|
|
Section 10 STEERING/FRONT SUSPENSION A33F27A Using a 4.8 mm (3/16 in) drill bit, drill rivet no. 24 1 A33F23A 2 1. Drill rivet out with a 4.8 mm (3/16 in) drill bit Lift front of vehicle enough so that stabilizer bar A33F24A To remove bushing no. 25, use a 13 mm (1/2 in) 1 A33F25A 1. Use a 13 mm (1/2 in) open wrench to push bushing out INSPECTION Check all plastic bushings for wear. Replace as Check condition of ski leg no. 12. Replace as re- Check for straightness of lower and upper arms. 454 mmr2005-098 |