|
|
Section 08 DRIVE SYSTEM Subsection 03 (DRIVEN PULLEY) A03D2SA 1 2 2 2 1 1 1. BLACK slider shoe Assemble driven pulley components by reversing Cam and Spring Make sure to install proper cam. Refer to TECH- Cam angle is identified on cam. B O M B A RD IER 6 5 4 3 2 1 44 ° A24D06A Install spring no. 6 in sliding half with its end in- Position cam no. 5 then insert spring in adjusting IMPORTANT: With the spring ends at positions Compress outer cam using the clutch spring com- CAUTION: Ensure that circlip is properly insert- INSTALLATION Countershaft Apply Loctite antiseize lubricant (P/N 293 800 070) CAUTION: Always apply antiseize on the coun- Make sure that spacer no. 2 is on countershaft A30D14A 1 2 3 TYPICAL Should installation procedure be required, refer to Reinstall the pulley on the countershaft by revers- Pulley Retaining Screw Torque pulley retaining screw no. 14 to 25 N•m mmr2005-088 343 |