|
|
Welding in cowl panel reinforcement 6. Welding in cowl panel reinforcement 6.1. Resistance spot-weld the cowl panel reinforcement in areas -A- and -B- . 7. Install hinge pillar reinforcement at the left and right. → 516255 23 Replacing hinge pillar reinforcement - section on "Installing" 8. Install roof. → 510355 Replacing roof - section on "Installing" [997110 997111 997120 997121]→ 510355 23 Replacing roof - section on "Installing" [997410 997411] Subsequent work Subsequent work for body repairs 1. Removing vehicle from straightening bench 2. Cleaning spot-welded joints and sheetmetal flanges with a wire brush 3. Priming flange areas with 2K primer 4. Restore standard sealing with body sealant → 501000 Seam seal 5. Restore standard undersealing with underbody sealant 6. Painting repair area and adjacent surfaces, if necessary 7. Install removed add-on parts in the repair area 8. Apply cavity preservation. 997110, 997111, 997120, 997121, 997410, 997411 Diagnostic system: reading out fault memory and activating systems Subsequent work 1593 |