone, laptop or other electronic

device; these devices may block the key fob’s

wireless signal.

The emergency key allows for entry into the

vehicle should the battery in the vehicle or the

key fob become depleted. You can keep the

emergency key with you when valet parking.

To remove the emergency key, slide the

mechanical latch at the top of the key fob

sideways with your thumb and then pull the key

out with your other hand.

NOTE:

When using the emergency key to gain access

to your vehicle, be aware that the security alarm

may be triggered. Insert the key into the ignition

and place the ignition in the ON/RUN position to

disarm the security system.

Key Fob

Emergency Key Removal

To Unlock The Doors And Liftgate

Push and release the unlock button on the key

fob once to unlock the doors. Push and release

the unlock button a second time within five

seconds to unlock the liftgate. The turn signal

lights will flash to acknowledge the unlock

signal.

To Lock The Doors And Liftgate

Push and release the lock button on the key fob

once to lock the doors. The turn signal lights will

flash to acknowledge the lock signal.

GETTING TO KNOW YOUR VEHICLE

Replacing The Battery In The Key Fob With

Remote Control

The replacement battery is one CR2032

battery.

NOTE:



Perchlorate Material — special handling may

apply. See

www.dtsc.ca.gov/hazard

ouswaste/perchlorate

for further informa

tion.



Do not replace coin battery unless the instru

ment cluster display shows the message

“Key Fob Low Battery”.



Do not touch the battery terminals that are

on the back housing or the printed circuit

board.

1. Remove the emergency key by sliding the

mechanical latch on the back of the key

fob sideways with your thumb and then pull

the key out with your other hand.

Emergency WIN Key Removal

2. Gently pry the two halves of the key fob

apart. Make sure not to damage the seal

during removal.

Separating WIN Key Fob Case

3. Remove the battery by turning the back

cover over (battery facing downward) and

tapping it lightly on a solid surface such as

a table or similar, then replace the battery.

When replacing the battery, match the (+)

sign on the battery to the (+) sign on the

inside of the battery clip, located on the

back cover. Avoid touching the new battery

with your fingers. Skin oils may cause

battery deterioration. If you touch a battery,

clean it with rubbing alcohol.

4. To assemble the key fob case, line up the

two case halves, and snap them together.

Programming Additional Key Fobs

Programming the key fob may be performed by

an authorized dealer.

NOTE:

Once a key fob is programmed to a vehicle, it

cannot be repurposed and reprogrammed to

another vehicle.

GETTING TO KNOW YOUR VEHICLE

General Information

The following regulatory statement applies to all

Radio Frequency (RF) devices equipped in this

vehicle:
This device complies with Part 15 of the FCC

Rules and with Innovation, Science and

Economic Development Canada license-exempt

RSS standard(s). Operation is subject to the

following two conditions:

1. This device may not cause harmful

interference, and

2. This device must accept any interference

received, including interference that may

cause undesired operation.

Le présent appareil est conforme aux CNR

d`Innovation, Science and Economic

Development applicables aux appareils radio

exempts de licence. L'exploitation est autorisée

aux deux conditions suivantes:

1. l'appareil ne doit pas produire de

brouillage, et

2. l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compro

mettre le fonctionnement.

La operación de este equipo está sujeta a las

siguientes dos condiciones:

1. es posible que este equipo o dispositivo no

cause interferencia perjudicial y

2. este equipo o dispositivo debe aceptar

cualquier interferencia, incluyendo la que

pueda causar su operación no deseada.

NOTE:

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

IGNITION SWITCH

Wireless Ignition Node (WIN)

The Wireless Ignition Node (WIN) operates

similar to an ignition switch. It has four

operating positions, three with detents and one

that is spring-loaded. The detent positions are

OFF, ACC, and ON/RUN. The START position is a

spring-loaded momentary contact position.

When released from the START position, the

switch automatically returns to the ON/RUN

position.

