|
|
Historical Publications
MPMS CHAPTER 11.1-1980
Chapter 11.1
Volume Correction Factors-Volume VI
Chapter 11.1-1980 has not been withdrawn, but superseded.
Table
24C-Volume Correction Factors for Individual and Special
The 1980 standards should not be utilized on new applications.
Applications, Volume Correction to 60°F Against Thermal Expansion
Chapter 11.1-2004 (page 63 of this Catalog) is to be utilized on
Coefficients at 60°F.
all new applications.
August 1980 | Reaffirmed, March 1997 | Price: $140.00
Chapter 11.1
Chapter 11.1
Volume Correction Factors-Volume I
Volume Correction Factors-Volume VII
Table 5A-Generalized Crude Oils and JP-4, Correction of Observed API
Table 53A-Generalized Crude Oils, Correction of Observed Density to
Gravity to API Gravity at 60°F.
Density at 15°C.
Table 6A-Generalized Crude Oils and JP-4, Correction of Volume to 60°F
Table 54A-Generalized Crude Oils, Correction of Volume to 15°C Against
Against API Gravity at 60°F.
Density at 15°C.
August 1980 | Reaffirmed, March 1997 | Price: $140.00
August 1980 | Reaffirmed, March 1997 | Price: $140.00
Chapter 11.1
Chapter 11.1
Volume Correction Factors-Volume II
Volume Correction Factors-Volume VIII
Table 5B-Generalized Products, Correction of Observed API Gravity to API
Table 53B-Generalized Products, Correction of Observed Density to Density
Gravity at 60°F.
at 15°C.
Table 6B-Generalized Products, Correction of Volume to 60°F Against API
Gravity at 60°F.
Table 54B-Generalized Products, Correction of Volume to 15°C Against
Density at 15°C.
August 1980 | Reaffirmed, March 1997 | Price: $140.00
August 1980 | Reaffirmed, March 1997 | Price: $140.00
Chapter 11.1
Volume Correction Factors-Volume III
Chapter 11.1
Volume Correction Factors-Volume IX
Table 6C-Volume Correction Factors for Individual and Special Applications,
Volume Correction to 60°F Against Thermal Expansion Coefficients at 60°F.
Table
54C-Volume Correction Factors for Individual and Special
August 1980 | Reaffirmed, March 1997 | Price: $140.00
Applications, Volume Correction to 15°C Against Thermal Expansion
Coefficients at 15°C.
Chapter 11.1
August 1980 | Reaffirmed, March 1997 | Price: $140.00
Volume Correction Factors-Addendum to Volume III/IX Volume
Correction-MTBE
Chapter 11.1
Volume Correction Factors-Volume X
Provides users of the API Manual of Petroleum Measurement Standards
Chapter 11.1, Volume III (Table 6C) and Volume IX (Table 54C) with revised
Background, Development, and Computer Documentation, including
volume correction factor tables for MTBE. The tables can be used to expedite
computer subroutines in Fortran IV for all volumes of Chapter 11.1, except
calculation of the volume of mixtures composed predominantly of MTBE at
Volumes XI/XII, XIII, and XIV. Implementation procedures, including rounding
standard conditions from volumes at other conditions. These tables apply to
and truncating procedures, are also included. These subroutines are not
commercially available mixtures containing at least 85 weight percent MTBE.
available through API in magnetic or electronic form. Pages: 403
The information gained from using these tables can be used to determine
August 1980 | Reaffirmed, March 1997 | Price: $140.00
quantities of MTBE in tanks, shipping containers, and other storage
containers typically used in the petroleum industry. Table 6C-Volume
Chapter 11.1
Correction Factors for Individual and Special Applications, Volume Correction
Volume Correction Factors-Volume XI/XII
for MTBE to 60°F and Volume IX, Table 54C-Volume Correction for
Individual and Special Applications, Volume Correction for MTBE to 15°C.
Superseded by Chapter 11.5, Parts 1 to 3, 2009
Pages: 4
(see page 60 of this Catalog)
1st Edition | January 1995 | Price: $140.00
Two combined volumes, containing Petroleum Measurement Subsidiary
Tables 1-4, 8-14, 21, 22, 26-31, 33, 34, 51, 52, and 56-58, which
Chapter 11.1
provide conversions between volume measures and density measures.
Volume Correction Factors-Volume IV
January 1980 | Reaffirmed, December 1999
Table 23A-Generalized Crude Oils, Correction of Observed Relative Density
Order from ASTM | 100 Barr Harbor Drive | West Conshohocken, PA 19428
to Relative Density at 60/60°F.
Tel: (610) 832-9500
Table 24A-Generalized Crude Oils, Correction of Volume to 60°F Against
Relative Density 60/60°F.
Chapter 11.1
August 1980 | Reaffirmed, March 1997 | Price: $140.00
Volume Correction Factors-Volume XIII
Chapter 11.1
Table 5D-Generalized Lubricating Oils, Correction of Observed API Gravity to
Volume Correction Factors-Volume V
API Gravity at 60°F.
Table 6D-Generalized Lubricating Oils, Correction of Volume to 60°F
Table 23B-Generalized Products, Correction of Observed Relative Density to
Against API Gravity at 60°F.
Relative Density at 60/60°F.
January 1982 | Reaffirmed, March 1997 | Price: $140.00
Table 24B-Generalized Products, Correction of Volume to 60°F Against
Relative Density 60/60°F.
August 1980 | Reaffirmed, March 1997 | Price: $140.00
179
Historical Publications
To purchase individual API standards, visit apiwebstore.org
Chapter 11.1
Offshore Operating Agreement, 2nd ed. 1996
Volume Correction Factors-Volume XIV
Report of Eastern/Western Hemisphere Production of Casing, Tubing, and
Drill Pipe, 1997-2004
Table 53D-Generalized Lubricating Oils, Correction of Observed Density to
Density at 15°C.
Report of Eastern/Western Hemisphere Production of Line Pipe, 1997-2004
Table 54D-Generalized Lubricating Oils, Correction of Volume to 15°C
Vocational Training Series 1-6
Against Density at 15°C.
