Vauxhall Corsa (2016 year). Manual

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Seats, restraints

ISOFIX size class and seat device

A - ISO/F3

: forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg

B - ISO/F2

: forward-facing child restraint system for smaller children in the weight class 9 to 18 kg

B1 - ISO/F2X

: forward-facing child restraint system for smaller children in the weight class 9 to 18 kg

C - ISO/R3

: rear-facing child restraint system for children of maximum size in the weight class up to 18 kg

D - ISO/R2

: rear-facing child restraint system for smaller children in the weight class up to 18 kg

E - ISO/R1

: rear-facing child restraint system for young children in the weight class up to 13 kg

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Seats, restraints

ISOFIX mounting brackets on the

ISOFIX child restraint

Top-tether fastening eyes

rear seats are indicated by the

systems

In addition to the ISOFIX mounting,

ISOFIX logo on the backrest.

fasten the Top-tether strap to the

Fasten vehicle-approved ISOFIX

Open the flaps of the guides before

Top-tether fastening eyes.

child restraint systems to the ISOFIX

mounting a child restraint system.

mounting brackets. Specific vehicle

ISOFIX child restraint systems of

After removing the child restraint

ISOFIX child restraint system

universal category positions are

system, close the flaps.

positions are marked in the table by

marked in the table by IUF.

IL.

ISOFIX child restraint systems on

Top-tether fastening eye on rear

The vehicle is equipped with guides in

front passenger seat

seats

the backrests to support the

installation of the child restraint

The vehicle has two fastening eyes

system.

on the back of the rear seats.

Top-tether fastening eyes are marked

ISOFIX child restraint systems on

with the symbol : for a child seat.

rear seats

Place the child restraint system in the

centre of the seat and push

backwards. Make sure that the child

restraint system is engaged properly.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Pull lever to open the glovebox cover.

Storage

Storage compartments

The glovebox features a coin holder

and an adapter for the locking wheel

9 Warning

bolts.

Storage compartments

The glovebox should be closed whilst

Glovebox

Do not store heavy or sharp

driving.

Cupholders

objects in the storage

Front storage

compartments. Otherwise, the

Underseat storage

storage compartment lid could

Cupholders

Rear carrier system

open and vehicle occupants could

be injured by objects being thrown

Load compartment

around in the event of hard

Load compartment cover

braking, a sudden change in

Rear floor storage cover

direction or an accident.

Lashing eyes

Warning triangle

First aid kit

Glovebox

Roof rack system

Roof rack

Loading information

Cupholders are located in the centre

console.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

A movable rubber strap is located in

the storage compartment in front of

the gear selector lever. Pull out the

strap to fix a cup or ashtray.

Front storage

Additional bottleholders are located in

the rear side panels.

Flexible cupholder strap

Storage compartments are located

below the light switch, in the centre

console, in the door pockets and in

the side panels near the rear seats.

The pockets in the doors are

designed to carry bottles.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

There must not be any objects on the

Underseat storage

Rear carrier system

bicycles that could become loose

during transportation.

Caution

Do not attach bicycles with carbon

pedal cranks to bicycle carriers.

The bicycles may get damaged.

Extending

Open the tailgate.

9 Warning

Lift at recessed edge and pull out.

The rear carrier system (Flex-Fix

Maximum load: 1.5 kg. To close, push

system) allows bicycles to be

No people may remain in the

in and engage.

attached to a pull-out carrier

extension zone of the rear carrier

integrated into the vehicle floor. The

system, risk of injury.

transportation of other objects is not

permitted.

The maximum load of the rear carrier

system is 40 kg. The maximum load

per bicycle is 20 kg.

The wheelbase of a bicycle must not

exceed 1.2 metres. Otherwise the

secure fastening of a bicycle is not

possible.

If not in use, the carrier system can be

slid back into the vehicle floor.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Completely pull out the rear carrier

Install the tail lamps

system until you hear it engage.

Ensure that it is not possible to push

in the rear carrier system without

pulling the release lever again.

