Porsche Cayenne (2010 year). Manual - part 9
1.
MAIN MENU
Setting the clock
>SETTINGS
> LIGHTS
1.
MAIN MENU
Select and confirm.
>SETTINGS
> CLOCK
2.
Select OFF DELAY.
Select and confirm.
3.
Confirm selection.
2.
Select xx:xx SET.
The set off delay time is now active.
3.
Confirm selection.
4.
Select the time input field.
4.
Select hours or minutes display.
5.
Confirm selection.
Setting lighting off delay
5.
Confirm selection.
6.
Set the off delay time (Coming Home function):
The desired time can now be set.
The time is adjusted by pressing the rocker
Note on operation
switch. Delay times of 15, 30 or 60 seconds
6.
Set the desired time:
The options in the LIGHTS menu can only be set
can be set.
The time is adjusted in hour or minute incre-
when the vehicle is stationary.
ments by pressing the rocker switch.
7.
Confirm selection.
You can set the duration the lights remain on after
7.
Confirm selection.
the vehicle is locked.
Selecting 12 h mode
8. Select 12 h-MODE.
9. Confirm selection.
12 h mode is activated.
12 h mode is deactivated.
Note on operation
There is also a button on the instrument panel to
call the CLOCK menu:
f Please see the chapter “C - CLOCK” on
Page 120.
146 Multi-Purpose Display and Instruments
Calibrating compass
In rare cases, external disturbances may necessi-
tate calibration of the compass. The warning
message “CAL.” then appears on the multi-
purpose display.
f To calibrate the compass, follow the displayed
instruction DRIVE IN A FULL CIRCLE.
The display returns to the main menu after
successful calibration.
Setting compass
The display is available only for vehicles equipped
with Porsche Radio CDR-23 and magnetic field
1. MAIN MENU
sensor.
>SETTINGS
> COMPASS
If you drive your vehicle across the magnetic field
Select and confirm.
zone set on the multi-purpose display, you must
2. Select SET ZONE xx.
enter your current zone in the COMPASS menu
(see illustration).
3. Confirm selection.
4. Select zone.
The setting is changed in increments of 1 by
pressing the rocker switch.
5. Confirm selection.
Multi-Purpose Display and Instruments
147
Changing units for displays
1. MAIN MENU
>SETTINGS
> UNITS
Select and confirm.
2. Select the desired category (e.g. SPEEDO-
METER).
3. Confirm selection.
Changing language for displays
4. Select the desired unit (e.g. MPH).
Resetting display to factory
5. Confirm selection.
settings
1. MAIN MENU
>SETTINGS
All settings made (Clock, Comfort, Lights, Units,
Available categories and units
> LANGUAGE
Language) can be reset to the factory settings.
Select and confirm.
- Speedometer:
Note
2. Select the desired language.
km/h - km, mph - mls
All personal settings made up to this point will be
3. Confirm selection.
- Consumption:
deleted by resetting to the factory settings.
l/100 km, km/l, MPG (UK),
Note
MPG (US)
1. MAIN MENU
Changing the language will affect the entire multi-
>SETTINGS
- Temperature:
purpose display.
> FACTORY SET
°C - CELSIUS, °F - FAHRENHEIT
Select and confirm.
- Tire pressure:
2. Select RESET.
bar, psi
3. Confirm selection.
148 Multi-Purpose Display and Instruments
Overview of warning messages
If a warning message appears, always refer to the corresponding chapters in this Owner’s Manual.
Warning messages are issued only if all measurement preconditions are met.
Therefore, check all fluid levels regularly - in particular, always check the engine oil level after refueling.
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
Steering faulty
Steering lock engaged.
Have the fault remedied at an authorized Porsche dealer.
Ignition lock faulty
Do not continue driving.
Have the fault remedied at an authorized Porsche dealer.
System fault
Have the fault remedied at an authorized Porsche dealer.
Key not recognised in vehicle
Make sure that you have the remote control with you.
Turn ignition key to the left for 2
To lock the steering, turn the ignition key to the left and hold for 2 seconds.
seconds
Key: replace battery
Replace the remote-control battery.
Move steering wheel
Turn the steering wheel so that the steering wheel lock can engage/disengage.
Key not found
Make sure that you have the remote control with you.
Move selector lever to position P
Tiptronic S: The vehicle could roll away.
The ignition key can be withdrawn only in Tiptronic selector lever position P.
Press brake pedal
Apply the brake when starting.
