Vauxhall Mokka (2016 year). Manual - part 5

 

  Index      Vauxhall     Vauxhall Mokka (2016 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     3      4      5      6     ..

 

 

Vauxhall Mokka (2016 year). Manual - part 5

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
73
Automatic wiping with rain sensor
Adjustable sensitivity of the rain
Windscreen washer
sensor
INT : automatic wiping with rain
Pull lever. Washer fluid is sprayed
sensor
Turn the adjuster wheel to adjust the
onto the windscreen and the wiper
sensitivity:
wipes a few times.
The rain sensor detects the amount of
low sensitivity
: turn adjuster
Washer fluid 3 167
water on the windscreen and
wheel downwards
automatically regulates the frequency
high sensitivity
: turn adjuster
of the windscreen wiper.
wheel upwards
Keep the sensor free from dust, dirt
and ice.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

74
Instruments and controls
Rear window wiper/washer
Outside temperature
Push lever. Washer fluid is sprayed
onto the rear window and the wiper
Press the rocker switch to activate the
wipes a few times.
A drop in temperature is indicated
rear window wiper:
immediately and a rise in temperature
Do not use if the rear window is
after a time delay.
upper switch
: continuous
frozen.
operation
If outside temperature drops to
Switch off in car washes.
lower switch
: intermittent
0.5 °C, a warning message is
The rear window wiper comes on
operation
displayed in the Driver Information
automatically when the windscreen
middle position
: off
Centre with Uplevel-Display or
wiper is switched on and reverse gear
Uplevel-Combi-Display.
is engaged.
Activation or deactivation of this
9 Warning
function can be changed in the menu
Settings in the Info-Display.
The road surface may already be
Washer fluid 3 167
icy even though the display
indicates a few degrees above 0
Vehicle personalisation 3 99.
°C.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
75
Set time format: Changes
Clock
indication of hours between 12 h
Date and time are shown in the
and 24 h.
Info-Display.
Set date format: Changes
Set date and time
indication of date between MM/
DD/YYYY and DD/MM/YYYY.
CD 400
Display clock: Switches on/off
Press CONFIG. The menu Settings is
indication of time on the display.
displayed.
RDS clock synchronization: The
Select Time Date.
RDS signal of most VHF
transmitters automatically sets
the time. RDS time
Notice
synchronisation can take a few
If RDS Auto Time Adjust is activated,
minutes. Some transmitters do
time and date are automatically set
not send a correct time signal. In
by the system.
such cases, it is recommended to
switch off automatic time
See Infotainment manual for further
synchronisation.
information.
Vehicle personalisation 3 99.
Set time
To adjust the time settings, select the
Time and date settings
Set Time menu item. Turn the
CD 600/Navi 950
multifunction knob to adjust the first
setting.
Selectable setting options:
Press CONFIG and then select the
Time and Date menu item to display
Press the multifunction knob to
● Set time: Changes the time
the respective submenu.
confirm the input. The coloured
shown on the display.
background moves to the next
● Set date: Changes the date
setting.
shown on the display.
Adjust all settings.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

76
Instruments and controls
Set date
Power outlets
To adjust the time settings, select the
Set Date menu item. Turn the
multifunction knob to adjust the first
setting.
Press the multifunction knob to
confirm the input. The coloured
background moves to the next
setting.
Adjust all settings.
Time format
To choose the desired time format,
Do not exceed the maximum power
select 12 hr / 24 hr Format. Activate
consumption of 150 watts.
12 Hour or 24 Hour.
A 12 Volt power outlet is located in the
With ignition off the power outlet is
front console.
Vehicle personalisation 3 99.
deactivated.
A further 12 Volt power outlet may be
Additionally the power outlet is
located in the rear centre console.
deactivated in the event of low battery
Do not exceed the maximum power
voltage.
consumption of 120 watts.
Electrical accessories that are
Depending on equipment, a 230 Volt
connected must comply with the
power outlet is located in the rear
electromagnetic compatibility
centre console.
requirements laid down in
DIN VDE 40 839.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
77
Warning lights, gauges
Odometer
Caution
and indicators
Do not connect any current
delivering accessories, e.g.
Speedometer
electrical charging devices or
batteries.
Do not damage the outlets by
using unsuitable plugs.
The bottom line displays the recorded
distance.
Indicates vehicle speed.
Trip odometer
The top line displays the recorded
distance since the last reset.
To reset, press SET/CLR on the turn
signal lever for a few seconds
3 88.
Trip odometer counts up to a distance
of 2000 miles then resets to 0.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

