BMW 135i Convertible (2013 year). Manual in english - page 7

 

  Index      Manuals     BMW 135i Convertible (2013 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     5      6      7      8     ..

 

 

 

BMW 135i Convertible (2013 year). Manual in english - page 7

 

 

Destination entry Navigation
Depending on the entry, up to 20 towns/
Planning a trip with
cities may be suggested.
intermediate destinations
5. Select a location:
> To select a recommended town/city:
New trip
{Yes}
A trip can be planned using intermediate
> To select other town/city: {New
destinations.
entry}
1. "Navigation"
> To select an entry, e.g. {Entry …}
2. "Map"
> To spell an entry: {Spell city}
3. Move the controller to the left, if necessary.
6. Continue making the entry as prompted by
4.
"Guidance"
the system.
5. "Enter new destination"
If there are several towns/cities with the same
6. Select the type of destination entry.
name:
Towns/cities that sound the same are compiled
in a separate list and are displayed as one town/
city followed by three dots.
1. Select an entry:
{Yes} or {Entry …} e.g. entry 2.
2. Select the desired town/city.
The town/city can also be selected from the list
via iDrive: turn the controller until the town/city
7. Enter the intermediate destination.
is selected and press the controller.
8. "Start guidance"
Entering a street or intersection
Entering intermediate destinations
The street or intersection is entered in the same
manner as the town/city.
A maximum of 30 intermediate destinations can
be entered for one trip.
Entering a house number
1. "Enter new destination"
Depending on the data in the navigation sys-
2. Select the type of destination entry.
tem, house numbers up to the number 2,000
3. Enter the intermediate destination.
can be entered:
4. "Add as another destination"
1.
{House number}
The intermediate destination is inserted
2. Say the house number.
into the destination list and highlighted.
Say each digit separately.
5. Turn the controller until the intermediate
3. Continue making the entry as prompted
destination is at the desired place in the list.
by the system.
6. Press the controller.
Starting destination guidance
{Start guidance}
Destination guidance starts immediately.
141
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Navigation Destination entry
Starting the trip
Options for intermediate destinations
After entering all intermediate destinations,
1. "Map"
highlight the first destination and say "Start
2.
"Guidance"
guidance"
3. "Display all trip destinations"
For example if the second destination is high-
4. Select an intermediate destination.
lighted at the start of route guidance, then the
first destination is skipped over.
> "Edit destination"
The symbol indicates the active intermedi-
> "Reposition dest. in the trip": move the
ate destination.
intermediate destination within the list.
> "Delete dest. in the trip"
Storing a trip
> "Go to next dest. in the trip"
Up to 30 trips can be stored in the trip list.
Some options are not possible for some trips.
Delete existing trips as necessary to permit you
to store new trips.
Deleting a stored trip
1. Open "Options".
1. "Navigation"
2. "Store trip"
2. "Stored trips"
3. Enter a name.
3. Select the desired trip.
4. "OK"
4. Open "Options".
The trip is stored in the trip list under the
5. "Delete all trips" or "Delete trip".
entered name.
Selecting last trip
Selecting a stored trip
1. "Navigation"
1. "Navigation"
2. "Stored trips"
2. "Stored trips"
3. "Last trip"
3. Select the desired trip.
4.
"Start guidance"
4. "Start guidance"
Trips, changing
Changing the trip direction
Intermediate destinations are displayed in
reverse order in the list.
1. "Map"
2.
"Guidance"
3. Open "Options".
4. "Reverse order of trip dest."
142
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Destination guidance Navigation
Destination guidance
Vehicle equipment
Route criteria
In this chapter, all production, country, and
General information
optional equipment that is offered in the model
> You can influence the calculated route by
range is described. Equipment is also described
selecting certain trip criteria.
that is not available because of, for example,
selected options or country version. This also
> Route criteria can be changed during desti-
applies to safety related functions and systems.
nation entry and during route guidance.
> Street types are part of the navigation data
and are taken into account in route plan-
Starting destination
ning, e.g. avoiding highways.
guidance
> The proposed route can differ from
personal experience.
1. "Navigation"
> The settings are stored for the remote
2. Entering a destination, refer to page 134.
control currently in use.
3. "Accept destination"
> Route guidance with traffic bulletins, refer
4. "Start guidance"
to page 149.