Book 1, Introduction to Oil and Gas Production, 4th ed. 1983
January 1982 | Reaffirmed, March 1997 | Price: $140.00
Book 2, Corrosion of Oil and Gas Well Equipment, 1st ed. 1958,
2nd ed. 1990
Chapter 11.2.1
Book 3, Subsurface Salt Water Injection and Disposal, 2nd ed. 1978
Compressibility Factors for Hydrocarbons: 0-90° API Gravity Range
Book 4, Well Testing, 2nd ed. 1976
Provides tables to correct hydrocarbon volumes metered under pressure to
Book 5, Wireline Operations and Procedures, 1983
corresponding volumes at the equilibrium pressure for the metered
temperature. It contains compressibility factors related to meter temperature
Book 6, Gas Lift, 1984
and API gravity (60°F) of metered material. Pages: 149
Worldwide Cementing Practices, 1st ed. 1991
1st Edition | August 1984 | Reaffirmed, May 1996 | Price: $153.00
1
Specification for Oil-Field Belting, 10th ed. 1947, 11th ed. 1952,
12th ed. 1957
Chapter 11.2.1M
1A
Specification for Oil-Field Flat Belting, 1st ed. 1957
Compressibility Factors for Hydrocarbons: 638-1074 Kilograms per
1B
Specification of Oil-Field V-Belting, 1st ed. 1957, 2nd ed. 1959,
Cubic Meter Range
3rd ed. 1961, 4th ed. 1964, 5th ed. 1978, 6th ed. 1995
Provides tables in metric (SI) units to correct hydrocarbon volumes metered
2
Oil Field Boilers, 1st ed. 1928-10th ed. 1949
under pressure to corresponding volumes at the equilibrium pressure for the
2A
Planning, Designing, and Constructing Fixed Offshore Platforms,
metered temperature. It contains compressibility factors related to meter
1st ed. 1969, 2nd ed. 1971, 3rd ed. 1972, 4th ed. 1972, 5th ed.
temperature and density (15 °C) of metered material. Pages: 187
1974, 6th ed. 1975, 7th ed. 1976, 8th ed. 1977, 9th ed. 1977,
1st Edition | August 1984 | Reaffirmed, May 1996 | Price: $153.00
10th ed. 1979, 11th ed. 1979, 12th ed. 1981, 13th ed. 1982,
14th ed. 1984, 15th ed. 1986, 16th ed. 1987, 17th ed. 1989,
Chapter 11.2
18th ed. 1991, 19th ed. 1991
CD-ROM and Documentation of Chapters 11.2.1, 11.2.1M, 11.2.3,
2A-LRFD Planning, Designing and Constructing Fixed Offshore Platforms-
11.2.3M
Load and Resistance Factor Design, 1st ed. 1993
Includes tables found in Chapters 11.2.1, 11.2.1M, 11.2.3, and 11.2.3M,
2A-LRFD-S1 Supplement 1 to Planning, Designing and Constructing Fixed Offshore
along with a computer documentation manual containing text information
Platforms-Load and Resistance Factor Design, 1st ed. 1997
from those chapters. The tables, presented in both standard and metric (SI)
2B
Fabricated Structural Steel Pipe, 1st ed. 1969, 2nd ed. 1972, 3rd ed.
units, cover compressibility factors for hydrocarbons and water calibration of
1977
volumetric provers. The tape is 9-track, 1600 bpi, unlabeled, 4-file type, and
2E
Drilling Rig Packaging for Minimum Self-Contained Platforms, 1st ed.
is available in either ASCII or EBCDIC format. Format desired must be
1973
specified when ordering. Now available on disk. Please specify when ordering.
2G
Production Facilities on Offshore Structures, 1st ed. 1974
1st Edition | 1984
2H
Specification for Carbon Manganese Steel Plate for Offshore Platform
Chapter 11.2
Tubular Joints, 1st ed. 1974, 2nd ed. 1979, 3rd ed. 1983, 4th ed.
1986, 5th ed. 1988, 6th ed. 1990, 7th ed. 1993, 8th ed. 1999
Computer Tape Information and Documentation for Chapters
2INT-DG Interim Guidance for Design of Offshore Structures for Hurricane
11.2.1, 11.2.1M, 11.2.3 and 11.2.3M
Conditions, 1st ed. 2007
Provides only the text information from Chapters 11.2.1, 11.2.1M, 11.2.3
2INT-EX Interim Guidance for Assessment of Existing Offshore Structures for
and 11.2.3M, and information pertaining to the use of the magnetic tape
Hurricane Conditions, 1st ed. 2007
described above. The manual is included with orders for the magnetic tape.
2INT-MET Interim Guidance on Hurricane Conditions in the Gulf of Mexico,
Pages: 11
1st ed. 2007
1st Edition | 1984
2J
Bulletin on Comparison of Marine Drilling Riser Analysis, 1st ed. 1977,
2nd ed. 1996
WITHDRAWN IN 2022
2K
Care and Use of Marine Drilling Risers, 1st ed. 1977, 2nd ed. 1982
RP 2023
2L
Planning, Designing, and Constructing Heliports for Fixed Offshore
Guide for Safe Storage and Handling of Heated Petroleum Derived
Platforms, 1st ed. 1978, 2nd ed. 1983, 3rd ed. 1986, 4th ed. 1996
Asphalt Products and Crude Oil Residua
2M
Qualifications Testing of Steel Anchor Designs for Floating Structures,
3rd Edition | August 2001
2nd ed. 1996
2P
The Analysis of Spread Mooring Systems for Floating Drilling Units,
WITHDRAWN PUBLICATIONS
1st ed. 1984
2Q
Design and Operation of Marine Drilling Riser Systems, 1st ed. 1982,
The documents listed in this section have been withdrawn and are no longer
2nd ed. 1984
being maintained by the responsible standards committee. Copies of these
3
Recommended Practice for Cable Drilling and Fishing Tools, 1st ed.
documents are available for purchase at www.api.org/publications.
1928, 2nd ed. 1988
Exploration and Production
3
Specification for Cable-Drilling Tools, 1st ed. 1928-13th ed. 1988
Glossary of Oil Field Production Terminology, 1st ed. 1988
4
Standard Rigs and Derricks, 2nd ed. 1934-13th ed. 1947
Needs Assessment Survey Report, Product/Service Certification in the
4A
Steel Derricks (Including Standard Rigs), 14th ed. 1952-16th ed.