Wireless Ignition Switch

1 — OFF
2 — ACC (Accessory)
3 — ON/RUN
4 — START

GETTING TO KNOW YOUR VEHICLE

REMOTE START — IF EQUIPPED

How To Use Remote Start

All of the following conditions must be met

before the engine will remote start:



Gear selector in PARK



Doors closed



Hood closed



Liftgate closed



Hazard switch off



Brake switch inactive (brake pedal not

pushed)



Battery at an acceptable charge level



System not disabled from previous remote

start event



Vehicle security alarm not active



Ignition in OFF position



Malfunction Indicator Light is not illuminated

Remote Start Abort Messages

The following messages will display in the

instrument cluster display if the vehicle fails to

remote start or exits remote start prematurely:



Remote Start Aborted — Door Ajar



Remote Start Aborted — Hood Ajar



Remote Start Aborted — Fuel Low



Remote Start Aborted — L/Gate Ajar



Remote Start Disabled — Start Vehicle To

Reset

The instrument cluster display message stays

active until the ignition is placed in the ON/RUN

position.

To Enter Remote Start Mode

Push and release the Remote Start button on

the key fob twice within five seconds. The

vehicle doors will lock, the turn signals will flash

twice, and the horn will chirp twice. Then the

engine will start, and the vehicle will remain in

the Remote Start mode for a 15 minute cycle.

NOTE:



If an engine fault is present or fuel level is

low, the vehicle will start and then shut down

in 10 seconds.



The park lamps will turn on and remain on

during Remote Start mode.



For security, power window operation is

disabled when the vehicle is in the Remote

Start mode.



The engine can be started two consecutive

times (two 15 minute cycles) with the key

fob. However, the ignition must be placed in

the ON/RUN position before you can repeat

the start sequence for a third cycle.

WARNING!



Do not start or run an engine in a closed

garage or confined area. Exhaust gas

contains Carbon Monoxide (CO) which is

odorless and colorless. Carbon Monoxide is

poisonous and can cause serious injury or

death when inhaled.



Keep key fobs away from children. Opera

tion of the Remote Start System, windows,

door locks or other controls could cause

serious injury or death.

GETTING TO KNOW YOUR VEHICLE

To Exit Remote Start Mode Without Driving

The Vehicle

Push and release the Remote Start button one

time or allow the remote start cycle to complete

the entire 15 minute cycle.

NOTE:

To avoid unintentional shutdowns, the system

will disable for two seconds after receiving a

valid Remote Start request.

To Exit Remote Start Mode And Drive The

Vehicle

Before the end of the 15 minute cycle, push and

release the unlock button on the key fob to

unlock the doors and disarm the vehicle

security alarm (if equipped). Then, insert the key

into the ignition and place the ignition in the

ON/RUN position.

NOTE:



The ignition must be placed in the ON/RUN

position in order to drive the vehicle.



The message “Remote Start Active — Key To

Run” will display in the instrument cluster

display until you place the ignition in the

ON/RUN position.

General Information

The following regulatory statement applies to all

Radio Frequency (RF) devices equipped in this

vehicle:
This device complies with Part 15 of the FCC

Rules and with Innovation, Science and

Economic Development Canada license-exempt

RSS standard(s). Operation is subject to the

following two conditions:

1. This device may not cause harmful

interference, and

2. This device must accept any interference

received, including interference that may

cause undesired operation.

Le présent appareil est conforme aux CNR

d`Innovation, Science and Economic

Development applicables aux appareils radio

exempts de licence. L'exploitation est autorisée

aux deux conditions suivantes:

1. l'appareil ne doit pas produire de

brouillage, et

2. l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compro

mettre le fonctionnement.

La operación de este equipo está sujeta a las

siguientes dos condiciones:

1. es posible que este equipo o dispositivo no

cause interferencia perjudicial y

2. este equipo o dispositivo debe aceptar

cualquier interferencia, incluyendo la que

pueda causar su operación no deseada.

NOTE:

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

SENTRY KEY

The Sentry Key Immobilizer system prevents

unauthorized vehicle operation by disabling the

engine. The system does not need to be armed

or activated. Operation is automatic, regardless

of whether the vehicle is locked or unlocked.