78
Instruments and controls
Because of the fuel remaining in the
Tachometer
Fuel gauge
tank, the top-up quantity may be less
than the specified tank capacity.
Fuel selector
Displays the engine speed.
Displays the level in the fuel or gas
tank depending on the operation
Drive in a low engine speed range for
mode.
each gear as much as possible.
The arrow indicates the vehicle side
Caution
where the fuel filler flap is located.
Press LPG to switch between petrol
and liquid gas operation. The LED in
Control indicator i illuminates if the
If the needle is in the red warning
the button shows the current
level in the tank is low. Refuel
zone, the maximum permitted
operating mode.
immediately if it flashes.
engine speed is exceeded. Engine
During liquid gas operation, the
at risk.
system automatically switches over to
petrol operation when gas tanks are
empty 3 78.
Never run fuel tank dry.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
79
LED off
: petrol operation
Engine coolant temperature
Caution
LED
: checking conditions for
gauge
flashes
fuel transition to liquid
If engine coolant temperature is
gas operation.
too high, stop vehicle, switch off
Illuminates if conditions
engine. Danger to engine. Check
are fulfilled.
coolant level.
LED illu-
: liquid gas operation
minates
LED
: liquid gas tank is empty
Service display
flashes
or failure in liquid gas
The engine oil life system lets you
five
system. A message is
know when to change the engine oil
times
displayed in the Driver
and filter. Based on driving
and
Information Centre.
conditions, the interval at which an
extin-
engine oil and filter change will be
guishes
indicated can vary considerably.
As soon as the liquid gas tank is
Displays the coolant temperature.
empty, petrol operation is
left area
: engine operating
automatically engaged until the
temperature not yet
ignition is switched off.
reached
Fuel for liquid gas operation 3 152.
central
: normal operating
area
temperature
right area
: temperature too high

-------------------------------------------------------------------------------------------------------------------------------------------------------------

80
Instruments and controls
In the Uplevel-Display and Uplevel-
Turn the adjuster wheel to select
ignition is switched on, most control
Combi-Display, the remaining oil life
Remaining Oil Life.
indicators will illuminate briefly as a
duration is displayed in the Vehicle
functionality test.
The system must be reset every time
Information Menu.
the engine oil is changed to ensure
The control indicator colours mean:
In the Midlevel-Display, the remaining
proper functionality. Seek the
red
: danger, important reminder
engine oil life duration is displayed by
assistance of a workshop.
yellow : warning, information, fault
control indicator I, therefore the
Press SET/CLR to reset. Therefore
green
: confirmation of activation
ignition must be switched on, with the
the ignition must be switched on, with
blue
: confirmation of activation
engine off.
the engine off.
white
: confirmation of activation
The menu and function can be
When the system has calculated that
selected via the buttons on the turn
engine oil life has been diminished,
signal lever.
Change Engine Oil Soon or a warning
To display the remaining engine oil
code appears in the Driver
life duration:
Information Centre. Have engine oil
and filter changed by a workshop
within one week or 300 miles
(whichever occurs first).
Driver Information Centre 3 88.
Service information 3 204.
Control indicators
The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. Depending on the
equipment, the position of the control
Press MENU to select the Vehicle
indicators may vary. When the
Information Menu.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
81
Control indicators in the instrument cluster

-------------------------------------------------------------------------------------------------------------------------------------------------------------

82
Instruments and controls
Control indicators in the centre
Z
Malfunction indicator light
k
Traction Control system off
console
3 84
3 86
g
Service vehicle soon 3 84
!
Preheating 3 86
R
Brake and clutch system
%
Diesel particle filter 3 86
3 84
w
Tyre pressure monitoring
-
Operate pedal 3 84
system 3 86
u
Antilock brake system (ABS)
I
Engine oil pressure 3 86
3 84
i
Low fuel 3 87
[
Upshift 3 85
d
Immobiliser 3 87
u
Descent control system
8
Exterior light 3 87
3 85
C
High beam 3 87
Overview
c
Power steering 3 85
f
Adaptive forward lighting
)
Lane departure warning
O Turn signal 3 83
3 87
3 85
X / Seat belt reminder 3 83
>
Fog light 3 88
k /
r
Ultrasonic parking assist
3 85
r
Rear fog light 3 88
v Airbag and belt tensioners
3 83
n
Electronic Stability Control off
m
Cruise control 3 88
3 85
V / Airbag deactivation 3 83
A
Vehicle detected ahead
b
Electronic Stability Control
3 88
and Traction Control system
p Charging system 3 84
3 86