Exploration & Production Sector of the Worldwide Oil and Gas Industry
1967
180
Historical Publications
To purchase individual API standards, visit apiwebstore.org
4B
Wooden Derricks, 14th ed. 1952
6AR Recommended Practice for Repair and Remanufacture of Wellhead
and Christmas Tree Equipment, 1st ed. 1994
4C
Rig Irons, 8th ed. 1939
6A4
Specification for Repair and Remanufacture of Wellhead and
4D
Guyed Portable Masts, 1st ed. 1952-6th ed. 1967
Christmas Tree Equipment, 1st ed. 1988
4E
Drilling and Well Servicing Structures, 1st ed. 1970-3rd ed. 1988
6A718 Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and
5
Care and Use of Oil Country Tubular Goods, 1st ed. 1929
Production Equipment, 1st ed. 2004, 2nd ed. 2009
5A
Sharp-Thread Casing and Tubing, 3rd ed. 1955-39th ed. 1987
6B
Ring-Joint Flanges, 4th ed. 1949-6th ed. 1960
5A1
Minimum Performance Properties Proposed API High-Strength Casing
6BX
Ring-Joint Flanges for Drilling and Production Service for Extreme
Joints, 3rd ed. 1949
Pressures, 1st ed. 1958-3rd ed. 1960
5A2
High-Pressure Thread Compound, 1st ed. 1952-5th ed. 1972
6C
Flanged Steel Gate and Plug Valves for Drilling and Production Service,
5A4
Care and Use of Reinforced Thermosetting Resin Casing and Tubing,
7th ed. 1949-11th ed. 1960
1st ed. 1976
6CM Flanged Steel Gate and Plug Valves for Multiple Parallel String
5AC
Casing and Tubing for Sulfide Service, 1st ed. 1963-16th ed. 1987
Completions In Production Service, 1st ed. 1960
5AQ
Q125 Casing, 1st ed. 1985, 2nd ed. 1987
6E
Wellhead Equipment, 2nd ed. 1950-6th ed. 1960
5AR
Reinforced Thermosetting Resin Casing and Tubing, 1st ed. 1975,
6F
Fire Test for Valves, 1st ed. 1978-3rd ed. 1982
2nd ed. 1981
6FC
Specification for Fire Test for Valves with Automatic Backseats, 4th ed.
5AX
High-Strength Casing and Tubing, 1st ed. 1960-15th ed. 1987
2009
5C2
Performance Properties of Casing and Tubing, 4th ed. 1948-21st ed.
6FD Specification for Fire Test for Check Valves, 1st ed. 1995
1999
6G
Through Flowline (TFL) Pump Down Systems, 1st ed. 1978-3rd ed.
5C4
Round Thread Casing Joint Strength with Combined Internal Pressure
1982
and Bending, 2nd ed. 1987
6H
Specification on End Closures, Connectors, and Swivels, 2nd ed. 1998
5C7
Recommended Practice for Coiled Tubing Operations in Oil and Gas
6RS
Referenced Standards for Committee 6, Standardization of Valves and
Well Services, 1st ed. 1996
Wellhead Equipment, 1st ed. 1990
5CTM
Casing and Tubing (Metric Units), 5th ed. 1995
7
Transmission Standard, 1st ed. 1922-6th ed. 1944
5D
Conversion of English to Metric Units as Applicable to API Standards on
7
Rotary Drilling Equipment, 11th ed. 1953-36th ed. 1989, 40th ed.
Tubular Goods, 1st ed. 1960
2001
5D
Specification for Drill Pipe, 1st ed. 1988, 2nd ed. 1991
7A
Recommended Practice for Hard Facing Rotary Bits, 1st ed. 1932
5G1
Iron and Steel Flanged Gate, Plug, and Check Valves for Pipe Line
7A1
Recommended Practice for Testing of Thread Compound for Rotary
Service, 4th ed. 1946
Shouldered Connections, 1st ed. 1992
5G2
Steel Flanged Gate and Plug Valves for Drilling and Production Service,
7B
Rotary Drilling Equipment, 1st ed. 1927-10th ed. 1947
5th ed. 1946
7B-11C Internal-Combustion Engines and Unit-Type Radiator coolers for Oil-Field
5L2
Recommended Practice for Internal Coating of Line Pipe for Non-
Service, 6th ed. 1953-9th ed. 1994
Corrosive Gas Transmission Service, 4th ed. 2002
7C
Dimensional Standards for Line Shafts, 1st ed. 1927
5L4
Care and Use of Reinforced Thermosetting Resin Line Pipe, 1st ed.
7C-11F Installation, Maintenance, and Operation of Internal-Combustion
1972, 2nd ed. 1976
Engines, 2nd ed. 1955-5th ed. 1994
5L5
Marine Transportation of Line Pipe, 1st ed. 1975
7C-11G Rating of Drilling and Production Hoisting Equipment, 1st ed. 1949
5L6
Transportation of Line Pipe on Inland Waterways, 1st ed. 1979
7D
Oil-Field Boilers, 10th ed. 1949
5L7
Recommended Practice for Unprimed Internal Fusion Bonded Epoxy
7E
Care and Use of Oil-Field Boilers, 3rd ed. 1949
Coating of Line Pipe, 2nd ed. 1988
7H
Drilling Machinery, 1st ed. 1979-7th ed. 1981
5L9
External Fusion Bonded Epoxy Coating of Line Pipe, 1st ed. 2001
7J
Specification for Drill Pipe/Casing Protectors (DP/CP), 1st ed. 1985
5LA
Aluminum Alloy Line Pipe, 1st ed. 1962
8A
Specification for Drilling and Production Equipment, 1st ed. 1949-
5LE
Polyethylene Line Pipe, 1st ed. 1975-3rd ed. 1981
11th ed. 1985, 13th ed. 1997
5LP
Thermoplastic Line Pipe, 1st ed. 1968-5th ed. 1981
8B
Internal-Combustion Engines and Unit-Type Radiator Coolers and Oil-
5LR
Glass Fiber Reinforced Thermosetting Resin Line Pipe, 1st ed. 1968-
Field Service, 6th ed. 1953
4th ed. 1976
8C
Installation, Maintenance, and Operation of Internal-Combustion
5LS
Spiral-Weld Line Pipe, 1st ed. 1965-12th ed. 1982
Engines, 1st ed. 1953-3rd ed. 1997
5LU
Ultra High-Test Heat Treated Line Pipe, 1st ed. 1972-3rd ed. 1980
10
Safe Practices in Drilling Operations, 1953
5LX
High-Test Line Pipe, 1st ed. 1948-24th ed. 1982
10
Materials and Testing for Well Cements, 1st ed. 1982-5th ed. 1990
5SI
Recommended Practice for Purchaser Representative Surveillance
10B
Recommended Practice for Testing Oil-Well Cements, 3rd ed. 1953-
and/or Inspection at the Supplier, 1st ed. 2006
22nd ed. 1997
5UO1
Voluntary Unit Agreement, 4th ed. 1993
10C Oil-Well Cement Nomenclature, 1st ed. 1963, 3rd ed. 1984
5UO2
Voluntary Unit Operating Agreement, 4th ed. 1993
10E Application of Cement Lining to Steel Tubular Goods, Handling,
5UO3
Statutory Unit Agreement, 2nd ed. 1993
Installation and Joining, 1st ed. 1978-3rd ed. 1994
5UO4
Statutory Unit Operating Agreement, 2nd ed. 1993
11A Care and Use of Oil Well Pumps, 1st ed. 1927-7th ed. 1944
6
Rig Irons, 1st ed. 1929
11B Installation, Operation and Care of Oil Field Gas Engines, 1st ed. 1933
6
Safe Practices in Well-Pulling Operations, 1956
11C Internal Combustion Engine and Clutches for Oil Field Service, 1st ed.