The route is displayed on the Control Display
after it is calculated.
Changing route criteria
In the map view, the distance to the destination/
1.
"Navigation"
intermediate destination and the estimated
2.
"Map"
time of arrival are displayed.
3.
"Route preference"
The arrow display appears on the Control
4.
Selecting a criterion:
Display, if so desired.
> "Fast route": time-optimized route
through a combination of the least pos-
sible distance and stretches of road that
Terminating destination
allow rapid driving.
guidance
> "ECO PRO route": optimized
1. "Navigation"
combination of the fastest and shortest
2. "Map"
possible route.
3.
"Guidance".
> "Short route": short distance without
taking time into account.
4. "Stop guidance"
> "Alternative routes": are suggested,
where possible, during active route
Continuing destination
guidance.
The individual suggestions are labeled in
guidance
color.
If the destination was not reached during the
last trip, destination guidance can be resumed.
"Resume guidance"
143
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Navigation Destination guidance
Lane information
In the arrow display, the recommended lanes
of multi-lane roads are each marked with a
triangle.
> Filled triangle: optimum lane.
> Empty triangle: likewise possible lane. It
can, however, also be possible to briefly
make additional lane changes.
5. Select additional route criteria, if desired.
Displaying the list of route segments
Where possible, the selected criteria will be
If the route guidance has been started, then you
avoided on the route.
can display a list of route segments. The dis-
> "Avoid highways": highways are avoided
tance to be traveled and traffic bulletins are
where possible.
displayed for each segment of the route.
> "Avoid toll roads": toll roads are avoided
1. "Navigation"
where possible.
2. "Route information"
> "Avoid ferries": ferries are avoided
3. Highlight the route segment.
where possible.
The route segment is displayed in the preview
The setting applies to the current route and to
map.
the planning of future routes.
Bypassing a section of the route
Route
During route guidance, prompt the navigation
system to bypass certain route segments. In
General information
doing so, you will specify how many kilometers
Depending on your vehicle's equipment, vari-
to travel before returning to the original route.
ous views of the route are available during route
1.
"Navigation"
guidance:
2.
"Route information"
> Arrow display on the Control Display.
3.
"New route for"
> List of route segments.
> Map view, refer to page 145.
Arrow display
The following information is displayed during
route guidance:
> Large arrow: current direction of travel.
> Small arrow: indicates the next change of
direction.
> Intersection view.
4.
Turn the controller: enter the desired
> Lane information.
mileage.
> Traffic bulletins.
5.
Press the controller.
> Distance to the next change of direction.
> Street name of the next change of direction.
144
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Destination guidance Navigation
Resuming the original route
Repeating a voice instruction
If the route section should no longer be
1. "Navigation"
bypassed:
2. "Map"
1. "Navigation"
3. Highlight the
symbol.
2. "Route information"
4. Press the controller twice.
3. "New route for"
4. "Remove blocking"
Adjusting volume for voice instructions
The volume can be adjusted only while a voice
Gas station recommendations
instruction is being issued.
The remaining range is calculated and filling
1. Have the last voice instruction repeated, if
stations along the route are displayed.
necessary.
Even with the most up-to-date navigation data,
2. Turn the button during the voice instruction
information about certain special destinations
to select the desired volume.
may have changed; for example, filling stations
may not be in operation.
1. "Navigation"
2. "Route information"
3. "Recommended refuel"
A list of filling stations is displayed.
4. Select a gas station.
5. Select the symbol.
6. "Start guidance": route guidance to the
The setting is stored for the remote control cur-
selected filling station is started.
rently in use.
"Add as another destination": the filling sta-
tion is incorporated into the route.
Map view
Destination guidance
Displaying the map view
through voice instructions
1. "Navigation"
2. "Map"
Switching voice instructions on/off
Voice instructions can be switched on or off
Overview
during destination guidance.
1. "Navigation"
2. "Map"
3.
"Voice instructions"
For rapid access, the feature can be stored on a
programmable memory key, refer to page 25.
145
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Navigation Destination guidance
1
Toolbar
Toolbar
2
Route segment with traffic obstruction
The following functions are available directly in
the map view:
3