GETTING TO KNOW YOUR VEHICLE

The system uses a key fob, keyless push button

ignition and a Radio Frequency (RF) receiver to

prevent unauthorized vehicle operation.

Therefore, only key fobs that are programmed

to the vehicle can be used to start and operate

the vehicle. The system cannot reprogram a key

fob obtained from another vehicle.
After placing the ignition switch in the ON/RUN

position, the vehicle security light will turn on for

three seconds for a bulb check. If the light

remains on after the bulb check, it indicates

that there is a problem with the electronics. In

addition, if the light begins to flash after the

bulb check, it indicates that someone

attempted to start the engine with an invalid key

fob. In the event that a valid key fob is used to

start the engine but there is an issue with the

vehicle electronics, the engine will start and

shut off after two seconds.
If the vehicle security light turns on during

normal vehicle operation (vehicle running for

longer than ten seconds), it indicates that there

is a fault in the electronics. Should this occur,

have the vehicle serviced as soon as possible by

an authorized dealer.

All of the key fobs provided with your new

vehicle have been programmed to the vehicle

electronics.

Key Programming

Key fob programming is performed at an

authorized dealer.

Replacement Keys

NOTE:

Only key fobs that are programmed to the

vehicle electronics can be used to start and

operate the vehicle. Once a key fob is

programmed to a vehicle, it cannot be

programmed to any other vehicle.

NOTE:

Duplication of key fobs may be performed at an

authorized dealer. This procedure consists of

programming a blank key fob to the vehicle

electronics. A blank key fob is one that has

never been programmed.

When having the Sentry Key Immobilizer

System serviced, bring all vehicle keys with you

to an authorized dealer.

General Information

The following regulatory statement applies to all

Radio Frequency (RF) devices equipped in this

vehicle:
This device complies with Part 15 of the FCC

Rules and with Innovation, Science and

Economic Development Canada license-exempt

RSS standard(s). Operation is subject to the

following two conditions:

1. This device may not cause harmful

interference, and

2. This device must accept any interference

received, including interference that may

cause undesired operation.

CAUTION!

The Sentry Key Immobilizer system is not

compatible with some aftermarket remote

starting systems. Use of these systems may

result in vehicle starting problems and loss of

security protection.

CAUTION!

Always remove the key fobs from the vehicle

and lock all doors when leaving the vehicle

unattended.

GETTING TO KNOW YOUR VEHICLE

Le présent appareil est conforme aux CNR

d`Innovation, Science and Economic

Development applicables aux appareils radio

exempts de licence. L'exploitation est autorisée

aux deux conditions suivantes:

1. l'appareil ne doit pas produire de

brouillage, et

2. l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compro

mettre le fonctionnement.

La operación de este equipo está sujeta a las

siguientes dos condiciones:

1. es posible que este equipo o dispositivo no

cause interferencia perjudicial y

2. este equipo o dispositivo debe aceptar

cualquier interferencia, incluyendo la que

pueda causar su operación no deseada.

NOTE:

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

VEHICLE SECURITY ALARM — IF EQUIPPED

The vehicle security alarm monitors the vehicle

doors for unauthorized entry and the ignition

switch for unauthorized operation. When the

alarm is activated, the interior switches for door

locks, power sliding doors and power liftgate

are disabled. The vehicle security alarm

provides both audible and visible signals.

If something triggers the alarm, the vehicle

security alarm will provide the following audible

and visible signals: the horn will pulse, the park

lamps and/or turn signals will flash, and the

vehicle security light in the instrument cluster

will flash.

Rearming Of The System

The vehicle security alarm will rearm itself after

the 15 additional minutes of the park lamps

and vehicle security light flashing, if the system

has not been disabled. If the condition which

initiated the alarm is still present, the system

will ignore that condition and monitor the

remaining doors and ignition.