1927-5th ed. 1942
6A1
Obsolete Appendixes from Spec 6A Eleventh Edition (Wellhead
Equipment), 1st ed. 1979
11C Reinforced Plastic Sucker Rods, 1st ed. 1986, 2nd ed. 1988
6AB
30,000 PSI Flanged Wellhead Equipment, 1st ed. 1983
11D Miscellaneous Pumping Equipment, 1st ed. 1923-7th ed. 1964
181
Historical Publications
To purchase individual API standards, visit apiwebstore.org
11D2
Progressing Cavity Pump Systems for Artificial Lift-Pumps, 1st ed.
14BM User’s Manual for API 14B Subsurface Controlled Subsurface Safety
2010
Valve Sizing computer Program, 1st ed. 1974, 2nd ed. 1978
11D3
Progressing Cavity Pump Systems for Artificial Lift-Surface-Drive
14D Wellhead Surface Safety Valves for Offshore Service, 1st ed. 1975-
Systems, 1st ed. 2008
9th ed. 1994
11G
Rating of Sucker Rod and Tubing Hoisting Equipment, 2nd ed. 1941
14H Surface Safety Valves and Underwater Safety Valves Offshore, 1st ed.
1982-4th ed. 1994, 5th ed. 2007
11H
Recommended Practice for Electrical Surface Pumping Equipment,
1st ed. 1959
15A4
Care and Use of Reinforced Thermosetting Resin Casing and Tubing,
1st ed. 1976
11IW
Specification for Independent Wellhead Equipment, 1st ed. 2000
15AR Reinforced Thermosetting Resin Casing and Tubing, 2nd ed. 1981,
11J
Recommended Practice for Placement of Electrical Equipment on
3rd ed. 1987
Production Leases, 1st ed. 1961
15HR Specification for High Pressure Fiberglass Line Pipe, 1st ed. 1988
11K
Data Sheet for the Design of Air Exchange Coolers for Packaged
Compressor Units, 1st ed. 1974, 2nd ed. 1998
15L4
Care and Use of Reinforced Thermosetting Resin Line Pipe, 2nd ed.
1976
11L
Recommended Practice for Design Calculations for Sucker Rod
Pumping systems, 1st ed. 1967-4th ed. 1988
15LP Thermoplastic Line Pipe, 5th ed. 1981, 6th ed. 1987
11L4
Curves for Selecting Beam Pumping Units, 1st ed. 1970
15LT PVC Lined Steel Tubular Goods, 1st ed. 1993
11M
Recommended Practice for Grounded 830-Volt, Three-Phase Electrical
16E Design of Control Systems for Drilling Well Control Equipment, 1st ed.
System for Oil Field Service, 1st ed. 1973
1990
11N
Specification for Lease Automatic Custody Transfer (LACT) Equipment,
16J Comparison of Marine Drilling Riser Analyses, 1st ed. 1992
1st ed. 1975-4th ed. 1994
16R Specification for Marine Drilling Riser Couplings, 1st ed. 1997
11P
Specification for Packaged High Speed Separable Engine Driven
17C Recommended Practice on TFL (Through Flowline) Systems, 2nd ed.
Reciprocating Gas Compressors, 1st ed. 1975, 2nd ed. 1989
2002
11PGT
Recommended Practice for Packaged Combustion Gas Turbines,
17I
Installation of Subsea Umbilicals, 1st ed. 1996
1st ed. 1992
17M
Recommended Practices on Remotely Operated Tool (ROT)
11R
Recommended Practice for Electric Submersible Pump Installations,
Intervention Systems, 1st ed. 2004
1st ed. 1980-2nd ed. 1986
17TR15 API 17H Hydraulic Interfaces for Hot Stabs, 1st ed. 2017
11T
Recommended Practice for Installation and Operation of Wet Steam
18TR2 Guidance to API Specification Q2, 1st ed. 2017
Generators, 1st ed. 1983, 2nd ed. 1994
19G5
Operation, Maintenance, Surveillance, and Troubleshooting of Gas-Lift
11U
Recommended Practice for Sizing and Selection of Electric
Installations, 1st ed. 2019
Submersible Pumps, 1st ed. 1984-2nd ed. 1986
19G9
Design, Operation, and Troubleshooting of Dual Gas-Lift Wells, 2nd ed.
11V1
Specification for Gas Lift Valves, Orifices, Reverse Flow Valves and
2015
Dummy Valves, 1st ed. 1988, 2nd ed. 1995
19G10 Design and Operation of Intermittent Gas-Lift Systems, 1st ed. 2018
11V2
Gas Lift Valve Performance Testing, 2nd ed. 2001
19G11 Dynamic Simulation of Gas-Lift Wells and Systems, 1st ed. 2018
11V5
Recommended Practices for Operation, Maintenance, Surveillance,
and Troubleshooting of Gas-Lift Installations, 3rd ed. 2008
25
Measuring Field Production and Storage Tanks, 1st ed. 1929-7th ed.
