Vauxhall Insignia (2016 year). Manual - part 12

 

  Index      Vauxhall     Vauxhall Insignia (2016 year) - manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     10      11      12      13     ..

 

 

Vauxhall Insignia (2016 year). Manual - part 12

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

192
Driving and operating
to a preceding moving vehicle gets
Settings
too small or when approaching
Settings can be changed in the
another vehicle too rapidly.
vehicle personalisation menu in the
Colour-Info-Display.
Caution
Select the relevant setting in Settings,
The colour lighting of this control
I Vehicle in the Colour-Info-Display.
indicator does not correspond to
Colour-Info-Display 3 117.
local traffic laws on following
Vehicle personalisation 3 121.
distance. The driver bears full
responsibility for maintaining safe
Forward collision alert based on
following distance according to
front camera system
applicable traffic rules, weather
Note that the alert timing sensitivity
and road conditions etc. at all
Forward collision alert uses the front
setting is shared with the following
times.
camera system in the windscreen to
distance setting of the adaptive cruise
detect a vehicle directly ahead, in
control 3 183. So changing the alert
your path, within a distance of approx.
timing sensitivity changes the
60 metres.
adaptive cruise control following
distance setting.
Activation
Forward collision alert operates
Alerting the driver
automatically above 25 mph, if it is not
A green illuminated vehicle ahead
deactivated by pressing V, see
control indicator A illuminates in the
If a collision is imminent the collision
below.
instrument cluster when the system
alert symbol pops-up in the Driver
has detected a vehicle in the driving
Information Centre and a warning
Selecting the alert sensitivity
path. The control indicator A
chime sounds. Depress the brake
The alert sensitivity can be set to
changes to yellow when the distance
pedal, if it is required by the situation.
near, medium or far.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

193
Driving and operating
Alerting the driver
General information for both
A green illuminated vehicle ahead
variants of forward collision alert
control indicator A illuminates in the
instrument cluster when the system
9 Warning
has detected a vehicle in the driving
path.
Forward collision alert is just a
warning system and does not
apply the brakes. When
approaching a vehicle ahead too
rapidly, it may not provide you
enough time to avoid a collision.
The driver accepts full
Press V, the current setting is shown
responsibility for the appropriate
in the Driver Information Centre.
When the distance to a preceding
following distance based on traffic,
Press V again to change the alert
moving vehicle gets too small or when
weather and visibility conditions.
approaching another vehicle too
sensitivity.
The complete attention of the
rapidly and a collision is imminent, the
driver is always required while
collision alert symbol pops-up in the
driving. The driver must always be
Driver Information Centre.
ready to take action and apply the
Simultaneously, a warning chime
brakes.
sounds. Depress the brake pedal, if it
is required by the situation.
System limitations
The system is designed to warn only
Deactivation
for vehicles, but may react also to
The system can be deactivated.
other metallic objects.
Press V repeatedly until Forward
Collision Alert Off appears in the
Driver Information Centre.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

