FANUC Series 0i-MODEL F. For Lathe System OPERATOR'S MANUAL (B-64604EN-1/01) - page 27

B-64604EN-1/01

 

APPENDIX

 

 

- 413 - 

B. LIST OF FUNCTIONS INCLUDE 

ADDRESS P IN THE PROGRAM 

COMMAND

Lathe system 

G code system 

Function name 

Machining 

center 

system

 

A B C 

Reference item 

Left-handed rigid 
tapping cycle 
(FS10/11 format) 

G84.3 

- 

- 

- 

- CONNECTION MANUAL (FUNCTION)   
"SPINDLE SPEED FUNCTION" 
- OPERATOR’S MANUAL (For M Series) 
II. PROGRAMMING, "FUNCTIONS TO 
SIMPLIFY PROGRAMMING" 

Constant surface 
speed control 

G96 

G96 G96 G96 

- 

CONNECTION MANUAL (FUNCTION)   

"SPINDLE SPEED FUNCTION" 
- OPERATOR’S MANUAL (Common to 
T/M Series) II. PROGRAMMING, 
"SPINDLE SPEED FUNCTION" 

Spindle Indexing 
Function 

G96.1 

 to  

G96.3 

G96.1 

to 

G96.3

G96.1 

to 

G96.3

G96.1 

to 

G96.3

- CONNECTION MANUAL (FUNCTION)   
"SPINDLE SPEED FUNCTION" 
- OPERATOR’S MANUAL (Common to 
T/M Series) II. PROGRAMMING, 
"SPINDLE SPEED FUNCTION" 

Spindle control with 
servo motor 

G96.4 G96.4

G96.4

G96.4

- 

CONNECTION MANUAL (FUNCTION)   

"SPINDLE SPEED FUNCTION" 
- OPERATOR’S MANUAL (Common to 
T/M Series) II. PROGRAMMING, 
"SPINDLE SPEED FUNCTION" 

Note 1) :  Arbitrary G code is optional with the following compilation parameter. 

 

  - No.9013 to No.9022, No.9034, No.9045 to No.9047, No.9129 to No.9137 

 

 

 APPENDIX

 B-64604EN-1/01

 

- 414 - 

B. LIST OF FUNCTIONS INCLUDE 

ADDRESS P IN THE PROGRAM 
COMMAND 

B.2 

LIST OF FUNCTIONS INCLUDE ADDRESS P IN THE 

ARGUMENT OF M AND S CODE 

The function including address P in the argument of M and S code is shown below. 
 

Function name 

M code 

format 

related 

parameters 

Reference item 

Waiting M codes 

M_P_ 

No.8110, No.8111,
MWP(No.8103#1) 

- CONNECTION MANUAL (FUNCTION)   
"MULTI-PATH CONTROL" 
- OPERATOR’S MANUAL (Common to T/M 
Series) II. PROGRAMMING, "MULTI-PATH 
CONTROL FUNCTION" 

Waiting M codes of 
high-speed Type 

M_P_ No.8114, 

No.8115,

MWP(No.8103#1) 

- CONNECTION MANUAL (FUNCTION)   
"MULTI-PATH CONTROL" 
- OPERATOR’S MANUAL (Common to T/M 
Series) II. PROGRAMMING, "MULTI-PATH 
CONTROL FUNCTION" 

Waiting function by 
specifying start point 

M_P_L_IP  

STW(No.8101#1), 
No.8110, No.8111,
MWP(No.8103#1) 

- CONNECTION MANUAL (FUNCTION)   
"MULTI-PATH CONTROL" 
- OPERATOR’S MANUAL (Common to T/M 
Series) II. PROGRAMMING, "MULTI-PATH 
CONTROL FUNCTION" 

(Custom macro) 
Subprogram 

M98P_  

Program end 

M99P_ 

 

OPERATOR’S MANUAL (Common to T/M 
Series) III. PROGRAMMING, "PROGRAM 
CONFIGURATION" 

External subprogram call

M198P_ 

SBP(No.3404#2) 

OPERATOR’S MANUAL (Common to T/M 
Series)  III. OPERATION, "AUTOMATIC 
OPERATION" 

Custom macro   
Macro Call Using an M 
code ( include 
specification of multiple 
definitions and special 
macro call) 

M_P_ 

MAA(No.6009#2) 

OPERATOR’S MANUAL (Common to T/M 
Series) II. PROGRAMMING, "CUSTOM MACRO"

Execution macro 
Subprogram call 

M98P_  

Subprogram call for user 
program 

M_P_  

Execution macro 
Macro Call Using an M 
code ( include 
specification of multiple 
definitions and special 
macro call) 

M_P_  

Macro Executor PROGRAMMING MANUAL 
"EXECUTION MACRO FUNCTION" 

Multi-spindle S_P_ 

MPP(No.3703#3), 
No.3781 

CONNECTION MANUAL (FUNCTION)   
"SPINDLE SPEED FUNCTION"