11V6
Recommended Practice for Design of Continuous Flow Gas Lift
1948
Installations Using Injection Pressure Operated Valves, 2nd ed. 1999
26
Form of Agreement and Specifications for Pipe Line Crossings under
Railroad Tracks, 1st ed. 1935
11V7
Recommended Practice for Repair, Testing and Setting Gas Lift Valves,
2nd ed. 1999
27
Standard for Determining Permeability of Porous Media, 1st ed. 1935-
3rd ed. 1952
11V8
Recommended Practice for Gas Lift System Design and Performance
Prediction, 1st ed. 2003
28
Code of Metallurgical Terms for Ferrous Alloys, 1st ed. 1937
11V10 Recommended Practices for Design and Operation of Intermittent and
29
Standard Field Procedure for Testing Drilling Fluids, 2nd ed. 1942-
Chamber Gas-Lift Wells and Systems, 1st ed. 2008
4th ed. 1957
12A Specification for Standard Tanks with Riveted Shells, 1st ed. 1928-
30
Corrosion Fatigue Testing of Sucker Rod Materials, 1st ed. 1945
7th ed. 1941
31
Standard Electrical Log Form, 1st ed. 1948-3rd ed. 1967
12C All-Welded Oil Storage Tanks, 1st ed. 1936-15th ed. 1958
32
Testing Cements Used In Wells, 1st ed. 1948, 2nd ed. 1950
12D Large Welded Production Tanks, 3rd ed. 1944-10th ed. 1994
33
Standard Radioactivity Log Form, 1st ed. 1948-3rd ed. 1974
12E Wooden Tanks, 1st ed. 1943-6th ed. 1956
34
Standard Hydrocarbon Mud Log Form, 1st ed. 1958
12G Welded Aluminum-Alloy Storage Tanks, 1st ed. 1957
35
Oil-Mapping Symbols, 1st ed. 1957
12GDU Specification for Glycol-Type Gas Dehydration Units, 1st ed. 1990
36
Determining Productivity Indices, 1st ed. 1958
12H Recommended Practice for Installation of New Bottoms In Old Storage
37
Recommended Practice Proof-Test Procedure for the Evaluation of
Tanks, 1st ed. 1957
High-Pressure Casing and Tubing Connection Designs, 1st ed. 1958,
12L Vertical Emulsion Treaters, 1st ed. 1967-4th ed. 1994
2nd ed. 1980
12M Oil Field Thermal Recovery Steam Generators, 1st ed. 1966, 2nd ed.
38
Biological Analysis of Water-Flood Injection Waters, 1st ed. 1959-
1967
3rd ed. 1975
13B Standard Procedure for Testing Drilling Fluids, 1st ed. 1962-14th ed.
39
Standard Procedure for the Evaluation of Hydraulic Fracturing Fluids,
1991
1st ed. 1960-3rd ed. 1998
13E Recommended Practice for Shale Shaker screen Cloth Designation,
40
Core-Analysis Procedure, 1st ed. 1960, 2nd ed. 1998
1st ed. 1977-3rd ed. 1993
41
Recommended Practice Standard Procedure for Preventing
13F Drilling Mud Report Form, 1st ed. 1981
Performance Data on Hydraulic Fracturing Equipment, 1st ed. 1961
13G Drilling Fluid Bioassays, 1st ed. 1984-3rd ed. 1991
182
Historical Publications
To purchase individual API standards, visit apiwebstore.org
42
Laboratory Testing and Field Data Analysis of Surface-Active Agents for
D15
Recommendations for Proper Usage and Handling of Inhibited Oilfield
Well Stimulation, 1st ed. 1962, 2nd ed. 1977
Acids, 1st ed. 1973
43
Standard Procedure for Evaluation of Well Perforators, 1st ed. 1962-
D17
Running and Cementing Liners in the Delaware Basin, Texas, 2nd ed.
5th ed. 1991
1983, 3rd ed. 1989
44
Sampling Petroleum Reservoir Fluids, 1st ed. 1966, 2nd ed. 2003
D18
Environmental Protection Laws and Regulations Related to Exploration,
Drilling, Production, and Gas Processing Plant Operations, 1st ed.
46
Testing Foam Agents for Mist Drilling, 1st ed. 1966
1975
47
Drilling Mud Report Form, 1st ed. 1969
D19
Summary and Analysis of API Onshore Drilling Mud and Produced
48
Drill Stem Test Report Form, 1st ed. 1972
Water Environmental Studies, 1st ed. 1983
50A
Measuring, Sampling, and Testing Natural Gas, 1st ed. 1937-4th ed.
D20
Bulletin on Directional Drilling Survey Calculation Methods and
1957
Terminology, 1st ed. 1985
50B
Measuring, Sampling, and Testing Natural Gasoline and Other Light
S2
Publications of the API Division of Production, 26th ed. 1948-
Liquid Petroleum Hydrocarbons, 3rd ed. 1949, 4th ed. 1957
62nd ed. 1985
56
Recommended Practices for Testing Sand Used in Hydraulic Fracturing
T1
Function and Procedure of Committees on Training of the Division of
Operations, 1st ed. 1983
Production, 5th ed. 1967
57
Offshore Well Completion, Servicing, Workover, and Plug and
T3
Vocational Training Courses, 1st ed. 1959
Abandonment Operations, 1st ed. 1986
T4
Supervisory Development Services Available from Public and Private
58
Recommended Practices for Testing Sand Used in Gravel Packing
Agencies and Institutions, 1st ed. 1953
Operations, 1st ed. 1986
T3
Training and Qualification of Personnel in Well Control Equipment and
60
Recommended Practices for Testing High Strength Proppants Used in
Techniques for Drilling on Offshore Locations, 1st ed. 1976
Hydraulic Fracturing Operations, 1st ed. 1989
T5
Employee Motivation Programs for Safety and Prevention of Pollution in
61
Recommended Practices for Evaluating Short Term Proppant Pack
Offshore Operations, 1st ed. 1974, 2nd ed. 1983
Conductivity, 1st ed. 1989
V2
Organization and Teaching of Courses on Specialized Vocational
62
Recommended Practice/Guidelines for Evaluation of Mobile Offshore
Training In the Production of Oil and Gas, 1st ed. 1949
Drilling Unit (MODU) Emergency Power Systems and Fire Protection
V3
Information Bulletin Special Training Available for Leaders on Conduct
Systems, 1st ed. 1988
of Foremanship Training Conferences, 1st ed, 1951
63
Evaluation of Polymers Used in Enhanced Oil Recovery Operations,
1st ed. 1990
Refining
66
Exploration and Production Data Digital Interchange (Version 2.00),
Biological Treatment of Petroleum Refinery Wastes, 1st ed. 1963
2nd ed. 1996
Disposal of Refinery Waste, 1st ed. 1930-7th ed. 1963
86
Recommended Practice for Measurement of Multiphase Flow
Section II Waste Gases and Vapors 1st ed. 1931-5th ed. 1957
(superseded by API MPMS Ch. 20.3), 1st ed. 2005
Section III Waste Water Containing Solute, 1st ed. 1935-4th ed. 1960
95F
Interim Guidance for Gulf of Mexico MODU Mooring Practice, 1st ed.