To Arm The System

Follow these steps to arm the vehicle security

alarm:

1. Make sure the vehicle’s ignition is placed

in the OFF position (refer to "Starting The

Engine" in "Starting And Operating" for

further information).

2. Perform one of the following methods to

lock the vehicle:



Push lock on the interior power door lock

switch with the driver and/or passenger

door open.



Push the lock button on the key fob.

3. If any doors are open, close them.

To Disarm The System

The vehicle security alarm can be disarmed

using any of the following methods:



Push the unlock button on the key fob.



Cycle the vehicle ignition system out of the

OFF position. Insert a valid key into the igni

tion switch and place the ignition into the ON

position.

GETTING TO KNOW YOUR VEHICLE

(Continued)

NOTE:



The driver's door key cylinder and the liftgate

button on the key fob cannot arm or disarm

the vehicle security alarm.



The vehicle security alarm remains armed

during power liftgate entry. Pushing the lift

gate button will not disarm the vehicle secu

rity alarm. If someone enters the vehicle

through the liftgate and opens any door, the

alarm will sound.



When the vehicle security alarm is armed,

the interior power door lock switches will not

unlock the doors.

The vehicle security alarm is designed to protect

your vehicle. However, you can create

conditions where the system will give you a false

alarm. If one of the previously described arming

sequences has occurred, the vehicle security

alarm will arm regardless of whether you are in

the vehicle or not. If you remain in the vehicle

and open a door, the alarm will sound. If this

occurs, disarm the vehicle security alarm.

If the vehicle security alarm is armed and the

battery becomes disconnected, the vehicle

security alarm will remain armed when the

battery is reconnected; the exterior lights will

flash, and the horn will sound. If this occurs,

disarm the vehicle security alarm.

Tamper Alert

If something has triggered the vehicle security

alarm in your absence, the horn will sound three

times and the exterior lights will blink three

times when you disarm the vehicle security

alarm. Check the vehicle for tampering.

DOORS

Manual Door Locks

Lock the front doors by pushing down on the

lock knobs on each door trim panel.
If the lock knob is down when you shut either

front door, the door will lock. Make sure the

keys are not inside the vehicle before closing

the door.

Door Lock Knob

If the lock knob is rearward when you shut

either side sliding door, the door will lock. Make

sure the keys are not inside the vehicle before

closing the door.

WARNING!



Do not leave children or animals inside

parked vehicles in hot weather. Interior

heat build-up may cause serious injury or

death.



For personal security and safety in the

event of an collision, lock the vehicle doors

as you drive as well as when you park and

leave the vehicle.

GETTING TO KNOW YOUR VEHICLE

(Continued)

Power Door Locks — If Equipped

Power door lock switches are located on each

front door trim panel. Use these switches to lock

or unlock the doors.

Driver Power Door Lock Switches

If you push the power door lock switch while the

key fob is in the ignition, and any front door is

open, the power locks will not operate. This

prevents you from accidentally locking your

keys in the vehicle. Removing the key fob or

closing the door will allow the locks to operate.

A chime will sound if the key fob is in the ignition

switch and a door is open, as a reminder to

remove the key fob.

NOTE:

If you push the power door lock switch while the

sliding door is open, the sliding door will lock.

Automatic Door Locks — If Equipped

The auto door lock feature default condition is

enabled. When enabled, the door locks will lock

automatically when the vehicle's speed exceeds

15 mph (24 km/h). The auto door lock feature

can be enabled or disabled by your authorized

dealer per written request of the customer.

Please see an authorized dealer for service.



Before exiting a vehicle, always shift the

automatic transmission into PARK or the

manual transmission into FIRST gear or

REVERSE, apply the parking brake, turn the

vehicle OFF, remove the key fobs from

vehicle, and lock all doors. and lock your

vehicle.



Never leave children alone in a vehicle, or

with access to an unlocked vehicle. Leaving

children in a vehicle unattended is

dangerous for a number of reasons. A child

or others could be seriously or fatally

injured. Children should be warned not to

touch the parking brake, brake pedal or the

gear selector.



