|
|
9-132 REAR SPRING SELECTION CHART (cont) *Long leg of spring is bent inward **Short leg of spring is bent inward ***Must be cut to correct length ****Square wire ****Titanium NOTE: The wire diameter and length of the spring have a large influence over the valving of the shocks. P/N Wire Diameter (A) Angle (B) Number of Coils Coil Width (C) Length (D) Length (E) 2604-566/567***** .437 80° 7.75 4.25 18.50 5.12 2604-588/589*** .421 77° 8.75 4.52 22.00 8.00 0704-876/877**** .375 90° 5.75 3.00 15.62 5.12 0704-894/895 .406 06° 4.48 2.45 06.03 4.57 0704-886/887** .460 77° 8.75 4.85 20.00 5.50 0704-888/889** .437 75° 8.75 4.60 18.50 5.50 0704-890/891**** .359 90° 5.75 3.00 15.62 5.12 0704-892/893**** .405 75° 8.75 4.32 19.00 5.50 0704-938/939 .452 90° 8.75 4.53 16.00 5.70 0704-944/945** .452 75° 8.75 4.62 18.75 5.50 0704-986/987 .406 90° 8.75 4.32 18.10 5.70 0704-988/989** .437 90° 8.75 4.59 18.10 5.70 0704-822/821 .452 90° 8.75 4.75 18.75 5.50 0704-856/857 .437 83° 8.75 4.59 20.00 5.70 0704-902/901**** .405 80° 7.75 3.92 19.00 5.50 0704-908/909 .437 75° 8.75 4.60 18.50 5.50 0704-926/927**** .375 80° 5.75 3.00 18.50 5.12 0704-934/935**** .405 90° 5.75 3.00 18.50 5.12 0704-968/969**** .437 90° 6.75 3.50 18.50 5.12 0704-990/991* .421 77° 8.75 4.32 20.00 5.50 1704-044/045 .405 75° 7.75 3.91 19.00 5.50 1704-074/075** .460 97° 9.00 4.53 16.00 5.70 1704-146/147**** .405 70° 6.75 4.00 18.50 5.50 1704-148/149**** .437 80° 7.75 4.25 18.50 5.12 1704-172/173 .406 65° 7.75 3.88 17.50 4.50 |