Move selector lever to position
Tiptronic S: The vehicle can be started only in position P or N.
P or N
Depress clutch
Manual transmission: Depress clutch pedal when starting.
Multi-Purpose Display and Instruments
149
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
Immobilizer active
Have the fault remedied at an authorized Porsche dealer.
Check left static cornering
Check bulb.
light
Check right static cornering
Check bulb.
light
Check dynamic cornering light
Have the fault remedied at an authorized Porsche dealer.
If the warning message appears, the high beam indicator light on the speedometer flashes additionally.
Check dipped beam
Check bulb.
Check trailer lights
Check bulb.
Check direction indicators
Check bulb.
Check high beam
Check bulb.
Check licence plate light
Check bulb.
Check fog lights
Check bulb.
Check reversing lights
Check bulb.
Check front side lights
Check bulb.
Check headlight beam adjustment
Have the fault remedied at an authorized Porsche dealer.
Daytime driving lights off
Daytime driving lights switch off when the ignition is switched-off.
Switch on lights by light switch if necessary.
System fault headlamp
Have the fault remedied at an authorized Porsche dealer.
150 Multi-Purpose Display and Instruments
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
Check passenger seat setting
Weight sensing is impaired on the passenger’s seat (Advanced Airbag).
Correct the seating position, set the backrest upright, do not support weight on the armrests, or lift on
the handles.
Airbag faulty.
Have the fault remedied at an authorized Porsche dealer.
Seat belt
Fasten seat belt.
Caution flat tyre
Tire Pressure Monitoring detects a pressure loss of at least 6 psi (0.4 bar) or a larger leak.
Check tyres
Stop in a suitable place and check tires. Change wheel if necessary.
Check spare wheel
Appears about every 6 months.
required pressure: 3.4 bar/50 psi
Check if the pressure of the mounted spare wheel matches the required pressure manually, as it is not
monitored electronically.
Tyre pressure too low
Tire Pressure Monitoring detects a pressure loss of at least 4 psi (0.3 bar).
Add air
Correct tire pressure at the next opportunity.
Collapsible spare wheel/sealing
Observe maximum permitted speed.
set max. 50 mph (80 km/h)
Collapsible spare wheel
Information on driving with a collapsible spare wheel after selection in spare wheel menu.
Required pressure: 3.5 bar/
Observe maximum speed of max. 50 mph or 80 km/h and required pressure of 51 psi or 3.5 bar.
51 psi
max. 50 mph (80 km/h)
System not active
Tire Pressure Monitoring faulty.
Have the fault remedied at an authorized Porsche dealer.
Select new set of wheels in the tire pressure menu after changing the wheels.
System not active
External interference (e.g. wireless headphones) or excessive temperature (over 248 °F/120 °C) at the
Brief disturbance
wheel transmitters. Tire Pressure Monitoring will reactivate itself.
System not active
Tire Pressure Monitoring detects more than 4 wheel transmitters (e.g. winter wheels in the luggage
Too many wheel transmitters
compartment)
Tire Pressure Monitoring will reactivate itself after the additional wheel transmitters have been removed.
Multi-Purpose Display and Instruments
151
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
No monitoring
After the tire type and size are selected in the tire pressure menu, Tire Pressure Monitoring re-learns
System learning
the tires.
Wheel change?
The tire type and size of the changed tires have not been updated for Tire Pressure Monitoring.
Make new selection
The display changes when the vehicle is stationary: Select corresponding tire type and tire size.
When vehicle stops:
The message appears after driving off if the warning “Flat tyre” has been cleared but the selection on
Hit selection
the display SELECTION AFTER WARNING has not been made properly.
Make selection on the multi-purpose display when the vehicle is stationary.
Engine temperature too high
Coolant or engine oil temperature is too high. Switch engine off and let it cool.
Check coolant or engine oil level. Add coolant or engine oil if necessary.
Check coolant level
Switch engine off and let it cool.
Check coolant level. Add coolant if necessary.
Warning battery/generator
Stop in a suitable place and switch engine off. Do not continue driving.
Have the fault remedied at an authorized Porsche dealer.
Start engine
The battery discharges if the engine is not running and loads are switched on.
Start the vehicle or switch the loads off.
Electric load
Vehicle electrical system is overloaded. Certain loads (e.g. heated rear window, seat heating) will be
Switch-off
switched off.
Stop immediately at a suitable and secure place and check tank cap for proper fastening. If tank cap
was fastened correctly, consult your authorized Porsche dealer.