9 Warning

It is only permissible to fit objects

to the rear carrier system if the

system has been correctly

engaged. If the rear carrier system

Pull release lever up. The system

will not engage correctly, do not fit

disengages and travels quickly out of

objects to the system and slide the

system back. Seek the assistance

First remove the rear (1), then the

the bumper.

of a workshop.

front (2) tail lamp from the recesses.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Open out the lamp support on the

Swivel the left clamping lever (1) first,

back of the tail lamp completely until

followed by the right clamping lever

it engages.

(2) until they stop. Both clamping

levers must point backwards,

otherwise safe functionality is not

guaranteed.

Notice

Close the tailgate.

Unfold pedal crank recesses

Check the cable and lamp position to

ensure these are correctly installed

and are securely located.

Push the clamping lever down and

Lock the rear carrier system

push the lamp support into the

retainer until it engages.

Perform this procedure for both tail

lamps.

Fold one or both pedal crank

recesses upwards until the diagonal

support engages.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Press the release lever and withdraw

Prepare the bicycle for

the wheel recesses.

attachment

Remove the pedal crank mounts from

the pedal crank recesses.

Adapting the rear carrier system

Push the release lever on the strap

Notice

retainer and remove the strap

The maximum width for the pedal

to a bicycle

retainer.

crank is 38.3 mm and the maximum

depth is 14.4 mm.

Rotate the left pedal (without a chain

cog) vertically downwards. The pedal

on the left pedal crank must be

horizontal.

The front bicycle must have its front

wheel facing left.

The rear bicycle must have its front

wheel facing right.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Attaching a bicycle to the rear

Put on the bicycle. The pedal crank

carrier system

here must be placed in the pedal

crank recess opening as shown in the

illustration.

Caution

Make sure that the pedal does not

touch the surface of the rear end

carrier. Otherwise the crankset

might be damaged during the

transport.

If the bicycle has curved pedal

cranks, screw in the pedal crank unit

all the way (position 1).

With the rotary lever on the pedal

crank recess, roughly adapt the

adjustable pedal crank unit to the

protrusion of the pedal crank.

If the bicycle has straight pedal

cranks, unscrew the pedal crank unit

completely (position 5).

Insert pedal crank mount into outer

rail of each pedal crank recess from

above and slide downwards until at

least underneath the notching.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Place the wheel recesses so that the

bicycle is roughly horizontal. Here,

the distance between the pedals and

the tailgate should be at least 5 cm.

Both bicycle tyres must be in the

wheel recesses.

Caution

Ensure that the wheel recesses

are pulled out as far as necessary

to have both bicycle tyres placed

Attach the pedal crank by rotating the

in the recesses. Otherwise a

Align the bicycle in the longitudinal

attachment screw on the pedal crank

horizontal mounting of the bicycle

direction of the vehicle: Slightly

mount.

is not guaranteed. Disregard could

loosen the pedal mount.

lead to damage of the bicycle

Place the bicycle upright using the

wheels caused by hot exhaust

rotary lever on the pedal crank

fumes.

recess.

If the two bicycles obstruct one

another, the relative positions of the

bicycles can be adapted by adjusting

the wheel recesses and the rotary

lever on the pedal crank recess until

the bicycles no longer touch one

another. Ensure there is sufficient

clearance from the vehicle.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

The settings for the wheel recesses

Hold on to the bicycle, loosen the

and on the rotary lever on the pedal

attachment screw for the pedal

crank recess should be noted and

bearing mount, then lift the pedal

saved for each bicycle. Correct

bearing mount to remove it.

presetting will facilitate refitting of the

bicycle.

Retracting the rear carrier system

Notice

It is recommended to attach a

warning sign at the rearmost bicycle

to increase visibility.

Removing a bicycle from the rear

carrier system

Tighten the attachment screw for the

pedal bearing mount to its maximum

point by hand.

Secure both bicycle wheels to wheel

recesses using strap retainers.

Check the bicycle to ensure it is

secure.

Push the pedal crank mounts into the

pedal crank recess as shown in the

illustration.

Caution

Ensure gap between bicycle and

vehicle is at least 5 cm. If

necessary, loosen handlebar and

swivel sideways.

Undo strap retainers on both bicycle

tyres.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Press release lever and slide in wheel

recesses all the way as far as they will

go.

Insert the strap retainer and pull

Swivel first the right clamping lever

tightly downwards as far as possible.