194
Driving and operating
In the following cases, forward
On Baselevel display set Settings
Active emergency braking
collision alert may not detect a vehicle
X
with the Menu button and select
Active emergency braking can help to
ahead or sensor performance may be
Following distance indication via the
reduce the damage from crashes with
limited:
adjuster wheel on the turn signal lever
vehicles and obstacles directly
3 110.
● on winding roads
ahead, when a collision can no longer
● when weather limits visibility,
be avoided either by manual braking
e.g. fog, rain, or snow
or by steering. Before the active
emergency braking applies, the driver
● when the sensor is blocked by
is warned by the forward collision
snow, ice, slush, mud, dirt, or
alert 3 190.
windscreen damage
The feature uses various inputs (e.g.
radar sensor, brake pressure, vehicle
Following distance
speed) to calculate the probability of
indication
a frontal collision.
The following distance indication
Active emergency braking operates
displays the distance to a preceding
automatically above walking speed,
moving vehicle. The system uses,
provided that Auto Collision
depending on the vehicle equipment,
On Midlevel or Uplevel display, select
Preparation setting is not deactivated
either the radar behind the radiator
Info menu and press o to select
in the vehicle personalisation menu
grille or the front camera in the
Following distance indication 3 110.
3 121.
windscreen to detect the distance of
The minimum indicated distance is
The system includes:
a vehicle directly ahead in your lane.
It is active at speeds above 25 mph.
0.5 seconds.
● brake preparation system
When a preceding vehicle is detected
If there is no vehicle ahead or the
● emergency automatic braking
vehicle ahead is out of range, two
ahead, the distance is indicated in
● forward looking brake assist
dashes will be displayed: -.- s.
seconds, displayed on a page in the
Driver Information Centre 3 110.
If Adaptive cruise control is active,
this page shows the following
distance setting instead 3 183.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
195
Below a speed of 11 mph the system
The complete attention of the
9 Warning
can apply full braking.
driver is always required while
This system is not intended to
driving. The driver shall always be
Forward looking brake assist
replace the driver responsibility for
ready to take action and apply the
driving the vehicle and looking
In addition to the brake preparation
brakes and steer to avoid
ahead. Its function is limited to
system and emergency automatic
collisions. The system is designed
supplemental use only. The driver
braking, the forward looking brake
to work with all occupants wearing
must continue to apply the brake
assist function makes the brake assist
their seat belts.
pedal as the driving situation
more sensitive. Therefore,
dictates.
depressing the brake pedal less
System limitations
strongly results in immediate hard
The active emergency braking has
braking. This function helps the driver
limited or no function during rain,
Brake preparation system
brake quicker and harder before the
snow or heavy dirt, as the radar
When approaching a vehicle ahead
imminent collision.
sensor can be covered by a water
so quickly that a collision is likely, the
film, dust, ice or snow. In case of
brake preparation system slightly
9 Warning
sensor blockage, clean the sensor
pressurises the brakes. This reduces
cover.
the response time, when a manual or
Active emergency braking is not
In some cases, the active emergency
automatic braking is requested.
designed to apply hard
braking system may provide an
The brake system is prepared so that
autonomous braking or to
automatic braking in situations that
braking can occur more rapidly.
automatically avoid a collision. It is
seem to be unnecessary, for instance
designed to reduce the vehicle
in parking garages, due to traffic signs
Emergency automatic braking
speed before a collision. It may not
in a curve or due to vehicles in
react for stopped vehicles,
After the brake preparation and just
another lane. This is normal
pedestrians or animals. After a
before the imminent collision, this
operation, the vehicle does not need
sudden lane change, the system
function automatically applies limited
service. Firmly apply the accelerator
needs a certain time to detect the
braking to reduce the impact speed of
pedal to override the automatic
next preceding vehicle.
the collision.
braking.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

196
Driving and operating
Settings
If the system does not work as it
Front-rear parking assist
should do, vehicle messages are
Settings can be changed in the
displayed in the Driver Information
vehicle personalisation menu in the
Centre.
Colour-Info-Display.
Vehicle messages 3 119.
Select the relevant setting in Settings,
I Vehicle in the Colour-Info-Display.
Parking assist
Colour-Info-Display 3 117.
Vehicle personalisation 3 121.
9 Warning
Fault
The driver bears full responsibility
In the event of a system service
for the parking manoeuvre.
requirement, a message is displayed
Always check the surrounding
in the Driver Information Centre.
area when driving backwards or
The front-rear parking assist
forwards while using parking
measures the distance between the
assist system.
vehicle and obstacles in front and
behind the vehicle. The system gives
acoustic signals and display
messages.
The system has four ultrasonic
parking sensors each in the rear and
front bumper.
It uses two different acoustic warning
signals for the front and rear
monitoring areas, each with a
different tone frequency. The signal