2006
Section IV Sampling and Analysis of Waste Water, 1st ed. 1953
D2
Organization and Procedure for the Central Committee on District
Section V, Sampling and Analysis of Waste Gas and Particulate Matter,
Activities and for Districts and Chapters, 3rd ed. 1941-8th ed. 1955
1st ed. 1954
D2A
Vocational Training in Oil and Gas Production, 1st ed. 1940, 2nd ed. 1943
Section VI, Disposal of Refinery Wastes, 1st ed. 1963
D2A
Planning and Conducting an API District Meeting, 2nd ed. 1957,
Inspection of Refinery Equipment, 1985
3rd ed. 1958
Chapter 1, Guide for Inspection of Refinery Equipment, 1976
D2B
Informational Bulletin Special Training Available for Leaders on
Chapter 3, Inspection Planning, 1985
Conduct of Foremanship Training Conferences, 1st ed. 1942
Chapter 4, Inspection Tools, 1983
D3
Activities and Procedure of the Central Committee on Drilling and
Chapter 5, Preparation of Equipment for Safe Entry and Work, 1978
Production Practice, 1st ed. 1936-8th ed. 1965
Chapter 6, Pressure Vessels (Towers, Drums, and Reactors), 1982
D4
The Effects of Drilling-Mud Additives on Oil-Well Cements, 1st ed.
1951, Corrected 1963
Chapter 7, Heat Exchangers, Condensers and Cooler Boxes, Guide for
Inspection of Refinery Equipment, 1967
D6
Selection and Evaluation of Well-Completion Methods, 1st ed. 1955
Chapter 9, Fired Heaters and Stacks, 1981
D7
Casing Landing Recommendations, 1st ed. 1955
Chapter 10, Pumps, Compressors, and Blowers, and Their Drivers
D8
A Tabular Method for Determining the Change of the Overall Angle and
Dog-Leg Severity (for Hole Inclinations up to 70 degrees), 1st ed. 1964
Chapter 11, Pipe, Valves, and Fittings, 1974
D9
Recommendations for Digital Well Logging on Magnetic Tape, 1st ed.
Chapter 13, Atmospheric and Low-Pressure Storage Tanks, 1981
1965-3rd ed. 1981
Chapter 14, Electrical Systems, 1982
D10
Selecting Rotary Drilling Equipment, 1st ed. 1965, 2nd ed. 1973
Chapter 15, Instruments and Control Equipment, 1981
D11
Glossary of Drilling-Fluid and Associated Terms, 1st ed. 1965, 2nd ed.
Chapter 16, Pressure-relieving Devices, 1985
1979
Chapter 17, Auxiliary and Miscellaneous Equipment, 1978
D12
Well Data Glossary, 1st ed. 1966
Chapter 18, Protection of Idle Equipment, 1982
D12A
The API Well Number and Standard State and County Codes, 1st ed.
Chapter 20, Inspection for Fire Protection, 1961
1968
Manual for the Prevention of Water Pollution During Marine Oil Terminal Transfer
D13
Installation and Use of Blowout-Preventer Stacks and Accessory
Operations, 1st ed. 1964
Equipment, 1st ed. 1966
Manual on Disposal of Refinery Wastes, 1st 1969
D14
A Statistical Study of Recovery Efficiency, 1st ed. 1967, 2nd ed. 1984
Chapter 1, Introduction, 1969
183
Historical Publications
To purchase individual API standards, visit apiwebstore.org
Chapter 2, Information on Water Pollution, 1969
Section 8, Seals, Purges, and Winterizing, 3rd ed. 1974, 4th ed. 1980
Chapter 3, Collection and Treatment, 1969
Section 9, Air Supply Systems, 3rd ed. 1974, 4th ed. 1980
Chapter 4, Liquid Flow Measurement Methods, 1969
Section 10, Hydraulic Systems, 3rd ed. 1974, 4th ed. 1980
Chapter 5, Oil Water Separator Process Design, 1969
Section 11, Electrical Power Supply, 3rd ed. 1981
Chapter 6, Construction Details of Gravity-Type Separators
Section 12, Control Centers, 3rd ed. 1977
Chapter 7, Ballast Water
Section 13, Alarms and Protective Devices, 3rd ed. 1976, 4th ed.
1985
Chapter 8, Treatment of Recovered Oil Emulsions
Section 14, Process Computer Systems, 1st ed. 1982
Chapter 9, Filtration, Flocculation, and Flotation
550
Part II-Process Stream Analyzers
Chapter 10, Stripping, Extraction, Adsorption, and Ion Exchange
Section 1, Analyzers, 4th ed. 1985
Chapter 11, Oxidation, 1969
Section 2, Process Chromatographs, 4th ed. 1981
Chapter 12, Oxygenation, 1969
Section 4, Moisture Analyzers, 4th ed. 1983
Chapter 13, Biological Treatment, 1975
Section 5, Oxygen Analyzers, 3rd ed. 1997, 4th ed. 1983
Chapter 14, Disposal by Sale, at Sea, in Wells, and Incineration, 1969
Section 6, Analyzers for the Measurement of Sulfur and Its
Chapter 15, Common Refinery Wastes and Process Summaries, 1969
Components, 4th ed. 1984
Chapter 16, Petrochemical Waste Treatment, 1969
Section 7, Electrochemical Liquid Analyzers, 4th ed. 1984
Chapter 17, Monitoring, 1969
Section 9, Water Quality Analyzers, 4th ed. 1984
Chapter 18, Diffusion of Effluent into Receiving Waters, 1969
Section 10, Area Safety Monitors, 4th ed. 1983
Chapter 19, Stream Survey Methods, 1969
550
Part III, Fired Heaters and Inert Gas Generators, 3rd ed. 1985
Chapter 20, Solubility and Toxicity Data, 1969
550
Part IV, Installation of Refinery Instruments and Control System, 1st ed.