Allowing children to be in a vehicle unat

tended is dangerous for a number of

reasons. A child or others could be seriously

or fatally injured. Children should be

warned not to touch the parking brake,

brake pedal or the gear selector.

WARNING!

(Continued)



Do not leave the key fob in or near the

vehicle, or in a location accessible to chil

dren. A child could operate power windows,

other controls, or move the vehicle.

WARNING!

(Continued)

GETTING TO KNOW YOUR VEHICLE

Unlock Doors Automatically On Exit — If

Equipped

The Unlock Doors Automatically On Exit feature

unlocks all of the vehicle doors when any door

is opened. This will occur only after the gear

selector has been placed into the PARK

position, after the vehicle has been driven (the

gear selector has been placed out of the PARK

position and all doors closed).
The Unlock Doors Automatically On Exit feature

will not operate if there is any manual operation

of the power door locks (lock or unlock).
On vehicles equipped with the optional

instrument cluster display, refer to “Instrument

Cluster Display” in “Getting To Know Your

Instrument Panel” for further information.

NOTE:

Use the Automatic Door Locks at 15 mph

(24 km/h) and Unlock Doors Automatically On

Exit features in accordance with local laws.

Power Sliding Side Door — If Equipped

Push the button on the key fob twice

within five seconds to open, close, or

reverse a power sliding door.

The power sliding door may be power opened or

closed in several ways:



Key fob



Inside or outside handles



Buttons located:



In the overhead console



Just inside the sliding door



On the outside handle

Push the button on the key fob twice within five

seconds to open a power sliding door. When the

door is fully open, pushing the button twice

within five seconds a second time will close the

door.
There are power sliding side door switches

located on the B-pillar trim panel, just in front of

the power sliding door for the rear seat

passengers and in the overhead console for the

driver and passengers. Pushing the switch once

will open the power sliding door. If the switch is

pushed while the door is under a power cycle,

the door will reverse direction.

NOTE:

The power sliding side door must be unlocked

before the power sliding door switches will

operate.

Power Sliding Door Switch

If the inside or outside door handles are used

while the power sliding side door is activated,

the power sliding door feature will be canceled

and will go into manual mode.
To avoid unintentional operation of the power

sliding doors from the rear seats, push the

power sliding door master lock button, located

in the overhead console, to disable the switches

and handles for the rear seat passengers.

GETTING TO KNOW YOUR VEHICLE

NOTE:



The power sliding side door switches will not

open the power sliding door if the gear

selector is in gear or the vehicle speed is

above 0 mph (0 km/h). To close the power

sliding door with the gear selector in gear and

vehicle speed at 0 mph (0 km/h), the brake

must be pushed.



If anything obstructs the power sliding side

door while it is closing or opening, the door

will automatically reverse to the closed or

open position, provided it meets sufficient

resistance.



If the power sliding side door is not in the full

open or close position, it will fully open when

a power sliding door switch is pushed. To

close the door, wait until it is fully open and

then push the switch again.



If the power sliding door encounters multiple

obstructions within the same cycle, the

system will automatically stop, the power

sliding door motor will make a clicking sound

until the door has no further movement. This

clicking sound can be stopped by pulling the

inside or outside handle. If this condition

occurs, no damage is done to the power

sliding door motor. The power sliding door

must be opened or closed manually.

Overhead Console Control Buttons

Child Locks

To provide a safer environment for small

children riding in the rear seats, the sliding

doors are equipped with a Child Protection Door

Lock system.

NOTE:

When the Child Protection Door Lock System is

engaged, the door can only be opened by using

the outside door handle even though the inside

lock is in the unlocked position.

Child Protection Door Locks

WARNING!

You, or others, could be injured if caught in

the path of the sliding door. Make sure the

door path is clear before closing the door.

1 — Left Sliding Door
2 — Liftgate
3 — Right Sliding Door
4 — Sliding Door Power Off

GETTING TO KNOW YOUR VEHICLE

(Continued)

SEATS

Seats are a part of the Occupant Restraint

System of the vehicle.