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
83
Y
for rear seats illuminate in the
/ Bonnet open 3 88
9 Warning
Driver Information Centre.
h Door open 3 88
When the ignition is switched on, the
Have the cause of the fault
control indicator illuminates for
remedied immediately by a
several seconds.
Turn signal
workshop.
If seat belt becomes unfastened
O illuminates or flashes green.
when the vehicle is moving, the
Belt pretensioners, airbag system
control indicator illuminates.
3 39, 3 42.
Illuminates briefly
If the seat belt is fastened, the control
The parking lights are switched on.
indicator extinguishes.
Airbag deactivation
Flashes
Three-point seat belts 3 40.
V illuminates yellow.
A turn signal or the hazard warning
The front passenger airbag is
flashers are activated.
Airbag and belt tensioners
activated.
Rapid flashing: failure of a turn signal
v illuminates red.
* illuminates yellow.
light or associated fuse, failure of turn
When the ignition is switched on, the
The front passenger airbag is
signal light on trailer.
control indicator illuminates for a few
deactivated 3 47.
Bulb replacement 3 171, Fuses
seconds. If it does not illuminate,
3 178.
does not go out after a few seconds
9 Danger
or illuminates whilst driving, there is a
Turn signals 3 112.
fault in the airbag system. Seek the
Risk of fatal injury for a child using
assistance of a workshop. The
a child restraint system together
Seat belt reminder
airbags and belt pretensioners may
with activated front passenger
X for driver's seat illuminates or
fail to trigger in the event of an
airbag.
flashes red.
accident.
Risk of fatal injury for an adult
k for front passenger seat illuminates
Deployment of the belt pretensioners
person with deactivated front
or flashes red when seat is occupied.
or airbags is indicated by continuous
passenger airbag.
illumination of v.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

84
Instruments and controls
Charging system
Flashes when the engine is
9 Warning
running
p illuminates red.
Illuminates when the ignition is
Fault that could lead to catalytic
Stop. Do not continue your
switched on and extinguishes shortly
converter damage. Ease up on the
journey. Consult a workshop.
after the engine starts.
accelerator until the flashing stops.
Seek the assistance of a workshop
Illuminates when the manual parking
Illuminates when the engine is
immediately.
brake is applied and ignition is
running
switched on 3 135.
Stop, switch off engine. Battery is not
Service vehicle soon
charging. Engine cooling may be
Operate pedal
g
illuminates yellow.
interrupted. The brake servo unit may
- illuminates or flashes yellow.
Additionally a warning message or a
cease to be effective. Seek the
warning code is displayed.
assistance of a workshop.
Illuminates
The vehicle needs a service.
Clutch pedal must be depressed to
Seek the assistance of a workshop.
Malfunction indicator light
start the engine in Autostop mode.
Vehicle messages 3 93.
Stop-start system 3 126.
Z illuminates or flashes yellow.
Illuminates when the ignition is
Flashes
switched on and extinguishes shortly
Brake and clutch system
after the engine starts.
Clutch pedal must be depressed for a
R illuminates red.
main start of the engine 3 16, 3 125.
The brake and clutch fluid level is too
Illuminates when the engine is
low, when manual parking brake is
running
not applied 3 168.
Antilock brake system
Fault in the emission control system.
(ABS)
The permitted emission limits may be
u illuminates yellow.
exceeded. Seek the assistance of a
workshop immediately.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
85
Illuminates for a few seconds after the
Flashes
Flashes yellow
ignition is switched on. The system is
The system is activated.
System recognises an unintended
ready for operation when the control
lane change.
indicator extinguishes.
If the control indicator does not
Power steering
extinguish after a few seconds, or if it
Ultrasonic parking assist
c illuminates yellow.
illuminates while driving, there is a
r
illuminates yellow.
It illuminates when the ignition is
fault in the ABS. The brake system
switched on and extinguishes shortly
Fault in system
remains operational but without ABS
after the engine starts.
regulation.
or
If the indicator does not extinguish
Antilock brake system 3 135.
Fault due to sensors that are dirty or
after a few seconds, or if it illuminates
covered by ice or snow
while driving, there is a failure in the
or
Upshift
power steering system.
Interference due to external sources
[ illuminates green or is shown as a
Seek the assistance of a workshop.
of ultrasound. Once the source of
symbol in the Driver Information
interference is removed, the system
Centre with Uplevel-Display or
Lane departure warning
will operate normally.
Uplevel-Combi-Display when
) illuminates green or yellow or
Have the cause of the fault in the
upshifting is recommended for fuel
saving reasons.
flashes yellow.
system remedied by a workshop.
ECO drive assistant 3 96.
Ultrasonic parking assist 3 143.
Illuminates green
System is switched on and ready to
Descent control system
Electronic Stability Control
operate.
u illuminates or flashes green.
off
Illuminates yellow
Descent control system 3 138
n illuminates yellow.
Failure in the system. Seek the
The system is deactivated.
Illuminates
assistance of a workshop.
The system is ready for operation.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