Chapter 21, Handling Stormwater Runoff, 1980
1975, 2nd ed. 1984
“Responding to a Pipeline Emergency” Videotape
589
Fire Test for Evaluation of Valve Stem Packing, 2nd ed. 1998
421
Management of Water Discharges: Design and Operation of Oil-Water
590
Steel Line Blanks, 1st ed. 1985
Separators, 1st ed. 1990
593
Ductile Iron Plug Valves, 1st ed. 1973, 2nd ed. 1981
500
Classification of Areas for Electrical Installations in Petroleum
594
Wafer-Type Check Valves, 1st ed. 1974-5th ed. 1997
Refineries, 1st ed. 1955-4th ed. 1987
595
Cast-Iron Gate Valves, Flanges Ends, 2nd ed. 1979
500C
Recommended Practice for Classification of Areas for Electrical
Installations at Petroleum and Gas Pipeline Transportation Facilities,
597
Steel Venturi Gate Valves, 1st ed. 1968-3rd ed. 1981
1st ed. 1966 to 1984
600A
API Standard on Flanged Steel Outside-Screw-and Yoke Wedge Gate
520
Design and Construction of Pressure-Relieving Systems in Refineries,
Valves, 1st ed. 1942
1st ed. 1955-4th ed. 1994
600B
API Standard on Flanged Steel Plug Valves, 1st ed. 1942
525
Testing Procedure for Pressure-Relieving Devices Discharging Against
601
Metallic Gaskets for Piping, 3rd ed. 1972-7th ed. 1988
Variable Back Pressure, 1st ed. 1960
Replaced by ASME B16.20
528
API Standard for Safety Relief Valve Nameplate Nomenclature, 1st ed.
604
Flanged Nodular Iron Gate and Plug Valves for Refinery Use, 1st ed.
1964
1963-4th ed. 1981
532
Measurement of the Thermal Efficiency of Fired Process Heaters,
605
Large-Diameter Carbon Steel Flanges, 1st ed. 1967-4th ed. 1988
1st ed. 1982
606
Compact Carbon Steel Gate Valves, 1st ed. 1976-3rd ed. 1989
533
Air Preheat Systems for Fired Process Heaters, 1st ed. 1986
630
Tube Dimensions for Fired Heaters, 1st ed. 1959, 2nd ed. 1961
542
Grouped Motor Controller Specification-Low Voltage (600 Volts),
631M
Measurement of Noise from Air-Cooled Heat Exchangers, 1st ed. 1981
1st ed. 1977
632
Winterization of Air-Cooled Heat Exchangers, 1st ed. 1988
543
Medium Voltage Motor Controllers, 1st ed.1976
640
Tube Dimensions for Heat Exchangers, 1st ed. 1959, 2nd ed. 1961
544
Metal-Clad Switchgear Specification-5kV to 15 kV, 1st ed. 1980
662
Plate Heat Exchangers for General Refinery Services, 1st ed. 1995,
545
Recommended Practice for Lightning Protection of Aboveground
2nd ed. 2002
Storage Tanks for Flammable or Combustible Liquids, 1st ed. 2009
662
Plate Heat Exchangers for General Refinery Services, Part 1-Plate-
545-A
Verification of Lightning Protection Requirements for Above Ground
and-Frame Heat Exchangers, 1st ed. 2006
Hydrocarbon Storage Tanks, 1st ed. 2009
662
Plate Heat Exchangers for General Refinery Services, Part 2-Brazed
550
Installation of Refinery Instruments and Control Systems, 1st ed.-
Aluminum Plate-Fin Heat Exchangers, 1st ed. 2006
4th ed.
665
API Fired Heater Data Sheet, 1st ed. 1966
Part I-Process Instrumentation and Control
678
Accelerometer-Based Vibration Monitoring System, 1st ed. 1981
Section 1, Flow, 3rd ed. 1974, 4th ed. 1986
680
Packaged Reciprocating Plant and Instrument Air Compressors for
Section 2, Level, 4th ed. 1980
General Refinery Services, 1st ed. 1987
Section 3, Temperature, 3rd ed. 1965, 4th ed. 1980
683
Quality Improvement Manual for Mechanical Equipment in Petroleum,
Section 4, Pressure, 3rd ed. 1974, 4th ed. 1980
Chemical, and Gas Industries, 1st ed. 1993
Section 5, Controllers and Control Systems, 3rd ed. 1977, 4th ed.
689
Collection and Exchange of Reliability and Maintenance Data for
1985
Equipment, 1st ed. 2007
Section 6, Control Valves and Accessories, 3rd ed. 1976, 4th ed.
700
Checklist for Plant Completion, 1st ed. 1972, 2nd ed. 1981
1985
752
Equal Employment Opportunity: An Interpretive Guide, 1st 1972, 2nd.
Section 7, Transmissions Systems, 3rd ed. 1974
2003
184
Historical Publications
To purchase individual API standards, visit apiwebstore.org
753
How to Install and Validate Employee Selection Techniques, 1st 1971
1200
Federally Mandated Training 1st ed. 1994-3rd ed. 1998
754
Validity Study Results for Jobs Relevant to the Petroleum Refining
1200E Electronic Curriculums Manager for Federally Mandated Training and
Industry, 1st 1972
Information 1st ed. 1996, 2nd ed. 1999
755
Interpretive Guide for the API Test Validity Generalization Project, 1st,
1210 Trainer Competencies, 1st ed. 1994
1980, 2nd 1982
1220
Guidelines for Evaluating Vendors and Training Programs. 1st ed. 1998
756
Recommended Guidelines for Documentation of Training, 1st 1977
Security
757
Training and Materials Catalog, 1st 1979
API Standard for Third Party Network Connectivity, 1st ed. 2007
758
Safety Digest of Lessons Learned
Security Guidelines for the Petroleum Industry, 3rd ed. 2005
Section 1, General Safety Precautions in Refining 1986
Security Vulnerability Assessment Methodology for the Petroleum and
Section 2, Safety in Unit Operations, 1979
Petrochemical Industries, 1st ed. 2003, 2nd ed. 2004
Section 3, Safe Operations of Auxiliaries, 1980
Transportation
Section 4, Safety in Maintenance, 1981
Proceedings of the 1992 API Tanker Conference
Section 5, Safe Operation of Utilities, 1981
Training and Qualification of Liquid Pipeline Maintenance Personnel 1st ed. 1992
Section 6, Safe Operation of Storage Facilities, 1982
998
Technical Data Book-Petroleum Refining, Metric ed.