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
197
for front obstacles sounds via the
If the vehicle exceeds a speed of
front speakers, for rear obstacles it
7 mph, the front parking assist is
sounds from the rear of the vehicle.
deactivated. The front parking assist
is always reactivated when vehicle
Activation
speed drops below 7 mph.
When reverse gear is engaged, the
front and rear parking assist is ready
Indication
to operate.
The system warns the driver with
acoustic signals against potentially
The front parking assist is also
hazardous obstacles behind and in
activated automatically at a speed up
front of the vehicle. Depending on
to 7 mph.
which side of the vehicle is closer to
an obstacle, you will hear acoustic
The distance to a front and rear
warning signals on the respective
obstacle is indicated by changing
side of the vehicle. The interval
distance lines around the vehicle.
between the sounds becomes shorter
as the vehicle gets closer to that
Rear obstacles are indicated
obstacle. When the distance is less
acoustically and visually at the same
than approx. 30 cm, the sound is
time.
continuous.
Front obstacles are indicated visually
Additionally, the distance to obstacles
first. At distances less than 80 cm an
is shown in the Driver Information
acoustic signal also sounds.
Centre 3 110.
The distance indication in the Driver
Information Centre can be inhibited
An illuminated LED in the parking
by vehicle messages with a higher
assist button
r
indicates that the
priority. After approving the message
system is ready to operate.
by pressing SET/CLR on the turn
signal lever or 9 on right steering
wheel control, distance indication
appears again.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

198
Driving and operating
Deactivation
After a manual deactivation, the front
The rear parking assist automatically
parking assist is activated again if the
switches off when reverse gear is
parking assist button
r
is pressed
disengaged.
or if reverse gear is engaged.
The front parking assist is deactivated
Fault
automatically at a speed above
In the event of a fault in the system or
7 mph.
if the system does not work due to
temporary conditions, e.g. ice
covered sensors, a message is
displayed in the Driver Information
Centre.
Vehicle messages 3 119.
The advanced parking assist system
manoeuvres the driver into a parking
Advanced parking assist
slot by giving instructions on the
Driver Information Centre and
9 Warning
acoustic signals. The driver must
control acceleration, braking, steering
The driver bears full responsibility
and gear shifting.
for accepting the parking slot
The system uses the sensors of the
suggested by the system and the
Manual deactivation is possible by
parking assist system in combination
parking manoeuvre.
pressing the parking assist button
with two additional sensors on both
r
briefly.
Always check the surrounding
sides of the front and rear bumper.
area in all directions when using
When the system is deactivated, the
advanced parking assist.
LED in the button extinguishes.
Additionally, Park Assist Off pops-up
in the Driver Information Centre when
the system is deactivated manually.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
199
Activation
Functionality
The parking slot suggestion of the
system is accepted when the vehicle
When searching for a parking slot, the
When the vehicle passes a row of
is stopped by the driver within
system is ready to operate by
cars and the system is activated, the
10 metres after the "Stop" message is
pressing button (.
advanced parking assist system
given. The system calculates the
begins looking for a suitable parking
The system can only be activated at
optimal route into the parking slot.
slot. When a suitable slot is detected,
a speed up to 18 mph and the system
Then it manoeuvres the driver into the
a visual feedback and acoustic
searches for a parking slot at a speed
slot by giving detailed instructions.
signals are given in the Driver
up to 18 mph.
Information Centre.
The maximum allowed parallel
If the driver does not stop the vehicle
distance between the vehicle and a
within 10 metres after a parking slot is
row of parked cars is 1.8 metres.
proposed, the system starts to search
for another suitable parking slot.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