86
Instruments and controls
Electronic Stability Control
Preheating
Tyre pressure monitoring
and Traction Control system
! illuminates yellow.
system
b illuminates or flashes yellow.
Preheating of diesel engine is
w illuminates or flashes yellow.
activated. Only activates when
Illuminates
outside temperature is low.
Illuminates
A fault in the system is present.
Tyre pressure loss. Stop immediately
Continued driving is possible. Driving
Diesel particle filter
and check tyre pressure.
stability, however, may deteriorate
% illuminates or flashes yellow.
depending on road surface
Flashes
conditions.
The diesel particle filter requires
Fault in system or tyre without
cleaning.
Have the cause of the fault remedied
pressure sensor mounted (e.g. spare
by a workshop.
Continue driving until %
wheel). After 60-90 seconds the
extinguishes. If possible, do not allow
control indicator illuminates
Flashes
engine speed to drop below
continuously. Consult a workshop.
2000 rpm.
The system is actively engaged.
Tyre pressure monitor system
Engine output may be reduced and
Illuminates
3 185.
the vehicle may be braked
automatically to a small degree.
The diesel particle filter is full. Start
Engine oil pressure
cleaning process as soon as
Electronic Stability Control 3 137,
possible.
I illuminates red.
Traction Control system 3 136.
Illuminates when the ignition is
Flashes
switched on and extinguishes shortly
Traction Control system off
The maximum filling level of the filter
after the engine starts.
k illuminates yellow.
is reached. Start cleaning process
immediately to avoid damage to the
The system is deactivated.
engine.
Diesel particle filter 3 129, Stop-start
system 3 126.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
87
Illuminates when the engine is
Have the cause of the fault remedied
Do not remove key until vehicle is
running
by a repairer.
stationary, otherwise the steering
wheel lock could engage
Caution
unexpectedly.
Exterior light
8 illuminates green.
Engine lubrication may be
Check oil level before seeking the
The exterior lights are on 3 106.
interrupted. This may result in
assistance of a workshop 3 165.
damage to the engine and/or
locking of the drive wheels.
High beam
Low fuel
C illuminates blue.
1. Depress clutch.
i illuminates or flashes yellow.
Illuminates when high beam is on or
2. Select neutral gear, set selector
Illuminates
during headlight flash 3 107, or when
lever to N.
high beam is on with high beam
Level in fuel tank is too low.
3. Move out of the flow of traffic as
assist, adaptive forward lighting
quickly as possible without
Flashes
3 109.
impeding other vehicles.
Fuel used up. Refuel immediately.
4. Switch off ignition.
Never run the tank dry.
Adaptive forward lighting
9 Warning
Refuelling 3 154.
f illuminates or flashes yellow.
Catalytic converter 3 130.
Illuminates
When the engine is off,
Bleeding the diesel fuel system
considerably more force is needed
The adaptive forward lighting system
3 170.
to brake and steer. During an
needs a service.
Autostop the brake servo unit will
Seek the assistance of a workshop.
still be operational.
Immobiliser
Adaptive forward lighting 3 109.
d flashes yellow.
Fault in the immobiliser system. The
engine cannot be started.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

88
Instruments and controls
Flashes
Cruise control 3 139.
Information displays
System switched to symmetrical low
beam.
Vehicle detected ahead
Driver Information Centre
Control indicator f flashes for approx.
A illuminates green.
The Driver Information Centre is
4 seconds after the ignition is
located in the instrument cluster
A vehicle ahead is detected in the
switched on as a reminder that the
between speedometer and
same lane.
system has been activated 3 108.
tachometer. It is available as
Forward collision alert 3 141.
Midlevel-Display, Uplevel-Display or
Automatic light control 3 107.
Uplevel-Combi-Display.
Bonnet open
Fog light
/ illuminates when the bonnet is
> illuminates green.
open on vehicles with stop-start
The front fog lights are on 3 112.
system.
Stop-start system 3 126.
Rear fog light
r illuminates yellow.
Door open
The rear fog light is on 3 112.
h illuminates red.
A door or the tailgate is open.
Cruise control
m illuminates white or green.
Midlevel-Display indicates:
Illuminates white
● overall odometer
● trip odometer
The system is on.
● some control indicators
Illuminates green
● vehicle information
Cruise control is active.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instruments and controls
89
● trip/fuel information
Selecting menus and functions
● vehicle messages, displayed as
The menus and functions can be
code numbers 3 93
selected via the buttons on the turn
signal lever.
In the Uplevel-Combi-Display, menu
pages can be selected by pressing
MENU on the turn signal lever. Menu
symbols are indicated in the top line
In the Uplevel-Display the following
of the display:
main menus can be selected by
X
Vehicle Information Menu
Press MENU to switch between the
pressing MENU on the turn signal
menus or to return from a submenu to
lever:
W
Trip/Fuel Information Menu
the next higher menu level.
● Vehicle Information Menu
s
ECO Information Menu
● Trip/Fuel Information Menu
Some of the displayed functions differ
when the vehicle is being driven or at
a standstill. Some functions are only
available when the vehicle is being
driven.
Vehicle personalisation 3 99.
Memorised settings 3 21.

 

 

 

 

 

 

 

Content      ..     3      4      5      6     ..