FANUC Series 30i/300i/300is-MODEL A. Machining Center System. User's manual - page 166

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1284 - 

8.2.9.4 

Outputting magazine data 

 
All magazine data is output in the output format from the memory of 
the CNC to an external device. 
 

Outputting magazine data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2  Press the function key 

 to display the tool management 

screen or magazine screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [PUNCH].   

6 

Press the soft key [MAGAZINE]. 

7 

Type the file name that you want to output. 
If the file name is omitted, default file name “MAGAZINE.TXT” 
is assumed. 

8 

Press the soft key [EXEC]. 
This starts outputting the magazine data, and “OUTPUT” blinks 
in the lower right part of the screen. When the read operation 
ends, the “OUTPUT” indication disappears. 
To cancel the output, press the soft key [CAN]. 

 

Outputting magazine data (for 15-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4 

Press the vertical soft key [MAGAZINE] or [TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [PUNCH].   

7 

Press the horizontal soft key [MAGAZINE].   

8 

Type the file name that you want to output. 
If the file name is omitted, default file name “MAGAZINE.TXT” 
is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts outputting the magazine data, and “OUTPUT” blinks 
in the lower right part of the screen. When the read operation 
ends, the “OUTPUT” indication disappears. 
To cancel the output, press the horizontal soft key [CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1285 - 

8.2.9.5 

Inputting tool life status name data 

 
Tool life status name data is loaded into the memory of the CNC from 
an external device. The input format is the same as the output format.   
When tool life status name data with a data number corresponding to 
existing tool life status name data registered in the memory is loaded, 
the loaded tool life status name data replaces the existing tool life 
status name data. 
 

Inputting tool life status name data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2  Press the function key 

 to display the tool management 

screen or magazine screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [READ]. 

6 

Press the soft key [STATUS]. 

7 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“STATUS.TXT” is assumed. 

8 

Press the soft key [EXEC]. 
This starts reading the tool life status name data, and “INPUT” 
blinks in the lower right part of the screen. When the read 
operation ends, the “INPUT” indication disappears. 
To cancel the input of the program, press the soft key [CAN]. 

 

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1286 - 

 

Inputting tool life status name data (for 15-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4 

Press the vertical soft key [MAGAZINE] or [TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [READ].   

7 

Press the horizontal soft key [STATUS]. 

8 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“STATUS.TXT” is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts reading the tool life status name data, and “INPUT” 
blinks in the lower right part of the screen. When the read 
operation ends, the “INPUT” indication disappears. 
To cancel the input of the program, press the horizontal soft key 
[CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1287 - 

8.2.9.6 

Outputting tool life status name data 

 
All tool life status name data is output in the output format from the 
memory of the CNC to an external device. 
 

Outputting tool life status name data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2  Press the function key 

 to display the tool management 

screen or magazine screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [PUNCH].   

6 

Press the soft key [STATUS]. 

7 

Type the file name that you want to output. 
If the file name is omitted, default file name “STATUS.TXT” is 
assumed. 

8 

Press the soft key [EXEC]. 
This starts outputting the tool life status name data, and 
“OUTPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “OUTPUT” indication disappears. 
To cancel the output, press the soft key [CAN]. 

 

Outputting tool life status name data (for 15-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4 

Press the vertical soft key [MAGAZINE] or [TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [PUNCH].   

7 

Press the horizontal soft key [STATUS]. 

8 

Type the file name that you want to output. 
If the file name is omitted, default file name “STATUS.TXT” is 
assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts outputting the tool life status name data, and 
“OUTPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “OUTPUT” indication disappears. 
To cancel the output, press the horizontal soft key [CAN]. 

 

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1288 - 

8.2.9.7 

Inputting name data of customize data 

 
Name data of customize data is loaded into the memory of the CNC 
from an external device. The input format is the same as the output 
format.  When name data of customize data with a data number 
corresponding to existing name data of customize data registered in 
the memory is loaded, the loaded name data of customize data 
replaces the existing data. 
 