Please refuel
Add washer fluid
Oil level monitoring
Have the fault remedied at an authorized Porsche dealer.
Failure
Check oil level
Check the oil level using the oil dipstick as soon as possible and add engine oil if necessary.
152 Multi-Purpose Display and Instruments
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
Oil pressure too low
Immediately stop in a suitable place and switch engine off. Do not continue driving.
Check engine oil level. Add oil if necessary.
Do not continue driving if the warning light comes on even when the oil level is correct. Have the fault
remedied at an authorized Porsche dealer.
Oil pressure monitoring
Have the fault remedied at an authorized Porsche dealer.
Failure
Service in 1864 mls (3000 km)
Service indicator
Bring the vehicle in for service no later than after the distance shown has been covered. Please see the
additional information in the “Maintenance” booklet.
Service now
Service indicator
Have your vehicle serviced at an authorized Porsche dealer.
Brake pads
Have the brake pads replaced at an authorized Porsche dealer.
Warning
Stop immediately in a suitable place. Do not continue driving.
Brake proportioning
Have the fault remedied at an authorized Porsche dealer.
ABS failure
Drive carefully. Have the fault remedied at an authorized Porsche dealer.
PSM failure
Drive carefully. Have the fault remedied at an authorized Porsche dealer.
Warning
Stop immediately in a suitable place. Do not continue driving.
Brake fluid level
Have the fault remedied at an authorized Porsche dealer.
Parking brake
Parking brake not released.
PSM on
Porsche Stability Management was switched on.
Multi-Purpose Display and Instruments
153
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
PSM off
Porsche Stability Management was switched off.
PHC unavailable
The Porsche Drive-off Assistant (manual transmission) is not available.
Brake booster faulty
Greater brake pedal force necessary.
Drive carefully to the nearest authorized Porsche dealer.
Chassis sport
Current setting of Porsche Active Suspension Management
Chassis normal
Current setting of Porsche Active Suspension Management
Chassis comfort
Current setting of Porsche Active Suspension Management
Chassis system faulty
Handling may be affected. Adapt your speed to the changed conditions. Have the fault remedied at an
authorized Porsche dealer.
Warning chassis system
The side tilt of the vehicle is significantly greater when cornering. Drive carefully at an appropriate speed
to the nearest authorized Porsche dealer.
Warning chassis system
Stop at a suitable place. Do not continue driving.
Have the fault remedied at an authorized Porsche dealer.
Chassis system faulty
Drive carefully to the nearest authorized Porsche dealer.
Spare wheel filling
Collapsible spare wheel is being filled by level-control compressor. Do not drive off!
Regulation switched off
Level control has been switched off (to jack up the vehicle).
Not permissible
The prerequisites for setting the desired level have not been met.
Pressure accumulator charging
Level control temporarily unavailable.
Four-wheel drive system faulty
Have the fault remedied at an authorized Porsche dealer.
154 Multi-Purpose Display and Instruments
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
Shift not possible;
Tiptronic S: When changing between Low Range and High Range, the limit speed (Low Range program)
Speed too high
must not be exceeded.
Shift only possible in neutral
Tiptronic S: The Tiptronic selector lever must be in position N when changing between Low Range and
High Range.
Possible only when stopped in
Manual transmission: The vehicle must be stationary, the brakes must be applied and the gearshift lever
neutral with brake
must be in the neutral position when changing between Low Range and High Range.
Warning parking lock!
Do not continue driving. Apply the parking brake.
Apply parking brake!
Have the fault remedied at an authorized Porsche dealer.
Failure sport mode
Have the fault remedied at an authorized Porsche dealer.
Sport mode only usable
Sport mode cannot be selected when the off-road driving program (Low Range) is engaged.
without reduction
Limit exceeded.
The set speed limit has been exceeded.
Spare wheel is not locked.
Danger of injury and damage. Before driving off always lock the spare wheel correctly.
Driver’s door open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
Passenger’s door open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
Rear left door open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
Multi-Purpose Display and Instruments
155
Light on
Warning message on the multi-purpose
Meaning/measures
instrument
display
panel
Rear right door open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
Hood open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
Rear lid open.
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
Rear window open
All unlocked doors and lids are displayed when the vehicle exceeds 2 mph (3 km/h).
System fault
Several systems may have failed.
Have the fault remedied at an authorized Porsche dealer.
