Citroen Xsara Picasso (2005 year). Instruction - part 10

 

  Index      Citroen     Citroen Xsara Picasso - instruction 2005 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  8  9  10 

 

 

 

Citroen Xsara Picasso (2005 year). Instruction - part 10

 

 

25

A D J U S T I N G   T H E   A U D I O   S Y S T E M

VOLUME CONTROL

Turn button (A) to increase or decrease the volume.
The display reads “VOLUME” followed by the volume level selected.
The volume can also be adjusted using buttons (4) and (6) on the control at the steering wheel (P).

Note :
-  The volume level selected before the system was turned off will be the one that is automatically selected when the 

system is turned on again.

-  The volume is automatically adjusted according to the vehicle speed.

SOUND PAUSE (MUTE)

Give a long and simultaneous press on both buttons (4) and (6) on the control at the steering wheel (P) to activate this 
function.
The audio output will be interrupted regardless of the mode selected.
The display indicates “MUTE”.
To restore the audio output, press one of the buttons on the control at the steering wheel.

SOUND ADJUSTMENT

Press successively on button (N) to view on the display the bass, treble, loudness, fader (front/rear sound distribution) 
and balance (left/right sound distribution) functions, followed by the current adjustment.
Press buttons (L) or (M) to modify the values of the function displayed.

Note :
-  If the system is left for several seconds, it will return to the normal display mode.
-  The bass and treble levels can be adjusted and memorised separately for the different modes.

AUTOMATIC VOLUME ADJUSTMENT FUNCTION

This function automatically adjusts the audio system volume according to the vehicle speed.
To have this function activated or disactivated, consult your CITROËN Dealer.

26

R A D I O   M O D E

RADIO RECEPTION

Your audio system will be subject to certain phenomena that are not encountered by domestic systems. The reception 
of AM and FM signals is subject to interference which is caused by the nature and propagation of the signals, and is 
not a fault of your audio system.
In  AM  mode,  the  reception  may  be  affected  when  passing  under  power  lines  or  bridges,  or  when  travelling  through 
tunnels.
In FM mode, the reception may be affected by the distance from the station transmitter, the refl ecting of signals off 
obstacles (mountains, hills, tower blocks) and radio blackspots (no coverage from the station transmitter).

SELECTING RADIO MODE

If the system is not already in radio mode, press button (I).

SELECTING A WAVEBAND AND MEMORY BANK

Press button (D), to go through the memory banks FM1, FM2 and FM3, for the FM waveband, and the memory bank 
MW/LW, for the AM waveband.

AUTOMATIC SEARCH (Automatic search mode activated)

Press either button (G) or (E) briefl y to tune into the following or preceding radio stations respectively, within the chosen 
waveband.
By keeping either button (G) or (E) pressed down, the search mode will proceed through the waveband and will stop at 
the fi rst station it comes across once the button is released.
The automatic search mode can also be operated using buttons (2) and (3) on the control at the steering wheel (P).
It is possible to carry out a manual search to fi nd a known station if the automatic search is unable to tune into it (for 
example, due to very weak reception).

MANUAL SEARCH (Manual search mode activated)

To select the manual search mode, briefl y press the button “MAN” (F).
The display indicates “MN” followed by the frequency.
By keeping either button (G) or (E) pressed down, the search mode will proceed through the waveband and will stop on 
the frequency shown on the display when the button is released. The system will remain on the frequency displayed.
The system will automatically return to the automatic search mode after several seconds, or by pressing the button 
“MAN” (F).

TUNING SENSITIVITY

Automatic searches can be carried out according to two levels of sensitivity.
The searches are fi rst carried out for the local sensitivity function “LO”, then the distance sensitivity function “DX”.

27

R A D I O   M O D E

MANUAL PRE-SETTING

Select the waveband and memory bank required using button (D).
Select a station using either the automatic or manual search modes.
Press and hold down one of buttons “1” to “6” (O) for more than two seconds.
The sound momentarily cuts off, then returns to its previous level to confi rm that it has memorised the station.
The audio system can memorise:

-  18 FM radio stations on 3 memory banks (FM1, FM2, FM3),
-  6 AM radio stations on 1 memory bank.

FM AUTOMATIC PRE-SETTING (AUTOSTORE FUNCTION)

It is possible to memorise the 6 strongest FM radio stations on the FM3 memory bank by holding down the button (D)
for more than two seconds.
The display indicates “FM AST”.

-  The 6 strongest radio stations are memorised, wiping the previous 6 strongest.
-  Once the stations have been memorised, the fi rst pre-set station on the FM3 memory bank is automatically selected.

Note :
-  If the traffi c information function has been activated (see RDS SYSTEM), the radio stations using RDS will be memo-

rised fi rst. If it is unable to memorise any new stations, the system will retain the previous memorised stations.

-  If the system is unable to fi nd 6 stations, the unfi lled memory slots will remain free.

