|
|
Content .. 1363 1364 1365 1366 ..
CAUTION: DO NOT use a number stamp or a punch to mark connecting rods or caps, as damage to con- NOTE: Connecting rods and bearing caps are not 4. Mark connecting rod and bearing cap positions using a permanent ink marker or scribe tool. CAUTION: Care must be taken not to damage the 5. Remove connecting rod cap. Install Special Tool 8507 Connecting Rod Guides into the connecting rod being removed. Remove piston from cylinder bore. Repeat this procedure for each piston being removed. CAUTION: Care must be taken not to nick crankshaft journals, as engine damage may occur 6. Immediately after piston and connecting rod removal, install bearing cap on the mating connecting rod to prevent damage to the fractured cap and rod surfaces. 7. Carefully remove piston rings from piston(s), starting from the top ring down. 9 - 2382 ENGINE - 5.7L - SERVICE INFORMATION DR/DH |