Chery B11. Manual - part 10

Audio System

41

track ,or back to the beginning of current

track by using APC function.

Ÿ

Skip to next track (FF APC)

Press 8 (9) for two times when tape

is playing, the tape will fast forward

to the next programme and start next

track

Ÿ

Skip back to the beginning of current

track (REW APC)

Press 7 (7) for two times when tape

is playing, the tape will fast rewind

and start current track.

Ÿ

Cancel FF/REW APC

 restart to

play

Press PAUSE (8)

The tape player will stop APC mode

automatically when the tape is at the

beginning of next track (FF APC) or

current track (REW APC)

The function is called “monitor mode”

Dolby Noise Reduction System

Dolby B Noise Reduction System enhance

the volume balance for high frequency

signal during tape play.   And the volume

can be reset to original volume. Dolby B

Noise Reduction System decrease the

hoarse noise which is  common

phenomenon for tapes.

Dolby B Noise Reduction System is

certificated by Dolby lab. Dolby and

double-D symbol is the registration brand

of Dolby lab licence Co., ltd.

1.Press Dolby NR (18) to select Dolby

mode. Press Dolby NR every one time,

mode will be switched according to below

sequence.

Dolby  B  NR  ON 

Dolby  NR  OFF 

Dolby  B  NR  ON

2.Select Dolby B NR ON, the display

show “B NR”.

Track beginning scan

Track beginning scan function scan and

play the beginning 10 seconds for all

tracks on the tape.

This function will continue automatically,

till it is cancelled out.

Audio System

42

1.Press SCN (16) to start track beginning

scan. The display show “SCN”.

2.Press SCN (16) again to cancel track

beginning scan function. “SCN” disappear

from the display, and continue to play

current track.

Ÿ

When track beginning scan

function works, the tape player

will use the auto-reverse

feature if it reaches the end and

continue track beginning scan,

the display show “SCN”.

Ÿ

If you switch to other mode

during track beginning scan,

the tape player will stop this

function automatically, when

scanning to next track (APC

function).

Repeat play

Repeat function can replay the current

track. The function will continue

automatically, till it is cancelled out.

1.Press RPT (14), the indicator light of

“RPT” on display is on, the tape player

will repeat current track.

2.Press RPT (14) again to cancel repeat

function. “RPT” disappears from the

display,  the tape player switch back to

normal mode.

Blank skip

Blank skip function can skip the blanks

longer than 12 seconds on the tape.

1.Press RDM (15), the indicator light of

“BLS” on display is on, the tape player

fast forward to the beginning of next track.

2.Press RDM (15), cancel blank skip

function. “BLS” will disappear from the

display, the tape player switch back to

normal mode.

Attention:

Below tapes may have problems to play

APC, track beginning scan, repeat and

blank skip function:

Ÿ

Tapes with low volume

Ÿ

Tapes with big cacophony between

tracks

Ÿ

Tapes with long pause between

tracks

Audio System

43

Ÿ

Tapes with blanks shorter than 4

seconds between tracks.

Other advantageous function

Clock setting

1.Press DISP (1) switch to adjustment

display.

2.Press DISP (1) and M4 (17) for more

than one second at the same time, “1:00”

display starts to flash.

3.Press 7

7

 or 8 (9) select hour or

minute.

Ÿ

Use 24 hours display mode.

4.Press DISP (1) save time in memory.

5.Press DISP (1) switch back to former

mode.

Attention

You can NOT set clock during starting the

engine. The clock will go back to default

when the battery is used up or discharged,

or this appliance is discharged.

Hand free function for mobile
phone (Presetting configuration)

1.When calls received by the mobile, LCD

display will immediately show “TEL”

automatically and the audio source will

immediate switch to mobile calling mode

automatically.

2.The user can use MIC to talk to the

caller, and the sound of caller will be

heard from the audio source’s left

loudhailer.

3.After the call finished, the audio source

(display) will switch back to former play

mode.

Audio System

44

Operation for accessories

CD changer

CD changer is located at the right side of

the trunk.

CD box

Insert CD

The CD box can insert 6 CDs maximum,

the No.1 CD channel is on the top, and

No.6 CD channel is on the bottom, others

are in sequence.

Changer

box

Eject button

Box cover