Road sign for traffic obstruction
Symbol
Function
4
Planned route
5
Current location
Starting/stopping destination
guidance
6
Upper status box
Switching voice instructions on/
7
Lower status box
off
Lines on the map
Changing route criteria or
selecting route alternatives
Streets and roads are depicted with different
colors and lines according to their classification.
Special destinations
Dotted lines represent railroad and ferry con-
Displaying traffic bulletins
nections. National borders are depicted with
thin lines.
Interactive map
Map view settings
Traffic obstructions
Changing scale
Small triangles along the planned route identify
route segments with traffic obstructions,
depending on map scale. The direction of the
Changing the map section
triangles indicates the direction of the obstruc-
"Interactive map"
tion.
> To shift the map: move the controller in the
Road signs classify the obstructions.
required direction.
> Red road sign: the obstruction relates to the
> To shift the map diagonally: move the con-
planned route or direction of travel.
troller in the required direction and turn it.
> Gray road sign: the obstruction does not
relate to the planned route or direction of
Changing scale
travel.
1. Select the symbol.
Traffic bulletins, refer to page 147.
2. Turn the controller to adjust the scale.
Planned route
Automatic scaling of the map
After route guidance is started, the planned
In the map view facing north, turn the controller
route is displayed on the map.
in any direction until AUTO is displayed as the
map scale.
Status boxes
The map shows the entire range from your
Show/hide: press the controller.
location to the destination.
> Upper status box: time, phone details, and
Settings for the map view
entertainment details.
The map is shown on the Control Display.
> Lower status box: symbol for active route
guidance, traffic bulletin status, arrival time,
1. Open "Options".
and distance from destination.
2. "Settings"
Set the optimized map view.
146
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Destination guidance Navigation
> "Day/night mode"
Traffic bulletins
Select and adjust depending on light
conditions.
Overview
"Traffic conditions/gray map" active:
> You can display the traffic bulletins from
Settings are not taken into account.
radio stations that broadcast the TMC
> "Satellite images"
(Traffic Message Channel) of a traffic infor-
Depending on the availability and resolu-
mation service. Bulletins about traffic
tion, satellite images are displayed in scales
obstructions and hazards are continuously
of approx. 1 mile to 600 miles/2 km to
updated.
1,000 km.
> Traffic bulletins are indicated by symbols on
> "Perspective view in 3D"
the map.
Displays a three-dimensional view. Promi-
> Traffic bulletins for the surrounding area are
nent areas that are contained in the naviga-
stored in a list.
tion data are displayed on the map in 3D.
The symbol in the toolbar of the map view
> "Traffic conditions/gray map"
turns red if a traffic bulletin relates to the
The map is optimized for displaying traffic
calculated route.
bulletins. Symbols for the special destina-
tions are no longer displayed.
Real Time Traffic Information End-User
Provisions
Map view for the split screen display
Certain BMW models equipped with navigation
The map view for the split screen can be
have the capability to display real-time traffic
selected separately from the main screen.
information. If your system has this capability
1.
Open "Options".
the following additional terms and conditions
apply:
2.
"Split screen"
An End-User shall no longer have the right to
3.
Move the controller to the right repeatedly
use the Traffic Data in the event that the End-
until the split screen content is selected.
User is in material breach of the terms and
4.
Select "Split screen content" or scale.
conditions contained herein.
5.
Select the map view:
A. Total Traffic Network, a division of Clear
> "Arrow display"
Channel Broadcasting, Inc. ("Total Traffic Net-
> "Map facing north"
work") holds the rights to the traffic incident
data and RDS-TMC network through which it is
> "Map direction of travel"
delivered. You may not modify, copy, scan or
> "Map view with perspective"
use any other method to reproduce, duplicate,
> "Position"
republish, transmit or distribute in any way any
portion of traffic incident data. You agree to
> "Exit ramp view"
indemnify, defend and hold harmless BMW of
> "Traffic conditions/gray map"
North America, LLC. ("BMW NA") and Total
6.
To change the scale: switch to the split
Traffic Network, Inrix, Inc (and their affiliates)
screen and turn the controller.
against any and all claims, damages, costs or
other expenses that arise directly or indirectly
out of (a) your unauthorized use of the traffic
147
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Navigation Destination guidance