RECALLING PRE-SET STATIONS

Press the button (D) briefl y to select the required waveband and memory bank.
Select the desired pre-set radio station by pressing the relevant button “1” to “6” (O).
If a RDS station is selected, the station’s frequency will appear on the display a few seconds before the station’s name.
Recalling a RDS station may lead to the system automatically re-tuning to the frequency on which the best reception 
can be obtained according to the area in which you are travelling (see RDS SYSTEM).
This operation can also be performed using button (1) on the control at the steering wheel (P).

28

R D S   S Y S T E M

USING THE RDS (RADIO DATA SYSTEM) FUNCTION ON FM 
WHAT IS THE RDS SYSTEM?

The RDS system provides access to various functions described in this chapter, the main one of which allows you to 
keep listening to the same radio station by automatically selecting the frequency on which the best reception can be 
obtained according to the area in which you are travelling.

SCANNING FOR RDS TRANSMISSIONS

The system searches for and retains the best possible reception for a selected radio station.
The system continually checks for any other frequencies on which the selected radio station is broadcast, and auto-
matically chooses that offering the best reception.
Press the “RDS” button (B).
If the station you have selected does not broadcast on several frequencies in the area in which you are travelling, it is 
possible to deactivate the automatic RDS transmission scanning function.
Press the “RDS” button (B) again in order to deactivate the function.

Note :
-  If the station received carries RDS with the RDS transmission scanning function, then the “RDS” indicator will come 

on with the “NAME” of the radio station shown on the display.

-  If  the  station  received  carries  RDS  without  the  RDS  transmission  scanning  function,  then  the  “RDS”  indicator  will 

fl ash with the “NAME” of the radio station shown on the display.

-  If the station received does not carry RDS, the “RDS” indicator will fl ash continually. The display will only show the 

station frequency.

-  The “RDS” indicator will remain off if the RDS search function is deactivated. The display will either show the “NAME” 

of any stations carrying RDS, or the frequency of those without.

REGIONAL SEARCH MODE

Some national radio networks broadcast regional programmes at certain times of the day.
It is possible to either :

-  search for the regional station only.
-  search across the whole network in order to fi nd a different programme.

Press the button “RDS” (B), for more than two seconds in order to activate or deactivate the function.

Note :
-  When the function has been activated, the system will remain tuned to one specifi c regional station.
-  When the function has been deactivated, the system will select the regional station with the strongest signal.

29

R D S   S Y S T E M

TRAFFIC INFORMATION

Your system allows you to receive traffi c information broadcasts even while listening to another audio source.
Press the “TA” button (C).
While a traffi c information message is being broadcast :

-  The radio or cassette makes a pause. 

Once the message has been broadcast, the system will revert to its original mode.

Note :
-  When searching for or automatically pre-setting stations, with the “TA” function active, those stations which offer the 

traffi c information service will be found or memorised fi rst.

TRAFFIC INFORMATION VOLUME CONTROL

The traffi c information volume operates separately from that of the rest of the system, and can be adjusted independently. 
Adjust by turning button (A) while a traffi c information message is being broadcast. 
This new volume level is now memorised.

30

C A S S E T T E   M O D E

SELECTING CASSETTE MODE

Playback starts automatically upon insertion of a cassette.
To manually select the cassette mode (if a cassette is already inserted in the player), press button (I).
These operations can also be performed using button (5) on the control at the steering wheel (P).

EJECTING THE CASSETTE

Press buttons (J) and (K) down fully and at the same time to eject the cassette. The audio system will automatically 
switch to radio mode.

DIRECTION OF PLAYBACK

At the end of a side, the player will automatically switch direction to play the other side of the cassette.
To reverse the direction of play before the end of the cassette, push buttons (J) and (K) down half-way at the same time.

FAST FORWARD AND REWIND

Press either button (J) or button (K) so that it locks down, in order to rewind or fast forward the cassette respectively.
To halt the fast forward or rewind, press the other button.
These operations can also be performed using buttons (2) and (3) on the control at the steering wheel (P).

31

T E C H N I C A L   S P E C I F I C AT I O N S *

PRESENTATION

• 3 wavebands (MW/LW/FM).

• Remote control on steering wheel with 8 functions.

• Night lighting.

AUDIO SYSTEM

• Max. power 4x10 Watts.

• Notched volume control.

• Front/Rear & Right/Left balance control.
• Loudness.
• Separate treble/bass adjustment.
• Automatic volume adjustment.

TUNER

• RDS Eon PTY (News).

• Independent RDS search and display of station name.

• Traffi c information button (TA).
• 24 pre-sets (18 FM - 6 MW/LW).
• Automatic memorisation of strongest stations (AST).

CD PLAYER

• Random track play.

CASSETTE PLAYER

• Auto-reverse.

• Lockable fast forward and rewind.

PROTECTION

• Lockable fast forward and rewind.

RDS-EON (Enhanced Other Networks) System

•  This is a service which links stations providing information in a common network. If you are tuned to a station in this 

network which does not itself transmit traffi c information or suchlike, EON allows this type of information to be received 
via  another  station  in  the  network  (the  radio  will  automatically  select  the  fi rst  station  of  this  network  to  transmit  the 
information).

* According to version or option.

 

 

 

 

 

 

 

Content   ..  8  9  10