Power Cab System Reference. Manual - part 17

 

  Index      Locomotives - books     Power Cab System Reference - service manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  15  16  17  18   ..

 

 

Power Cab System Reference. Manual - part 17

 

 

66

Copyright & Trademarks

Copyright © 1994-2010 NCE Corporation. The identifying product terms Power
Cab

TM

, PH-Pro

TM

, ProCab

TM

, and SmartCab

TM

 are trademarks of NCE Corporation. The

look and feel of this software and its interaction with the user through the ProCab or
SmartCab is copyright NCE Corporation. The distinctive shape of the ProCab

TM

 with

LCD and/or thumbwheel is a trademark of NCE Corporation. Digitrax® is a registered
trademark of Digitrax® Inc. All other non-NCE brands and product names mentioned
are likely to be trademarks or registered trademarks of their respected companies.

Limited Warranty

NCE guarantees that every Power Cab

TM

 DCC System is free from physical defects

in material and workmanship for a period of 1 year.

Within the first year full repair or replacement will be made to the original purchaser of
any item that has failed due to manufacturer defect. Should the item no longer be
produced and the item not repairable a similar item will be substituted at the
manufacturer’s discretion. The customer pays only shipping to the NCE Warranty
Center. Please save your original receipt as a photocopy of it may be requested.
NCE returns the items UPS ground unless other arrangements are made in
advance.

After the first year a fair and reasonable service charge may be placed on each
failed item returned for repair. Should the item no longer be produced and the item not
repairable a similar item will be substituted at the manufacturer’s discretion. The
customer pays shipping to and from the NCE Warranty Center.

This warranty is not valid if the customer has intentionally misused, miswired,
performed any unauthorized alterations to the product or removed any product
protection devices (such as heat shrink wrapping from decoders). In this case a
service charge will be applied for all repairs and replacements. To protect the
warranty, please contact the Warranty Center for authorization prior to altering any
product. In no event will NCE’s liability exceed the price paid for the product from
direct, indirect, special, incidental or consequential damages resulting from the use of
the product, it’s accompanying software or its documentation. NCE makes no
warranty or representation, expressed, implied or statutory with respect to its
products or the contents or use of this documentation and accompanying software
and specifically disclaims its quality, performance, merchantability, or fitness for any
particular purpose. NCE reserves the right to revise or update its products, software,
or documentation without obligation to notify any individual or entity.

Please contact the Warranty Center for specific shipping instructions and any
service charges before returning any product for service. Address all inquiries to:

NCE Warranty Center

82 East Main St.

Webster, New York 14580

Phone: 585-265-0230  Fax: 585-265-0234

67

FCC Statement

This NCE product complies with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used according
to the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. Keep in mind that by FCC rules, all electronic equipment must accept
any interference, including interference that may cause undesired operation. If this
equipment does cause harmful interference to radio, or television reception, which is
found by turning the equipment off and on, the user is encouraged to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and the device

Connect the equipment to an outlet other than the receiver’s

Consult a dealer or an experienced radio/TV technician for assistance

About NCE

NCE has been manufacturing DCC Products on an OEM basis since 1993. Originally
we offered only “chip sets” that contained software enabling other DCC
manufacturers to build DCC systems. As time went on some of those manufacturers
asked us to first supply partial assemblies then complete assemblies in addition to
the chip sets. This has helped NCE to grow into a full time electronic design and
manufacturing firm devoted entirely to the development and sale of products for the
control of model railroads. We build an amazing array of products for both our own
customers and other DCC manufacturers. We keep labor costs low by utilizing
modern automated robotic assembly for most products.

Our product designer is Jim Scorse. Jim models the Erie Railroad in O-Scale and
has a long history in model railroading. He has numerous patents in the area of digital
imaging, video and computer network data communications over noisy channels. Jim
is active in the Layout Design SIG as well as 30 years with the “Tuesday Night
Gang”, (round robin model railroad club) and is probably one of the only active model
railroaders among all the DCC manufacturers.

68

MENU NAVIGATION CHART 

- Part 2

Press PROG/ESC Key to cycle through menu listings, then press ENTER to cycle through listing choices

3 Register

Enter Register #

Enter Value

4 Paged

Programming

5 Direct

Programming

7 Recovery

Program

Factory

Reprogram?

6 NCE

Effects

Output #

Choose

effect

Direction

of Operation

Bulb or LED

2

ASSIGN

LOCO TO

CAB

Loco #

Cab #

3

SET

SYSTEM

CLOCK

Start/Stop

12/24

Hour

Hours

Minutes

Ratio

4

USE

PROGRAM

TRK

5

SET CMD

STATION

Version

# of Stop

Packets

# of Temp

Packets

# of Acc
Packets

# of Horn

off PKT

# of Prog

Packets

7

PROG ACCY

ON MAIN

Accy Address

Enter CV#

Enter Value

2 CV

Enter CV #

Enter Value

8 Decoder

Unlock

1 Standard

Manufacturer

Decoder

Version

Set Up Address

Set Config

Motor Control

Function Map

Set CV

Send Function

to Consist?

Consist Momentum

Enable

Momentum

button Multiplier

Momentum
Decel Rate

Function Refresh

Enable

Reset System?

6

SET CAB

PARAMS

Track Current

Recalls

Analog Horn

Channel

Analog Aux

Channel

Analog Bias

Assign Bell
to Function

69

MENU NAVIGATION CHART 

- Part 2

Press PROG/ESC Key to cycle through menu listings, then press ENTER to cycle through listing choices

4 Paged

Programming

5 Direct

Programming

7 Recovery

Program

Factory

Reprogram?

5

SET CMD

STATION

Version

# of Stop

Packets

# of Temp

Packets

# of Acc
Packets

# of Horn

off PKT

# of Prog

Packets

9

BROWSE

CONSISTS

7

PROG ACCY

ON MAIN

Accy Address

Enter CV#

Enter Value

0

PROG SIG

ON MAIN

Enter Signal #

Enter CV

Enter Value

8

PROGRAM

MACROS

Program

Enter Macro #

Enter Accy #

Enter N or R

Review

Enter Macro #

8 Decoder

Unlock

Send Function

to Consist?

Consist Momentum

Enable

Momentum

button Multiplier

Momentum
Decel Rate

Function Refresh

Enable

Reset System?

6

SET CAB

PARAMS

Track Current

Recalls

Analog Horn

Channel

Analog Aux

Channel

Analog Bias

Assign Bell
to Function

 

 

 

 

 

 

 

Content   ..  15  16  17  18   ..