200
Driving and operating
Display priorities
After activating the advanced parking
assist, a message appears in the
Driver Information Centre. Advanced
parking assist indication in the Driver
Information Centre can be inhibited
by vehicle messages with a higher
priority. After approving the message
by pressing SET/CLR on the turn
signal lever or the 9 button in the
steering wheel controls, advanced
parking assist instructions appear
again and the parking manoeuvre can
The instructions in the display show:
A successful parking manoeuvre is
be continued.
indicated by the End position
A hint when driving faster than
message.
18 mph.
Deactivation
Always pay attention to the sound of
The system is deactivated by:
The demand to stop the vehicle,
the front-rear parking assist.
when a parking slot is detected.
● pressing (
Continuous sound means that the
The direction of driving during the
● parking manoeuvre successfully
distance to an obstacle is less than
parking manoeuvre.
ended
approx. 30 cm.
The steering wheel position
● driving faster than 18 mph
during parking.
Changing the parking side
● switching off the ignition
The system is configured to detect
For some of the instructions a
parking slots on the passenger side.
Notice
progress bar is shown.
To detect parking slots on the driver
If advanced parking assist is
side, press ( for approx. 2 seconds.
deactivated manually or by the
system (e.g. parking manoeuvre
ended), the front and rear parking
assist is also deactivated.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
201
Reactivate front and rear parking
Basic notes on using parking
assist by pressing parking assist
assist systems
button
r
or engaging reverse gear
once.
9 Warning
Deactivation by the driver or by the
system during manoeuvring will be
Under certain circumstances,
indicated by Parking Deactivated in
various reflective surfaces on
the Driver Information Centre.
objects or clothing as well as
external noise sources may cause
Fault
the system to fail to detect
A message appears in the Driver
obstacles.
Information Centre when:
Special attention must be paid to
● There is a fault in the system.
If an object is detected during parking
low obstacles which can damage
instructions, Stop is indicated in the
the lower part of the bumper.
● The driver did not successfully
Driver Information Centre. Removing
complete the parking
the object will resume the parking
manoeuvre.
manoeuvre. If the object is not
Caution
● The system is not operational.
removed, the system will be
deactivated. Press ( to activate the
Performance of the system can be
reduced when sensors are
system and search for a new parking
covered, e.g. by ice or snow.
slot.
Performance of the parking assist
system can be reduced due to
heavy loading.
Special conditions apply if there
are taller vehicles in the vicinity
(e.g. off-road vehicles, mini vans,
vans). Object identification and

-------------------------------------------------------------------------------------------------------------------------------------------------------------

202
Driving and operating
Advanced parking assist system
correct distance indication in the
9 Warning
may not respond to changes in the
upper part of these vehicles
parking space after initiating a
cannot be guaranteed.
Side blind spot alert does not
parallel parking manoeuvre.
Objects with a very small reflection
replace driver vision.
Notice
cross-section, e.g. objects of
The system does not detect:
After production, the system
narrow size or soft materials, may
requires a calibration. For optimal
● vehicles outside the side blind
not be detected by the system.
parking guidance, a driving distance
zones which may be rapidly
Parking assist systems do not
approaching
of at least 22 miles, including a
detect objects outside the
number of bends, is required.
● pedestrians, cyclists or animals
detection range.
Before changing a lane, always
Side blind spot alert
Notice
check all mirrors, look over the
The side blind spot alert system
The parking assist system can be
shoulder and use the turn signal.
detects and reports objects on either
activated and deactivated by
side of the vehicle, within a specified
changing the settings in the
When the system detects a vehicle in
"blind spot" zone. The system alerts
Info-Display.
the side blind zone while driving
visually in each exterior mirror, when
forwards, either while passing a
Vehicle personalisation 3 121.
detecting objects that may not be
vehicle or being passed, the yellow
visible in the interior and exterior
Notice
warning symbol B will illuminate in
mirrors.
The parking assist system
the relevant exterior mirror. If the
automatically detects factory-fitted
The system's sensors are located in
driver then activates the turn signal,
towing equipment. It is deactivated
the bumper on the left and right side
the warning symbol B starts flashing
when the connector is plugged in.
of the vehicle.
yellow as a warning not to change
It is possible that the sensor detects
lanes.
a non-existing object (echo
disturbance) caused by external
acoustical or mechanic
disturbances.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
203
Notice
by approx. 3 metres. The height of the
If the passing vehicle is at least
zone is between approx.0.5 metres
6 mph faster than the passed
and 2 metres off the ground.
vehicle, the warning symbol B in the
The system is deactivated if the
relevant exterior mirror may not
vehicle is towing a trailer.
illuminate.
Side blind spot alert is designed to
ignore stationary objects such as
guardrails, posts, curbs, walls and
beams. Parked vehicles or oncoming
vehicles are not detected.
Fault
The system can be activated or
Occasional missed alerts can occur
deactivated in the vehicle
under normal circumstances.
personalisation.
Side blind spot alert does not operate
Select the relevant setting in Settings,
when the left or right corners of the
I Vehicle in the Colour-Info-Display.
rear bumper are covered with mud,
Colour-Info-Display 3 117.
dirt, snow, ice, slush, or in heavy
When the vehicle is started, both
rainstorms. Cleaning instructions
Vehicle personalisation 3 121.
exterior mirror displays will briefly
3 270.
Deactivation is indicated by a
come on to indicate that the system is
message in the Driver Information
In the event of a fault in the system or
operating.
Centre.
if the system does not work due to
If the vehicle is equipped with lane
temporary conditions, a message is
change alert 3 204, the symbol
F
Detection zones
displayed in the Driver Information
is displayed in the mirrors.
Centre. Seek the assistance of a
The system sensor covers a zone of
workshop.
approx. 3.5 metres on both sides of
the vehicle. This zone starts at each
exterior mirror and extends rearwards