Inputting name data of customize data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2  Press the function key 

 to display the tool management 

screen or magazine screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [READ]. 

6 

Press the soft key [CUSTOM]. 

7 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“CUSTOMIZ.TXT” is assumed. 

8 

Press the soft key [EXEC]. 
This starts reading the name data of customize data, and 
“INPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “INPUT” indication disappears. 
To cancel the input of the program, press the soft key [CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1289 - 

 

Inputting name data of customize data (for 15-inch display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4 

Press the vertical soft key [MAGAZINE] or [TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [READ].   

7 

Press the horizontal soft key [CUSTOM]. 

8 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“CUSTOMIZ.TXT” is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts reading the name data of customize data, and 
“INPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “INPUT” indication disappears. 
To cancel the input of the program, press the horizontal soft key 
[CAN]. 

 

8.DATA INPUT/OUTPUT

 OPERATION 

B-63944EN/03

 

 

- 1290 - 

8.2.9.8 

Outputting name data of customize data 

 
All name data of customize data is output in the output format from 
the memory of the CNC to an external device. 
 

Outputting name data of customize data (for 7.2/8.4/10.4-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2  Press the function key 

 to display the tool management 

screen or magazine screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [PUNCH].   

6 

Press the soft key [CUSTOM]. 

7 

Type the file name that you want to output. 
If the file name is omitted, default file name “CUSTOMIZ.TXT” 
is assumed. 

8 

Press the soft key [EXEC]. 
This starts outputting the name data of customize data, and 
“OUTPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “OUTPUT” indication disappears. 
To cancel the output, press the soft key [CAN]. 

 

Outputting name data of customize data (for 15-inch display unit) 

Procedure 

1 

Make sure the output device is ready for output. 

2 

Press the function key 

. 

3 

Press the vertical soft key [NEXT PAGE] until vertical soft key 
[TOOL MANAGER] appears. 
Press the vertical soft key [TOOL MANAGER]. 

4 

Press the vertical soft key [MAGAZINE] or [TOOL]. 

5 

Press the EDIT switch on the machine operator’s panel.   

6 

Press the horizontal soft key [PUNCH].   

7 

Press the horizontal soft key [CUSTOM]. 

8 

Type the file name that you want to output. 
If the file name is omitted, default file name “CUSTOMIZ.TXT” 
is assumed. 

9 

Press the horizontal soft key [EXEC]. 
This starts outputting the name data of customize data, and 
“OUTPUT” blinks in the lower right part of the screen. When the 
read operation ends, the “OUTPUT” indication disappears. 
To cancel the output, press the horizontal soft key [CAN]. 

 

B-63944EN/03

 OPERATION 

8.DATA INPUT/OUTPUT

 

 

- 1291 - 

8.2.9.9 

Inputting customize data displayed as tool management data 

 
Customize data displayed as tool management data is loaded into the 
memory of the CNC from an external device.    The input format is the 
same as the output format.  When customize data displayed as tool 
management data with a data number corresponding to existing 
customize data displayed as tool management data registered in the 
memory is loaded, the loaded customize data replaces the existing 
data. 
 

Inputting customize data displayed as tool management data (for 7.2/8.4/10.4-inch 
display unit) 

Procedure 

1 

Make sure the input device is ready for reading. 

2  Press the function key 

 to display the tool management 

screen, magazine screen, or each tool data screen. 

3 

Press the EDIT switch on the machine operator’s panel.   

4 

Press the soft key [(OPRT)]. 

5 

Press the soft key [READ]. 

6 

Press the soft key [DSP-LAYOUT]. 

7 

Type the name of the file that you want to input. 
If the input file name is omitted, default input file name 
“DISPCSTM.TXT” is assumed. 

8 

Press the soft key [EXEC]. 
This starts reading the customize data displayed as tool 
management data, and “INPUT” blinks in the lower right part of 
the screen. When the read operation ends, the “INPUT” 
indication disappears. 
To cancel the input of the program, press the soft key [CAN].