Content .. 356 357 358 359 ..

DAF 95XF. Manual - part 358

MODIFICATIONS TO THE ELECTRICAL INSTALLATION

Modifications to the electrical installation from chassis number 0E477514

4-44

1316630/24-29

EL000379

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

257

258

260

262

263

264

265

4099

3039

3402

3039

9029

1247

4693

4691

4692

1248

1247

4693

4691

4692

4691

4692

4099

4691

4693

1297

1234

3402

1297

1234

3402

1234

3402

4100

1297

13/403

11/403

27/402

D878

1010

1000

1010

1000

E143

15A

E194

E184

1248

1247

G126

398

C776

18/

295

21/

295

22/

295

D814

32/

295

34/

295

15/

295

33/

295

F000

B501

297

25/402

297

23/400

G328

G321

A046

2/534

8/534

5/534

4/534

6/534

3/534

1/534

7/534

ǹ 0209

Modifications to the electrical installation from chassis number 0E477514

MODIFICATIONS TO THE ELECTRICAL INSTALLATION

4-45

43. CONNECTOR SOCKETS FA, DIAGNOSTIC CONNECTOR, ALARM

CONNECTOR

DIAGNOSTIC CONNECTOR (A021)
The diagnostic connector is installed on the top
left-hand side in the central cabinet. This is the
connector to which DAVIE is connected. After
the contact has been activated, the supply
voltage for DAVIE is applied to pin 1 through
fuse E053. Pin 2 is connected to earth. The
remaining pins are meant for the communication
with various systems and are connected to
those systems.

Pin no.

Wire no.

Colour

Description

1229

red

Supply for DAVIE

9107

white

Earth

3425

blue

ABS/ASC-D

4788

black

ASL-G

4697

black

ECAS remote control, E-gas 3

6
7

4732

black

ECAS 2

8
9

4047

black

CTE-3

10
11

4883

black

ZF intarder

12
13

3470

blue

AGS

3037

blue

D3LC auxiliary heating

24V CONNECTOR (A007)
This 24V connector is located on the right--hand
side, along the air vents of the heater (central
console).
Pin 1

of the 24V connector (A007) is
connected directly to the supply
voltage through wire 1000 and fuse
E036.

Pin 2

is connected to earth.

ABS CONNECTOR (A004)
This ABS connector is installed in the back cross
member of the chassis.
Pin 1

of the ABS connector (A004) is
connected directly to the supply
voltage through wire 1119 and fuse
E043.

Pin 2

is connected directly to the supply
voltage through fuse E040 behind the
contact. This voltage also serves to
feed the ABS unit.

Pins 3,4

are both connected to earth.

Pin 5

is connected to the CWS--2 unit
(D582) through wire 3428.

ǹ 0209

MODIFICATIONS TO THE ELECTRICAL INSTALLATION

Modifications to the electrical installation from chassis number 0E477514

4-46

FA TRAILER CONNECTOR (7--pin) (A000)
This FA trailer connector is installed in the back
cross member of the chassis.
Pin 1

of the FA trailer connector (A000) is
connected to earth.
If a connection is made between
contacts 2 and 1 (rear/side marker and
parking lights position) with the lighting
switch (C622), a voltage is applied to
contact 85 of relay G000 through fuse
E084, wire 1101, switch C622 and wire
2100. The relay is activated and a
voltage is applied from wire 1000,
contacts 30 and 87 (from relay G000)
through fuses E000 and E001 to pins 2
(through wire 2102) and 6 (through wire
2103) respectively.

Pin 2

switches the left--hand rear light.

Pin 3

is connected to the CTE--3 unit (2/232)
(left direction) through wire 2008.

Pin 4

is connected to relay G036 (brake--light
relay) through wire 4601.

Pin 5

is connected to the CTE--3 unit
(30/232) (right direction) through wire
2009.

Pin 6

switches the right--hand rear light.

REAR FOG LIGHT / BACK--UP LIGHT
CONNECTOR (7--pin) (A001)
This connector is installed in the back cross
member of the chassis.
Pin 1

is connected to earth.

Pin 3

is connected to the supply voltage once
the contact has been activated and the
gearbox is in reverse gear. The voltage
is applied as follows: through fuse
E016 (wire 1217), back--up switch
E501 (wire 4591) to pin 3.

Pin 5

is connected directly to the supply
voltage through fuse E048 and wire
1113. Pin 3 is also connected to
connector A026 (superstructure
side--lights, 4--pin).

Pin 7

(rear fog lights) is connected to the
supply voltage through fuse E010, relay
G005 and wire 2152.

ǹ 0209

Modifications to the electrical installation from chassis number 0E477514

MODIFICATIONS TO THE ELECTRICAL INSTALLATION

4-47

ALARM SYSTEM SOCKET (A033)
The alarm system socket is located at the front,
below the central printed circuit in the cable
harness.
Pin 1

is connected directly to the supply
voltage in front of the contact through
wire 1114 and fuse E108 (wire 1000).

Pin 2

is connected to the direction indicator,
front left (C014), side direction
indicator, left (C016), direction indicator,
rear left (C018) and the electronic unit
CTE-3 (D884) (4/232) through wire
2006.

Pin 3

is connected to the direction indicator,
front right (C015), side direction
indicator, right (C017), direction
indicator, rear right (C019) and the
electronic unit CTE-3 (D884) (31/232)
through wire 2007.

Pin 4

is connected directly to the control
switch for interior stepwell lighting, door
switch on driver’s side (E514), the
stepwell lighting on driver’s side
(C062), the electronic unit CTE-3
(D884) and the lighting buzzer relay
(G235) through wire 2600.

Pin 5

is connected directly to the stepwell
lighting on co--driver’s side (C063), the
interior lighting switch on co--driver’s
side (C120), the control switch for
interior stepwell lighting, door switch on
co--driver’s side (E515) through wire
2609, and the interior--lighting diode
prevent feedback to the co--driver’s
stepwell (D704).

Pin 6

is connected directly to the cab--lock
control switch (F009) through wire 3412
and to the electronic unit CWS (D582)
(20/215).

Pin 7

is connected directly to the generator of
integrated voltage regulator (A502)
(D+) and to lighting relay D+ (G107)
through wire 1020. At the same time
pin 7 is connected directly to the
lighting buzzer (B242) and to the
electronic unit CWS (D582) (12/214).

Pin 8

is connected to earth.

Pin 9

is not connected.

ǹ 0209

Content .. 356 357 358 359 ..