incident data or the RDS-TMC network, (b) your
Accessing traffic bulletins
violation of this directive and/or (c) any unautho-
1. "Navigation"
rized or unlawful activities by you in connection
2. "Map"
herewith.
3.
"Traffic Info"
B. Total Traffic Network traffic data is informa-
tional only. User assumes all risk of use. Total
First, the traffic bulletins for the calculated
Traffic Network, BMW NA, and their suppliers
route are displayed.
make no representations about content, traffic
The traffic bulletins are sorted in the order
and road conditions, route usability, or speed.
of their distance from the current vehicle
C. The licensed material is provided to license
position.
"as is," and "where is". Total Traffic Network,
4. Select a traffic bulletin.
including, but not limited to, any and all third
"More information":
party providers of any of the licensed material,
Display additional information.
expressly disclaims, to the fullest extent permit-
5. Scroll to the next or previous traffic bulletin
ted by law, all warranties or representations
if desired.
with respect to the licensed material (including,
without limitation, that the licensed material will
Traffic bulletins on the map
be error-free, will operate without interruption
"Traffic conditions/gray map" active: the Con-
or that the traffic data will be accurate), express,
trol Display changes to a grayscale display. This
implied or statutory, including, without limita-
enables a better view of the traffic bulletins. The
tion, the implied warranties of merchantability,
day/night mode is disregarded in this setting.
non-infringement fitness for a particular pur-
Symbols or special destinations are no longer
pose, or those arising from a course of dealing
displayed.
or usage of trade.
1. "Navigation"
D. Neither Total Traffic Network, Inrix, Inc. nor
BMW NA will be liable to you for any indirect,
2. "Map"
special, consequential, exemplary, or incidental
3. Open "Options".
damages (including, without limitation, lost rev-
4. "Settings"
enues, anticipated revenues, or profits relating
to the same) arising from any claim relating
5. "Traffic conditions/gray map"
directly or indirectly to use of the traffic data,
and even if Total Traffic Network, Inrix, Inc., or
Symbols in the map view
BMW NA are aware of the possibility of such
Depending on the scale of the map and the
damages. These limitations apply to all claims,
location of the traffic obstruction along the
including, without limitation, claims in contract
route, the symbols for the traffic obstructions
and tort (such as negligence, product liability
are displayed.
and strict liability). Some states do not allow the
exclusion or limitation of incidental or conse-
Additional information in the map view
quential damages, so those particular limita-
Depending on the map scale, a traffic obstruc-
tions may not apply to you.
tion's length, direction and impact are displayed
on the map using triangles or gray bars along
Activating/deactivating reception
the calculated route.
1. "Navigation"
> Red: traffic congestion
2. Open "Options".
> Orange: stop-and-go traffic
3. "Receive Traffic Info"
> Yellow: heavy traffic
148
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Destination guidance Navigation
> Green: clear roads
The upper part of the message shows:
> Gray: general traffic information, e.g.
> The symbol of the first traffic obstruction,
construction zone
possibly with the remaining distance before
the start of the traffic obstruction.
The bulletins displayed depend in the respec-
tive traffic information service.
> Total length of traffic obstructions on the
route.
Filtering traffic bulletins
> Extension of driving time due to the traffic
Set which traffic bulletins are displayed on the
obstructions
map.
The lower part of the message shows:
1. "Navigation"
> Suggested alternate route with remaining
2. "Map"
distance before the start of the alternate
route.
3. Open "Options".
> Difference of the route length compared to
4. "Traffic Info categories"
the original route.
5. Select the desired categories.
> Time gained by taking the alternate route
compared to the original route with the
traffic obstructions.
In addition to the original route displayed in
white, the split screen will also show the alter-
nate route.
Taking an alternate route:
"Detour"
With particular hazards, e.g. objects on the
roadway, a message is displayed without a
Traffic bulletins from the selected categories
possible alternate route.
are displayed on the map.
It is also possible to take alternate routes can
> Traffic bulletins that lie on the route are
also be taken if the traffic reports are accessed
always shown.
via the list:
> For your personal safety, it is not possible to
1. "Navigation"
hide traffic bulletins that announce a poten-