(1) forwards, followed by the left

clamping lever (2), until they can be

engaged in their respective recesses.

Disengage the locking lever on the

diagonal support and fold both pedal

crank recesses down.

9 Warning

Risk of pinching.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Push the clamping lever down and

Load compartment

pull both lamp supports out of the

recesses.

Load compartment extension

The rear backrest can be locked in

two positions. When transporting

bulky items, lock in an upright

position.

Push the release lever up and hold.

Lift the system slightly and push it into

the bumper until it engages.

Release lever must return to original

Fold in the lamp supports on the

position.

backs of the tail lamps.

First place the front tail lamp (1), then

9 Warning

the rear tail lamp (2) in the recesses

and push down as far as possible.

If the system cannot be correctly

Push cables all the way into all guides

Split backrest

engaged, please seek the

in order to prevent damage.

assistance of a workshop.

Pull the release handle on the

Open the tailgate.

relevant side, pull the backrest

forwards to the vertical position and

engage.

Single-unit backrest

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Pull the release handle on both sides,

Guide the seat belts through side

If the vehicle is to be loaded via a rear

pull the backrest forwards to the

supports to protect them against

door, take the seat belt out of the seat

vertical position and engage.

damage. When folding the backrest,

backrest guide and insert the latch

pull the seat belts along with it.

plate in the recess as shown in the

When unlocking, a red marking

illustration.

appears next to the release lever. The

Split backrest

backrest is properly engaged when

To fold up, raise the backrest and

Pull the release handle on the

the red marks on both sides near the

guide it into an upright position until it

relevant side and fold it down onto the

release lever are no longer visible.

engages audibly.

seat cushion.

Ensure that the seat belts of the

Folding down rear backrests

Single-unit backrest

outboard seats are placed in the

Pull the release handle on both sides

Remove load compartment cover as

corresponding belt guides.

and fold it down onto the seat

necessary.

cushion.

Push head restraints down by

pressing the catch.

The backrest is properly engaged

when the red marks on both sides

near the release lever are no longer

visible.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Fitting

Load compartment cover

9 Warning

Engage cover in side guides and fold

Do not place any objects on the cover.

downwards. Attach retaining straps to

Only drive the vehicle when the

tailgate.

backrests are securely locked into

3-door/5-door hatchback

position. Otherwise there is a risk

Delivery van

Removing

of personal injury or damage to the

load or vehicle in the event of hard

The load compartment cover consists

braking or a collision.

of four segments which can be

individually removed and inserted.

Removing

Unhook retaining straps from tailgate.

Lift cover at the rear and push it

upwards at the front.

The seat belt of the centre seat could

be blocked when the backrest is

Remove the cover.

folded up too quickly. To unlock the

To remove rear cover, unhook

Stowing

retractor, push in the seat belt or pull

retaining straps from tailgate.

When the load compartment is fully

it out by approx. 20 mm then release.

loaded, stow the load compartment

Lift cover at the rear and push it

cover on the rear seats or remove

upwards at the front. Remove the

from vehicle.

cover.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Storage

Rear floor storage cover

Rear floor cover

To remove the three other segments

● directly above the cover for the

(order 1 to 3) lift at the rear,

spare wheel recess or the floor

disengage, twist and remove.

cover

● or in the upper openings in the

Fitting

Lift up rear floor cover to gain access

load compartment

Install the segments in the order 3 to

to emergency breakdown equipment.

To remove, lift the load-bay floor

1. Engage segments in recesses at

Tools 3 209.

using the recess and pull backwards.

the side.

In models with a tyre repair kit on the

To insert, push the load-bay floor

The segments overlap at the

right side in the load compartment,

forwards in the corresponding guide,

connecting points when they are

the spare wheel recess may be used

then lower.

closed.

as an additional stowage

compartment. Tyre repair kit 3 217.

If mounted in the upper position, the

To install rear cover, engage cover in

space between the load-bay floor and

side guides and fold downwards.

Double load-bay floor

the spare wheel well cover can be

Attach retaining straps to tailgate.

used as a stowage compartment.

The double load-bay floor can be

inserted in the load compartment in

two positions:

Vauxhall Corsa (2016 year). Manual - part 4