156 Multi-Purpose Display and Instruments
Driving and Driving Safety
Ignition Lock/Steering Lock
158
Starting and Stopping the Engine
160
Parking Brake
162
Brakes
163
Cruise Control
167
Manual transmission, clutch
169
Tiptronic S
170
Selector Lever Positions
171
Driving Programs for On-Road and
Off-Road Driving
177
Power-Transmission and
Running-Gear Control Systems
181
Air Suspension with Level Control and
Height Adjustment
190
Porsche Active Suspension
Management (PASM)
193
Porsche Dynamic Chassis Control (PDCC)
194
Off-Road Driving
195
Driving and Driving Safety
157
The ignition key is replaced by a control unit in the
ignition lock, which always remains in the ignition
lock, unless the vehicle is being towed.
Removing the control unit from the ignition
lock
f Press button A and remove the control unit.
Ignition lock position 0 - Initial position
The ignition key cannot be withdrawn when the ig-
nition is switched on or when the engine is started.
To withdraw the ignition key:
f Stop the vehicle.
f On vehicles with Tiptronic S:
Move Tiptronic selector lever to position P.
Ignition lock positions:
Ignition lock positions with Porsche Entry & Drive:
f Switch ignition off.
0 - Initial position
0 - Initial position
1 - Ignition on
1 - Ignition on
f Withdraw the ignition key.
2 - Start engine
2 - Start engine
3 - Ignition off
3 - Ignition off
Note on operation
The ignition lock has a total of four ignition lock
The vehicle battery discharges if the ignition key is
Ignition Lock/Steering Lock
positions.
left inserted.
Caution!
f If the vehicle battery is dead, the key can only
Note on operation
be pulled out of the ignition lock if the emergen-
Risk of damage. The ignition lock may be da-
The car key rebounds to the initial position from
cy operation is performed:
maged if additional weight is attached to the
every ignition lock position.
Please see the chapter “EMERGENCY OPERA-
inserted ignition key, e.g. a heavy bunch of
TION - UNLOCKING THE IGNITION KEY” on
keys and/or key tag.
For vehicles that have Porsche Entry & Drive
Page 159.
you do not need to insert the key into the ignition
f Do not attach a heavy weight to the inserted ig-
lock again but merely keep it with you.
nition key.
158 Driving and Driving Safety
Ignition lock position 1 - Ignition on
Locking the steering column
f Turn ignition key to position 1.
Vehicles without Porsche Entry & Drive
The steering column is automatically locked
Note on operation
when the ignition key is withdrawn from the
All electrical equipment can be switched on.
ignition lock and is automatically unlocked
The warning lights light up for a lamp check.
when the ignition key is inserted into the ignition
lock.
f Please see the chapter “INSTRUMENT PANEL
USA MODELS” on Page 117.
Vehicles with Porsche Entry & Drive
If a load is not switched on for 10 minutes after
The steering column is automatically locked
switching on the ignition, the ignition must be
when the ignition is switched off and the vehicle is
switched on again.
locked.
Turn the ignition key to ignition lock position 3
(ignition off) first.
Manually locking the steering column on
vehicles with Porsche Entry & Drive
Ignition lock position 2 - Starting engine
f Depress the clutch on vehicles with manual
transmission.
Emergency operation - unlocking the
f Turn ignition key to ignition lock position 2.
ignition key
f Once the ignition is switched off, turn the
control unit again to ignition lock position 3
Ignition lock position 3 - Ignition off
If the vehicle battery is dead, the key can only be
and hold it there for 2 seconds.
pulled out of the ignition lock if the emergency
f Turn ignition key to ignition lock position 3.
The steering column is automatically unlocked
operation is performed.
f For further information on starting and stop-
by turning the control unit from ignition lock
1. Turn ignition key counter-clockwise.
ping the engine:
position 0.
Please see the chapter “STARTING AND STOP-
2. Press a pointed object, e.g. a ballpoint pen, in
PING THE ENGINE” on Page 160.
the opening A next to the ignition lock and
keep pressed.
3. Remove ignition key.
Driving and Driving Safety
159
Starting vehicle
f Do not warm up the engine when stationary.
Starting and Stopping the Engine
Drive off immediately.
f Please see the chapter “IMMOBILIZER” on
f
Operate footbrake.
Avoid high revolutions and full throttle until the
Page 248.
engine has reached operating temperature.
f
Fully depress and hold the clutch pedal. Put the
f Please see the chapter “EMISSION CONTROL
gearshift lever in neutral or on vehicles with
f If battery output is insufficient, jump leads can
SYSTEM” on Page 263.