-------------------------------------------------------------------------------------------------------------------------------------------------------------

204
Driving and operating
mirror. If the driver then activates the
Detection zones
Lane change alert
turn signal, the warning symbol
F
Additional to the side blind spot alert
starts flashing amber as a warning not
3 202, lane change alert recognizes
to change lanes.
rapidly approaching vehicles from
behind on parallel lanes next to your
vehicle.
If the vehicle is equipped with lane
change alert, side blind spot alert is
always included.
The system alerts visually in each
exterior mirror when detecting rapidly
approaching vehicles from behind.
The radar distance sensors are
The system sensors cover a zone of
located in the rear bumper.
approx. 3.5 metres parallel on both
vehicle sides and approx. 3 metres
9 Warning
When the vehicle is started, both
rearwards on side blind zone alert
exterior mirror displays will briefly
(A) and approx. 70 metres rearwards
Lane change alert does not
come on to indicate that the system is
on lane change alert (B) on parallel
replace driver vision.
operating.
lanes. The zones start at each
Before changing a lane, always
exterior mirror. The height of the zone
check all mirrors, look over the
is approx. between 0.5 metres and
shoulder and use the turn signal.
2 metres off the ground.
When the system detects an
Deactivation
approaching vehicle from behind
Activation or deactivation of the lane
which drives considerably faster, the
change alert can be set in the vehicle
amber warning symbol
F
will
personalisation menu in the Colour-
illuminate in the relevant exterior
Info-Display.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
205
Select the relevant setting in Settings,
the system may light up due to
9 Warning
I Vehicle in the Colour-Info-Display.
guardrails, signs, trees, shrubs or
other immobile objects. This is normal
Colour-Info-Display 3 117.
The rear view camera does not
operation and the system does not
Vehicle personalisation 3 121.
replace driver vision. Note that
need to be serviced.
objects that are outside the
The system is deactivated if the
Lane change alert may not operate
camera's field of view and the
vehicle is towing a trailer.
when the left or right corners of the
advanced parking assist sensors,
Deactivation is indicated by a
rear bumper are covered with mud,
e.g. below the bumper or
message in the Driver Information
dirt, snow, ice or slush. Cleaning
underneath the vehicle, are not
Centre.
instructions 3 270.
displayed.
Notice
In the event of a fault in the system or
Do not reverse the vehicle by only
After production, the system
if the system does not work due to
looking at the Info-Display and
requires a calibration. For optimal
temporary conditions, a message is
check the surrounding area
performance, drive as soon as
displayed in the Driver Information
behind and around the vehicle
possible on a straight highway road
Centre. Seek the assistance of a
before reversing.
with roadside objects, e.g. guardrails
workshop.
and barriers for some distance.
Activation
Fault
Rear view camera
Rear view camera is automatically
The rear view camera assists the
activated when reverse gear is
Occasional missed alerts can occur
driver when reversing, by displaying a
engaged.
under normal circumstances or in
view of the area behind the vehicle.
sharp curves. The system can
temporarily alert of objects in the blind
The view of the camera is displayed
spot at specific weather conditions
in the Colour-Info-Display.
(rain, hail etc). Driving on a wet road
or in the transitions from a dry area to
a wet area can cause the system to
light up, as water splash can be
interpreted as an object. Otherwise

-------------------------------------------------------------------------------------------------------------------------------------------------------------