tial hazard.
2. "Map"
3.
"Traffic Info"
Route guidance with traffic bulletins
4. "Detour information"
Semi-dynamic route guidance
5.
"Detour"
With traffic bulletin reception switched on,
Dynamic destination guidance
semi-dynamic route guidance is active.
The route is automatically changed in the event
The system takes into account the existing traf-
of traffic obstructions.
fic bulletins during route guidance. A message
is displayed as a function of the route, the traffic
> The system does not point out traffic
bulletins, and the possible alternate routes. In
obstructions along the original route.
the event of a traffic obstruction, an alternate
> Traffic bulletins will continue to be dis-
route will be suggested if possible.
played on the map.
149
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Navigation Destination guidance
> Depending on the type of road and the
nature and length of the traffic obstruction,
the route can also be calculated so that you
travel through the traffic obstruction.
> Certain hazards are displayed regardless of
the setting.
To activate dynamic route guidance:
1. "Navigation"
2. Open "Options".
3. "Dynamic guidance"
150
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
What to do if … Navigation
What to do if …
The area has not been fully recorded yet, or
Vehicle equipment
you have left the recommended route and
In this chapter, all production, country, and
the system requires a few seconds to calcu-
optional equipment that is offered in the model
late a new route suggestion.
range is described. Equipment is also described
that is not available because of, for example,
selected options or country version. This also
applies to safety related functions and systems.
What to do if…
> The current position cannot be displayed?
The position is in an unrecognized region, in
a poor reception area, or the system is in the
process of determining the position.
Reception is generally available when you
are in the open.
> The destination guidance does not accept a
destination without a street name?
A downtown area cannot be determined for
the town or city that has been entered. Input
any street in the selected town/city and
start destination guidance.
> The destination guidance does not accept a
destination?
The destination data is not contained in the
navigation data. Choose a destination as
close as possible to the original one.
> The letters for a destination cannot be
selected during destination entry?
The stored data do not contain the data of
the destination. Select a destination that is
as close as possible to the original.
> The map view is displayed in grayscale?
"Traffic conditions/gray map" active: the
Control Display changes to a grayscale
display. This enables a better view of the
traffic bulletins.
> Voice instructions are no longer issued
before intersections during destination
guidance?
151
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Entertainment
Operation of the radio, CD equipment and
external audio devices as well as their tone
settings are described in this chapter.
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Entertainment On/off and tone
On/off and tone
Vehicle equipment
Buttons near the CD/DVD player
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. Equipment is also described
that is not available because of, for example,
selected options or country version. This also
applies to safety related functions and systems.
General information
1
Sound output for entertainment on/off,
The following audio and video sources share
volume
the same control elements and adjustments:
> Press: switch on/off
> Radio
When you switch on the unit, the last set
> CD/DVD player
radio station or track is played.
> Video
> Turn: adjusting the volume
> External devices, e.g. MP3 player
2
Eject the CD/DVD
3
CD/DVD drive
4
FM/AM: change the radio station
Controls
waveband
The audio and video sources can be controlled
5
MODE: change the audio and video
using the:
sources
> Buttons near the CD/DVD player
6
Station scan/track search
> iDrive
> Change the radio station
> Buttons on the steering wheel, refer to
> Select the track for the CD/DVD player
page 13
and certain multimedia devices
> Programmable memory keys, refer to
page 25
> Voice activation system
Switching on/off
To switch the entertainment audio output on or
off:
Press knob 1 next to the CD/DVD player.
This symbol on the Control Display indicates
that sound output is switched off.
The sound output is available for approx.
20 minutes after the ignition was switched off.
For sound output, switch the unit back on.
154
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
On/off and tone Entertainment
Adjusting volume
3. Select the desired tone setting.
Turn knob 1 next to the CD/DVD player until the
desired volume is obtained.