Tiptronic S:
be used to start the engine.
move the Tiptronic selector lever to position P
Please see the chapter “EMERGENCY
Danger!
or N.
STARTING WITH JUMPER CABLES” on
Page 323.
Risk of poisoning. Exhaust gas contains
f
Do not press the accelerator pedal. The engine
colorless and odorless carbon monoxide
control module will provide the correct starting
Note on operation
(CO), which is toxic even in low concentra-
mixture.
tion. Carbon monoxide can cause uncon-
To ensure a good charge condition for the battery
f
Turn ignition key to ignition lock position 2.
and thus its ability to start the engine, all electrical
sciousness and even death if inhaled.
f
Do not operate the starter longer than approx.
accessories which are not required should be
f Never start or let the engine run in an en-
switched off when the ignition is switched on and
10 seconds. If necessary, repeat the starting
closed, unventilated area. It is not recommen-
when engine revolutions are low (in stop and go
procedure after a pause of approx.
ded to sit in your car for prolonged periods
traffic).
10 seconds. Turn the ignition key back to
with the engine on and the car not moving.
ignition lock position 3 first.
An unattended vehicle with a running engine
Notes on operation
is potentially hazardous. If warning lights
should come on to indicate improper opera-
The first operation of the starter is ended auto-
tion, they would go unnoticed.
matically when the engine starts.
If the engine does not start, subsequent starter
f Never leave the engine idling unattended.
operations will not be ended automatically.
Danger of fire.
When the engine ist started, the warning lights
f Do not drive or park your car where combus-
must go out.
tible materials, such as dry grass or leaves,
can come into contact with the hot exhaust
system.
f If your car catches on fire for any reason, call
the fire department. Do not endanger your life
by attempting to put out the fire.
160 Driving and Driving Safety
Stopping
Warning!
Radiator fans
Danger of injury. Hot engine compartment
The radiator and radiator fans are in the front of
f
Withdraw the ignition key only when the vehicle
components can burn skin on contact.
the car.
is stationary, otherwise the steering lock
engages and the vehicle cannot be steered.
f Before working on any part in the engine
Warning!
compartment, turn the engine off and let it cool
f
Only switch the ignition off when the vehicle
down sufficiently.
Danger of injury. After the ignition is
comes to a stop, as there is no steering assis-
switched off, the engine compartment and
tance and brake boost when the engine is
Risk of burn injury when standing near or co-
coolant temperatures are monitored for
switched off.
ming into contact with the exhaust pipe.
approx. 30 minutes. During this period, and
f
When leaving the vehicle, always remove the
The exhaust pipe is hot when the vehicle is running
depending on temperature, the radiator fan
ignition key and engage the parking brake.
and remains hot for some time after the vehicle is
may continue to run or start to run.
Engage the parking lock on vehicles with
turned off.
f Carry out work in these areas only with the
Tiptronic S (Tiptronic selector lever position
f To prevent injury, make a point of noting where
engine off and exercise extreme caution.
P). Engage first gear or reverse gear on vehic-
your vehicle’s exhaust pipe is, avoid placing
les with manual transmission.
your legs near the exhaust pipe when loading
The control unit always remains in the ignition
and unloading cargo in the rear, and closely
lock in vehicles that have Porsche Entry &
supervise children around the vehicle during
Drive.
time when the exhaust pipe could be hot.
A hot exhaust pipe can cause serious burns.
Note on operation
The vehicle battery discharges if the ignition key is
left inserted.
Driving and Driving Safety
161
Applying the parking brake
Releasing the parking brake
f Press down firmly on the foot pedal.
f Press on the footbrake and pull handle A of the
The warning light in the instrument panel lights
parking brake.
up.
The warning light and the message disappear.
A message will be displayed on the multi-
purpose display of the instrument panel if the
parking brake is not released before moving
off.
If the brake is not fully set, the vehicle may roll
without control.
f Before exiting the vehicle, make sure that the
parking brake is fully applied and the vehicle is
not moving at all.
Danger!
Risk of serious personal injury or death. A
Parking Brake
partially engaged parking brake may allow
the vehicle to roll, causing serious personal
The parking brake acts on the rear wheels and
injury or death to any person in its path.
serves to secure the car while parked.
f Engage the parking brake fully.
f Use the parking brake only after the vehicle
has come to a full stop.
f Please see the chapter “OVERVIEW OF
WARNING MESSAGES” on Page 149.
162 Driving and Driving Safety