Manual Adjustment (Front Seats) — If

Equipped

Manual Front/Second Row Seat Adjuster

Both front seats are adjustable forward or

rearward. The manual seat adjustment handle

is located under the seat cushion at the front

edge of each seat.

Manual Seat Adjuster

While sitting in the seat, pull up on the handle

and slide the seat forward or rearward. Release

the bar once you have reached the desired

position. Then, using body pressure, move

forward and rearward on the seat to be sure

that the seat adjusters have latched.

WARNING!



It is dangerous to ride in a cargo area,

inside or outside of a vehicle. In a collision,

people riding in these areas are more likely

to be seriously injured or killed.



Do not allow people to ride in any area of

your vehicle that is not equipped with seats

and seat belts. In a collision, people riding

in these areas are more likely to be seri

ously injured or killed.



Be sure everyone in your vehicle is in a seat

and using a seat belt properly.

WARNING!



Adjusting a seat while the vehicle is moving

is dangerous. The sudden movement of the

seat could cause you to lose control. The

seat belt might not be adjusted properly

and you could be injured. Adjust the seat

only while the vehicle is parked.



Do not ride with the seatback reclined so

that the shoulder belt is no longer resting

against your chest. In a collision you could

slide under the seat belt and be seriously or

even fatally injured. Use the recliner only

when the vehicle is parked.

WARNING!



Adjusting a seat while driving may be

dangerous. Moving a seat while driving could

result in loss of control which could cause a

collision and serious injury or death.

GETTING TO KNOW YOUR VEHICLE

Manual Reclining Seats — If Equipped

For models equipped with manual reclining

seats, the recline lever is located on the

outboard side of the seat.

Manual Recline Lever

To recline, lean forward slightly, lift the lever,

then push back to the desired position and

release the lever. Lean forward and lift the lever

to return the seatback to its normal position.

Using body pressure, lean forward and rearward

on the seat to be sure the seatback has latched.

Manual Adjustment (Rear Seats)

Stow 'n Go Seating

On vehicles equipped with Stow 'n Go seating,

the second and third row seats can be folded

into the floor for convenient storage.

Second Row Stow 'n Go
On vehicles equipped with Stow 'n Go seats, the

seats will fold and tumble in one motion.
To stow the second row seats, proceed as

follows:

1. Move the front seat fully forward.

2. Recline the front seatback fully forward.

3. Raise the armrests on the second row seat.

NOTE:

Seat will not stow in the storage bin unless the

armrests are raised.



Seats should be adjusted before fastening

the seat belts and while the vehicle is

parked. Serious injury or death could result

from a poorly adjusted seat belt.

WARNING!

(Continued)

WARNING!

Do not ride with the seatback reclined so that

the shoulder belt is no longer resting against

your chest. In a collision you could slide under

the seat belt, which could result in serious

injury or death.

WARNING!

Do not pile luggage or cargo higher than the

top of the seatback. This could impair

visibility or become a dangerous projectile in

a sudden stop or collision.

GETTING TO KNOW YOUR VEHICLE

4. Slide the storage bin locking mechanism to

the “lock” position and then pull up on the

storage bin latch to open the cover.

Storage Bin Cover Lock Release

5. Pull upward on the seatback recliner lever

located on the outboard side of the seat.

Seatback Recliner Lever, Seat Tumble, And Head

Restraint Fold Lever

The non-adjustable head restraint and seat

back will fold automatically during the seat

tumble. No additional actuation is

necessary.

Non-Adjustable Head Restraint

Automatic Folding Seatback

The seat will automatically tumble into posi

tion for easy storage.

Tumbled Second Row Seat

NOTE:

You may experience deformation in the seat

cushion from the seat belt buckles if the seats

are left folded for an extended period of time.

This is normal and by simply opening the seats

to the open position, over time the seat cushion

will return to its normal shape.

Dodge Grand Caravan (2020 year). Manual in english - page 1