FANUC Series 30i/300i/300is-MODEL A. Machining Center System. User's manual - page 167

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1292 - 

 

Inputting customize data displayed as tool management data (for 15-inch display 
unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4  Press the vertical soft key [MAGAZINE], [EACH TOOL], or 

[TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [READ].   

7 

Press the horizontal soft key [DSP-LAYOUT]. 

8 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“DISPCSTM.TXT” is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts reading the customize data displayed as tool 
management data, and “INPUT” blinks in the lower right part of 
the screen. When the read operation ends, the “INPUT” 
indication disappears. 
To cancel the input of the program, press the horizontal soft key 
[CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1293 - 

8.2.9.10 

Outputting customize data displayed as tool management 

data 

 
Customize data displayed as tool management data is output from the 
memory of the CNC to an external device in the output format. 
 

Outputting customize data displayed as tool management data (for 7.2/8.4/10.4-inch 
display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2  Press the function key 

 to display the tool management 

screen, magazine screen, or each tool data screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [PUNCH].   

6 

Press the soft key [DSP-LAYOUT]. 

7 

Type the file name that you want to output. 
If the file name is omitted, default file name “DISPCSTM.TXT” 
is assumed. 

8 

Press the soft key [EXEC]. 
This starts outputting the customize data displayed as tool 
management data, and “OUTPUT” blinks in the lower right part 
of the screen. When the read operation ends, the “OUTPUT” 
indication disappears. 
To cancel the output, press the soft key [CAN]. 

 

Outputting customize data displayed as tool management data (for 15-inch display 
unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4  Press the vertical soft key [MAGAZINE], [EACH TOOL], or 

[TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [PUNCH].   

7 

Press the horizontal soft key [DSP-LAYOUT]. 

8 

Type the file name that you want to output. 
If the file name is omitted, default file name “DISPCSTM.TXT” 
is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts outputting the customize data displayed as tool 
management data, and “OUTPUT” blinks in the lower right part 
of the screen. When the read operation ends, the “OUTPUT” 
indication disappears. 
To cancel the output, press the horizontal soft key [CAN]. 

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1294 - 

8.2.9.11 

Inputting spindle waiting position name data 

 
Spindle waiting position name data is loaded into the memory of the 
CNC from an external device.    The input format is the same as the 
output format.    When spindle waiting position name data with a data 
number corresponding to existing spindle waiting position name data 
registered in the memory is loaded, the loaded spindle waiting 
position name data replaces the existing data. 
 

Inputting spindle waiting position name data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2  Press the function key 

 to display the tool management 

screen, magazine screen, or each tool data screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [READ]. 

6 

Press the soft key [SPWP-NAME]. 

7 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“POSNAME.TXT” is assumed. 

8 

Press the soft key [EXEC]. 
This starts reading the spindle waiting position name data, and 
“INPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “INPUT” indication disappears. 
To cancel the input of the program, press the soft key [CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1295 - 

 

Inputting spindle waiting position name data (for 15-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4  Press the vertical soft key [MAGAZINE], [EACH TOOL], or 

[TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [READ].   

7 

Press the horizontal soft key [SPWP-NAME]. 

8 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“POSNAME.TXT” is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts reading the spindle waiting position name data, and 
“INPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “INPUT” indication disappears. 
To cancel the input of the program, press the horizontal soft key 
[CAN]. 

 

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1296 - 

8.2.9.12 

Outputting spindle waiting position name data 

 
Spindle waiting position name data is output from the memory of the 
CNC to an external device in the output format. 
 

Outputting spindle waiting position name data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2  Press the function key 

 to display the tool management 

screen, magazine screen, or each tool data screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [PUNCH].   

6 

Press the soft key [SPWP-NAME]. 

7 

Type the file name that you want to output. 
If the file name is omitted, default file name “POSNAME.TXT” 
is assumed. 

8 

Press the soft key [EXEC]. 
This starts outputting the spindle waiting position name data 
display, and “OUTPUT” blinks in the lower right part of the 
screen. When the read operation ends, the “OUTPUT” indication 
disappears. 
To cancel the output, press the soft key [CAN]. 

 

Outputting spindle waiting position name data (for 15-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4  Press the vertical soft key [MAGAZINE], [EACH TOOL], or 

[TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [PUNCH].   

7 

Press the horizontal soft key [SPWP-NAME]. 

8 

Type the file name that you want to output. 
If the file name is omitted, default file name “POSNAME.TXT” 
is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts outputting the spindle waiting position name data 
display, and “OUTPUT” blinks in the lower right part of the 
screen. When the read operation ends, the “OUTPUT” indication 
disappears. 
To cancel the output, press the horizontal soft key [CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1297 - 

8.2.9.13 

Inputting decimal point position data of customize data 

 
Decimal point position data of customize data is loaded into the 
memory of the CNC from an external device.    The input format is the 
same as the output format.  When decimal point position data of 
customize data with a data number corresponding to existing decimal 
point position data of customize data registered in the memory is 
loaded, the loaded decimal point position data of customize data 
replaces the existing data. 
 

Inputting decimal point position data of customize data (for 7.2/8.4/10.4-inch display 
unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2  Press the function key 

 to display the tool management 

screen, magazine screen, or each tool data screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [READ]. 

6 

Press the soft key [CSTM-DPOINT]. 

7 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“POINTPOS.TXT” is assumed. 

8 

Press the soft key [EXEC]. 
This starts reading the decimal point position data of customize 
data, and “INPUT” blinks in the lower right part of the screen. 
When the read operation ends, the “INPUT” indication 
disappears. 
To cancel the input of the program, press the soft key [CAN]. 

 

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1298 - 

 

Inputting decimal point position data of customize data (for 15-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4  Press the vertical soft key [MAGAZINE], [EACH TOOL], or 

[TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [READ].   

7 

Press the horizontal soft key [CSTM-DPOINT]. 

8 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“POINTPOS.TXT” is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts reading the decimal point position data of customize 
data, and “INPUT” blinks in the lower right part of the screen. 
When the read operation ends, the “INPUT” indication 
disappears. 
To cancel the input of the program, press the horizontal soft key 
[CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1299 - 

8.2.9.14 

Outputting decimal point position data of customize data 

 
Decimal point position data of customize data is output from the 
memory of the CNC to an external device in the output format. 
 

Outputting decimal point position data of customize data (for 7.2/8.4/10.4-inch 
display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2  Press the function key 

 to display the tool management 

screen, magazine screen, or each tool data screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [PUNCH].   

6 

Press the soft key [CSTM-DPOINT]. 

7 

Type the file name that you want to output. 
If the file name is omitted, default file name “POINTPOS.TXT” 
is assumed. 

8 

Press the soft key [EXEC]. 
This starts outputting the decimal point position data of 
customize data, and “OUTPUT” blinks in the lower right part of 
the screen. When the read operation ends, the “OUTPUT” 
indication disappears. 
To cancel the output, press the soft key [CAN]. 

 

Outputting decimal point position data of customize data (for 15-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4  Press the vertical soft key [MAGAZINE], [EACH TOOL], or 

[TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [PUNCH].   

7 

Press the horizontal soft key [CSTM-DPOINT]. 

8 

Type the file name that you want to output. 
If the file name is omitted, default file name “POINTPOS.TXT” 
is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts outputting the decimal point position data of 
customize data, and “OUTPUT” blinks in the lower right part of 
the screen. When the read operation ends, the “OUTPUT” 
indication disappears. 
To cancel the output, press the horizontal soft key [CAN].