206
Driving and operating
Functionality
Due to the high position of the camera
The function can be deactivated in the
the rear bumper can be seen on the
vehicle personalisation menu in the
display as a guide to position.
Colour-Info-Display.
The area displayed by the camera is
Select the relevant setting in Settings,
limited. The distance of the image that
I Vehicle in the Colour-Info-Display.
appears on the display differs from
Colour-Info-Display 3 117.
the actual distance.
Vehicle personalisation 3 121.
Guiding lines
Warning symbols
Dynamic guiding lines are horizontal
Warning symbols are indicated as
lines in 1 metre intervals projected on
triangles 9 on the picture which show
the picture to define the distance to
obstacles detected by the rear
shown objects.
sensors of the advanced parking
assist.
The camera is mounted between the
number plate lights and has a viewing
Additionally 9 appears on the top line
angle of 130°.
of the Info-Display with the warning to
check the vehicle surrounding.
Deactivation
The camera is deactivated when a
certain forward speed is exceeded or
if reverse gear is not engaged for
approx. 10 seconds.
Activation or deactivation of the rear
view camera can be set in the vehicle
Trajectory lane of the vehicle is
personalisation menu in the Colour-
shown in accordance with the
Info-Display.
steering angle.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Driving and operating
207
Select the relevant setting in Settings,
Rear cross traffic alert
9 Warning
I Vehicle in the Colour-Info-Display.
Colour-Info-Display 3 117.
Additional to the rear view camera
The rear cross traffic alert does not
Vehicle personalisation 3 121.
3 205, rear cross traffic alert warns of
replace driver vision. Note that
cross traffic from left or right side
objects that are outside sensors,
Fault
when driving rearwards. When cross
e.g. below the bumper or
traffic is recognized and the rear view
underneath the vehicle, are not
Fault messages are displayed with a
camera is activated, a warning
displayed.
9 on the top line of the Info-Display.
triangle with a direction arrow K
Pedestrians, children or animals
The rear view camera may not
appears on the Colour-Info-Display,
are not detected.
operate properly when:
showing the direction of the traffic.
Do not reverse the vehicle by only
The surrounding is dark.
Furthermore, three beeps will sound
looking at the Info-Display and
from the speaker on the respective
The sun or the beam of
check the surrounding behind and
side.
headlights is shining directly into
around the vehicle before
the camera lens.
reversing.
Ice, snow, mud, or anything else
covers the camera lens. Clean
Activation
the lens, rinse it with water, and
Rear cross traffic alert is
wipe it with a soft cloth.
automatically activated together with
The tailgate is not closed
the rear view camera when reverse
correctly.
gear is engaged.
The vehicle is towing a trailer.
The vehicle had a rear end
accident.
There are extreme temperature
changes.
The radar distance sensors are
located sideways in the rear bumper.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

208
Driving and operating
Detection zones
Select the relevant setting in Settings,
I Vehicle in the Colour-Info-Display.
Colour-Info-Display 3 117.
Vehicle personalisation 3 121.
Fault
Traffic signs, which will be detected,
The system may not operate properly
are:
when:
Limit- and no passing signs
● Ice, snow, mud, or anything else
● speed limit
covers the sensors.
● no passing
● The vehicle is towing a trailer.
● end of speed limit
● The vehicle had a rear end
accident.
● end of no passing
The system sensors cover a zone of
approx. 20 metres to the left or right
● There are extreme temperature
Road signs
side behind the vehicle.
changes.
Beginning and end of:
● motorways
Deactivation
Traffic sign assistant
● A-roads
Rear cross traffic alert is deactivated
● play streets
together with the rear view camera
Functionality
when a certain forward speed is
Add on signs
The traffic sign assistant system
exceeded or if reverse gear is not
● additional hints to traffic signs
detects designated traffic signs via a
engaged for approx. 10 seconds.
front camera and displays them in the
● restriction of trailer towing
Activation or deactivation of the rear
Driver Information Centre.
● tractor constraints
cross traffic alert can be set in the
● wet warning
vehicle personalisation menu in the
Colour-Info-Display.
● ice warning
● direction arrows

 

 

 

 

 

 

 

Content      ..     10      11      12      13     ..