You can also adjust the volume with buttons on
the steering wheel, refer to page 13.
Setting tone controls
You can alter various tone settings, e.g. treble
and bass or the speed-dependent volume
4. To adjust: turn the controller.
increase.
5. To store: press the controller.
The tone settings are set for all audio sources at
once.
Equalizer
The settings are stored for the remote control
You can set individual sound frequency ranges.
currently in use.
1. "CD/Multimedia", "Radio" or "Settings".
Treble, bass, balance, fader
2. "Tone"
> "Treble": treble adjustment.
3. "Equalizer"
> "Bass": bass adjustment.
4. Select the desired setting.
> "Balance": left/right volume distribution
> "Fader": front/rear volume distribution
Adjustments
1. "CD/Multimedia", "Radio" or "Settings".
2. "Tone"
5. To adjust: turn the controller.
6. To store: press the controller.
155
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Entertainment On/off and tone
Multi-channel playback, surround
Adjustments
You can choose between stereo and multi-
1. "CD/Multimedia", "Radio" or "Settings".
channel playback, surround.
2. "Tone"
1. "CD/Multimedia", "Radio" or "Settings".
3. "Volume settings"
2. "Tone"
4. Select the desired volume setting.
3. "Surround"
5. To adjust: turn the controller.
When surround is activated, multi-channel
6. To store: press the controller.
playback is simulated when playing an audio
track in stereo.
Resetting tone settings
You can reset all tone settings to the default
Volume levels
setting.
> "Speed volume": volume is adapted
1. "CD/Multimedia", "Radio" or "Settings".
depending on the speed
2. "Tone"
> "PDC": volume of the PDC acoustic signal
relative to the entertainment sound output
3. "Reset"
> "Gong": volume of the acoustic signal, e.g.
for the acoustic Safety Belt Reminder rela-
tive to the entertainment sound output
> "Microphone": volume of the microphone
during a phone conversation.
> "Loudspeak.": volume of the speaker
during a phone conversation.
156
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Radio Entertainment
Radio
1. "Radio"
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. Equipment is also described
that is not available because of, for example,
selected options or country version. This also
applies to safety related functions and systems.
General information
Your radio is designed for reception of the
2. "FM" or "AM"
following stations:
3. Select the desired station.
> FM and AM
> HD Radio
> Satellite radio
Selecting a station
The selected station is stored for the remote
control currently in use.
Changing stations
Turn the controller and press it
or
Press the
button for the corresponding
Press the knob if the sound output is switched
direction
off.
or
Press the buttons on the steering wheel, refer
to page 13.
Selecting a station manually
Station selection via the frequency.
1. "Radio"
2. "FM" or "AM"
3. "Manual"
157
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Entertainment Radio
4. Select the frequency: turn the controller.
4. Press the controller for an extended period.
5. Select the desired memory location.
The stations are stored for the remote control
currently in use.
Via programmable memory keys
You can store a station on the programmable
memory keys, refer to page 25.
1. Select a station.
2.
Press and hold the desired
To store the station: press the controller for an
button.
extended period.
Renaming a radio station
RDS - Radio Data System
An FM station with changing station names can
In the FM waveband, additional information is
be renamed.
transmitted via RDS. If the reception conditions
1. "Radio"
are good, the station names are shown on the
2. "FM"
Control Display. If the reception is weak or dis-
3. Select the desired station.
rupted, it can take some time before the station
names are displayed.
4. Open "Options".
5. "Rename to:"
Switching the RDS on/off
If necessary, wait until the desired name
1. "Radio"
appears.
2. "FM"
The selected station name is added to the list of
3. Open "Options".
current stations and stored stations.
4. "RDS"
Storing stations
Via iDrive
1. "Radio"
2. "FM" or "AM"
3. Select the desired station.
The setting is stored for the remote control
currently in use.
158
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Radio Entertainment
HD Radio™ reception
Displaying additional information
Some stations broadcast additional information
Many radio stations transmit analog and digital
on the current track, such as the name of the
signals.
artist.
License conditions
1. Select the desired station.
HD radio technology manufactured under
2. Open "Options".
license from iBiquity Digital Corporation. U.S.
and foreign patents. HD Radio™ and the HD,
3. "Station info"
HD Radio, and Arc logos are proprietary trade-
marks of iBiquity Digital Corp.
Selecting a substation
The symbol indicates that a main station also
