Kia Sedona (2008 year). Manual - part 523

Fig. 7: Identifying Starter Cable, Terminal And Solenoid
Courtesy of KIA MOTORS AMERICA, INC.

3. Remove the 2 bolts holding the starter, then remove the starter.

4. Installation is the reverse of removal.

5. Connect the battery negative cable to the battery.

COMPONENT

Fig. 8: Exploded View Of Starter Components
Courtesy of KIA MOTORS AMERICA, INC.

2008 Kia Sedona

2008 ENGINE Starting System - Sedona

Microsoft

Saturday, May 22, 2010 4:03:21 PM

Page 6

DISASSEMBLY

1. Disconnect the M-terminal on the magnet switch assembly.

2. After loosening the 3 screws (A), detach the magnet switch assembly (B).

Fig. 9: Identifying Magnet Switch Assembly And Screws
Courtesy of KIA MOTORS AMERICA, INC.

3. Loosen the through bolts (A).

Fig. 10: Identifying Bolts
Courtesy of KIA MOTORS AMERICA, INC.

4. Remove the brush holder assembly (A), yoke (B) and armature (C).

2008 Kia Sedona

2008 ENGINE Starting System - Sedona

Microsoft

Saturday, May 22, 2010 4:03:21 PM

Page 7

Fig. 11: Identifying Brush Holder Assembly, Yoke And Armature
Courtesy of KIA MOTORS AMERICA, INC.

5. Remove the shield (A) and packing (B).

Fig. 12: Identifying Shield And Packing
Courtesy of KIA MOTORS AMERICA, INC.

6. Remove the lever plate (A) and lever packing (B).

2008 Kia Sedona

2008 ENGINE Starting System - Sedona

Microsoft

Saturday, May 22, 2010 4:03:21 PM

Page 8

Fig. 13: Identifying Lever Plate And Lever Packing
Courtesy of KIA MOTORS AMERICA, INC.

7. Disconnect the planet gear (A).

Fig. 14: Identifying Planet Gear
Courtesy of KIA MOTORS AMERICA, INC.

8. Disconnect the planet shaft assembly (A) and lever (B).

2008 Kia Sedona

2008 ENGINE Starting System - Sedona

Microsoft

Saturday, May 22, 2010 4:03:21 PM

Page 9