|
|
Remove or install starter. Remove or install lower bell housing bolts. Carefully work transaxle and torque converter as- sembly rearward off engine block dowels and disen- gage converter hub from end of crankshaft. Attach a When installing transaxle, reverse the above proce- dure. If torque converter was removed from transaxle be sure to align pump inner gear pilot flats with torque Adjust gearshift and throttle cables. t ATF PLUS (Auto- matic Transmission Fluid) Type 7176. DISASSEMBLY SUBASSEMBLY REMOVAL Prior to removing any transaxle subassemblies, plug all openings and thoroughly clean exterior of Fig. 7 Remove or Install Engine Mount Bracket from Front Crossmember Fig. 8 Remove or Install Front Mount Insulator Through-Bolt and Bell Housing Bolts Fig. 9 Positioning Transmission Jack Fig. 10 Remove or Install Left Engine Mount Fig. 11 Remove or Install Left Engine Mount from Engine 21 - 50 TRANSAXLE Ä |