Activating/deactivating digital radio
broadcasts additional substations. The station
reception
name of the main station ends in HD1. The sta-
1. "Radio"
tion names of the substations end in HD2, HD3,
etc.
2. "FM" or "AM"
1. Select the desired station.
3. Open "Options".
2. Press the controller.
4. "HD Radio Reception"
3. Select the substation.
The setting is stored for the remote control
currently in use.
When reception is poor, the substation is muted
for several seconds.
This symbol is displayed when a station is
being received digitally.
When setting a station that has a digital signal, it
Presets
may take several seconds before the station
plays in digital quality.
It is possible to store up to 40 stations.
Instructions for HD stations whose station
Selecting a station
name ends with ...HD or ...HD1:
1. "Radio"
In areas in which the station is not continuously
received in digital mode, playback switches
2. "Presets"
between analog and digital reception. In this
3. Select the desired station.
case, switch off digital radio reception.
Instructions for HD multicast stations whose
station name ends with ...HD2 or ...HD3:
In areas in which the station is not continuously
received in digital mode, interruptions in the
audio signal may occur, which can last for sev-
eral seconds. This depends on the reception.
159
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Entertainment Radio
Storing stations
The station currently selected is stored.
1. "Radio"
2. "Presets"
3. "Store station"
4. Select the desired memory location.
The list of stored stations is stored for the
remote control currently in use.
You can also store the stations on the program-
mable memory keys, refer to page 25.
Deleting a station
1. "Radio"
2. "Presets"
3. Select the desired station.
4. Open "Options".
5. "Delete entry"
160
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Satellite radio
Entertainment
Satellite radio
Vehicle equipment
Activating channels
The Unsubscribed Channels category contains
In this chapter, all production, country, and
all disabled channels.
optional equipment that is offered in the model
range is described. Equipment is also described
1. "Radio"
that is not available because of, for example,
2. "Satellite radio"
selected options or country version. This also
3.
"Category"
applies to safety related functions and systems.
General information
The channels are offered in fixed packages.
Packages must be activated by telephone.
Navigation bar
4. Select the Unsubscribed Channels
Symbol
Function
category.
Changing list view
5. Select desired channel.
Selecting category
The telephone number and electronic serial
number, ESN, are displayed.
Entering channel directly
6. Dial the telephone number to have the
Time shift
channels activated.
Accessing favorites, selecting
the My Favorites category
Managing favorites
Traffic Jump
The functions of the navigation bar symbols can
also be stored on the programmable memory
buttons, refer to page 25.
This telephone number can also be used to
Managing subscription
deactivate the channels.
Clear reception is required for activating and
deactivating channels. Reception is best when
Deactivating channels
you have an unobstructed view to the sky. The
1. "Radio"
channel name is displayed in the status line.
2. "Satellite radio"
3. Open "Options".
161
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Entertainment Satellite radio
4. "Manage subscription"
Using direct channel entry
1. "Radio"
2. "Satellite radio"
3.
"Set channel"
4. Turn the controller until the desired channel
is reached and press the controller.
Storing channel
1. "Radio"
The telephone number and electronic serial
2. "Satellite radio"
number, ESN, are displayed.
3. Select "All channels" or a desired category.
5. Call Sirius to deactivate the channels.
4. Select desired channel.
5. Press the controller again.
Selecting channels
6. Press the controller again to confirm the
You can only listen to activated channels.
highlighted channel.
The selected channel is stored for the remote
control currently in use.
Via iDrive
1. "Radio"
2. "Satellite radio"
3. Select "All channels" or the desired
category.
4. Select desired channel.
7. Select the desired memory location.
The channels are stored for the remote control
currently in use.
You can also store the channels on the pro-
grammable memory keys, refer to page 25.
Changing list view
The list view changes each time the first symbol
on the navigation bar is pressed.
Via the button in the area of the
Information about the channel is displayed.
CD/DVD player
Press the
button for the corresponding
Symbol
Function
direction.
Channel name
The next channel is selected.
Artist
Track
162
Online Edition for Part no. 01402911223 - © 06/13 BMW AG

 

 

 

 

 

 

 

Content      ..     5      6      7      8     ..