Kia Sedona (2008 year). Manual - part 387

Fig. 30: Scan Tool Screen Display - 1.9 STEERING ANGLE SENSOR 
Courtesy of KIA MOTORS AMERICA, INC. 

7. The procedure is finished. Push the "ESC" key. 

Fig. 31: Scan Tool Screen Display - CALIBRATION COMPLETION 
Courtesy of KIA MOTORS AMERICA, INC. 

8. Scanner OFF.  

9. Remove the scanner from the vehicle.  

10. Confirm the Steering angle sensor (SAS) calibration as driving the vehicle (turn left once, turn right 

once).  

 

2008 Kia Sedona 

2008 BRAKES ESP (Electronic Stability Program) - Sedona

  

Microsoft 

 

Saturday, May 22, 2010 6:53:50 PM

Page 26 

© 2006 Mitchell Repair Information Company, LLC. 

2008 ACCESSORIES & BODY, CAB

Exterior - Sedona 

FENDER 

REPLACEMENT 

1. Remove the following items. 



Headlamp assembly. See HEAD LAMPS .  



Front bumper. See FRONT BUMPER .  



Side garnish (B), mud guide (C), cover (D).  

2. After loosening the fender mounting bolts, remove the fender (A).  

3. Installation is the reverse of removal. 

NOTE:



Take care not to damage the hood and body. 



When removing the clips, use a clip remover. 

 

2008 Kia Sedona EX 

2008 ACCESSORIES & BODY, CAB Exterior - Sedona

  

 

2008 Kia Sedona EX 

2008 ACCESSORIES & BODY, CAB Exterior - Sedona

  

Microsoft 

 

Monday, May 24, 2010 4:07:08 PM

Page 1 

© 2006 Mitchell Repair Information Company, LLC. 

Microsoft 

 

Monday, May 24, 2010 4:07:12 PM

Page 1 

© 2006 Mitchell Repair Information Company, LLC. 

Fig. 1: Identifying Fastener Locations 
Courtesy of KIA MOTORS AMERICA, INC. 

HOOD 

REPLACEMENT 

HOOD ASSEMBLY REPLACEMENT 

1. Disconnect the windshield washer nozzle connecting tube (D). 

NOTE:



When removing and installing the hood, an assistant is necessary. 



Take care not to damage the hood and body.  



When removing the clips, use a clip remover.  

 

2008 Kia Sedona EX 

2008 ACCESSORIES & BODY, CAB Exterior - Sedona

  

Microsoft 

 

Monday, May 24, 2010 4:07:08 PM

Page 2 

© 2006 Mitchell Repair Information Company, LLC. 

2. Using a screwdriver (E), lift up slightly the socket clips (F) of both ends on the lifter (G), and then 

remove the lifter from the bracket (H).  

3. After loosen the hood hinge (B) mounting bolts, remove the hood (C).  

4. Installation is the reverse of removal. 

Fig. 2: Identifying Bolts Locations And Torque Specifications 
Courtesy of KIA MOTORS AMERICA, INC. 

HOOD INSULATOR REPLACEMENT 

1. Using a clip remover, detach the clips, and remove the hood insulator (A). 

NOTE:



Make sure the hood opens properly and locks securely.  



Adjust the hood alignment. See HOOD ADJUSTMENT PROCEDURES. 

 

2008 Kia Sedona EX 

2008 ACCESSORIES & BODY, CAB Exterior - Sedona

  

Microsoft 

 

Monday, May 24, 2010 4:07:08 PM

Page 3 

© 2006 Mitchell Repair Information Company, LLC.