Section 7, Safe Handling of Petroleum Products, 1983
1001
API Specifications for Tank Vehicles, 1st ed. 1937, 2nd ed. 1946
Section 8, Environmental Controls,1983
1003
Precautions Against Electrostatic Ignition During Loading of Tank Motor
Section 9, Precautions Against Severe Weather Conditions, 1983
Vehicles, 1st ed. 1965-3rd ed. 1986
850
API Standards 620, 650, and 653 Interpretations-Tank Construction
1006
The Loading and Unloading of Unleaded Gasoline by Tank Motor
and In-Service Inspection, 1st ed. 1997
Vehicles, 1st ed. 1974
910
Digest of State Boiler and Pressure Vessel Rules and Regulations,
1101
Measurement of Petroleum Liquid Hydrocarbons by Positive
1st ed. 1987-5th ed. 1991
Displacement Meter, 1st ed. 1960
920
Prevention of Brittle Fracture of Pressure Vessels, 1st ed. 1990
1103
Bulletin on Recommended Practices in the Setting, Connecting,
Maintenance and Operation of Lease Tanks, 1st ed. 1951-4th ed.
926
Digest of State Inspection Laws-Petroleum Products, 5th ed. 1989
1965
927
1972 Sour Water Stripping Survey Evaluation, 1st ed. 1972
1105
Bulletin on Construction Practices for Oil and Products Pipe Lines,
928
Hydrocarbon Emissions from Refineries, 1st ed. 1973
1st ed. 1955
937
Evaluation of Design Criteria for Storage Tanks with Frangible Roof
1106
Bulletin on a Classification of Communications Circuits for Use in
Joints, 1st ed. 1996
Automation in the Oil Industry, 1st ed. 1959, 2nd ed. 1961
940
Steel Deterioration in Hydrogen, 1st ed. 1967
1107
Recommended Pipe Line Maintenance Welding Practices, 1st ed.
942
Welded, Plain Carbon Steel Refinery Equipment for Environmental
1966, 2nd ed. 1978
Cracking Service, 1st ed. 1971, 2nd ed. 1982
1113
Developing a Pipeline Supervisory Control Center, 1st ed. 2007
943
High-Temperature Crude Oil Corrosivity Studies, 1st ed. 1974
1114
Recommended Practice for the Design of Solution-Mined Underground
944
1972 Survey of Materials Experience and Corrosion Problems in Sour
Storage Facilities, 1st ed. 1994, 2nd ed. 2013
Water Strippers, 1st ed. 1974
1118
Training and Qualification of Liquid Pipeline Controllers, 1st ed. 1991
945
A Study of the Effects of High-Temperature, High-Pressure Hydrogen on
1119
Training and Qualification of Liquid Pipeline Operators, 1st ed. 1991
Low-Alloy Steels, 1st ed. 1975, 2nd ed. 1997
1120
Training and Qualification of Liquid Pipeline Maintenance Personnel,
946
The Effect of Outgassing Cycles on the Hydrogen Content in
1st ed. 1992
Petrochemical Reactor-Vessel Steels, 1st ed. 1975, 2nd ed. 1981
1122
Emergency Preparedness and Response for Hazardous Liquids
947
Granular Media Filtration of Petroleum Refinery Effluent Waters, 1st ed.
Pipelines, 1st 1991
1975
1123
Development of Public Awareness Programs by Hazardous Liquid
948
A Study of Variables that Affect the Corrosion of Water Strippers,
Pipeline Operators, 2nd ed. 1996
1st ed. 1976
1129
Assurance of Hazardous Liquid Pipeline System Integrity, 1st ed. 1996
949
Water Reuse Studies, 1st ed. 1977
1132
Effects of Oxygenated Fuels and Reformulated Diesel Fuels on
950
Survey of Construction Materials and Corrosion in Sour Water
Elastomers and Polymers in Pipeline/Terminal Components, 1994
Strippers-, 1st ed. 1978, 2nd ed. 1983
1139
Training Guidelines for Tank Ship Personnel, 1st ed. 1992, 2nd ed.
952
Gaussion Dispersion Models Applicable to Refinery Emission, 1st ed.
1993
1972
1140
Guidelines for Developing Bridge Management Teams, 1st ed. 1991
953
Pilot Studies on Enhancement of the Refinery Activated Sludge
1155
Evaluation Methodology for Software-based Leak Detection Systems,
Process, 1st ed. 1977
1st ed. 1995
954
Evaluation of Ammonia “Fixation” Components in Actual Refinery Sour
1156 & 1156-A Effects of Smooth and Rock Dents on Liquid Petroleum
Waters, 1st ed. 1978
Pipelines, Phase I and Phase II, 1st ed. 1997
955
A New Correlation of NH3, CO2, and H2S Volatility Data from Aqueous
1157
Hydrostatic Test Water Treatment and Disposal Options for Liquid
Sour Water Systems, 1st ed. 1978
Pipeline Systems, 1st ed. 1998
956
Hydrogen-Assisted Crack Growth in 21⁄4 Cr-1⁄2 Mo Steel, 1st ed. 1978
1158
Analysis of DOT Reportable Incidents for Hazardous Liquid Pipelines,
957
Pilot Studies on Activated Carbon Enhancement of the Refinery
1986 through 1996, 1st ed. 1999
Activated Sludge Process-Phase II, 1st ed. 1978
1164
SCADA Security, 1st ed. 2004
958
Pilot Studies on the Toxicity of Effluent from Conventional and Carbon
1201
Code for Tank Car Quantities or Code for Calibrating Tank Car Tanks and
Enhanced Treatment of Refinery Wastewater-Phase III, 1st ed. 1981
for Measuring, Sampling and Calculating Tank Car Quantities (Non-
960
Evaluation of the Principles of Magnetic Water Treatment, 1st ed. 1985
Pressure Type), 1st ed. 1948, 2nd ed. 1957
185
Historical Publications
To purchase individual API standards, visit apiwebstore.org
1202
Code for Pressure Tank Car Quantities or Code for Calibrating Tank Car
1534
Oil Change Practices and Lubrication, 1st ed. 1959
Tanks and for Measuring, Sampling and Calculating Tank Car
1535
Buy on Performance, 1959
Quantities (Pressure Type), 1st ed. 1951, 2nd ed. 1960
1536
Members Handbook on Marketing Division, 1st ed. 1961
2200
Repairing Hazardous Liquid Pipelines, 1st ed. 1973, 2nd ed. 1983,
1537
Literature Pertaining to t he Art Science of Oil Burning for Residential
3rd ed. 1994, 4th ed. 2010, 5th ed. 2015
Applications, 1st ed. 1960, 1537A: 1961, 1537B: 1962
2611
Terminal Piping Inspection-Inspection of In-Service Terminal Piping
1539
Liability and Property Insurance, 1st ed. 1961-5th ed. 1984
Systems, 1st ed. 2011
1542
Aviation Fuels Identification & Airport Equipment Marking and Color
Marine
Coding, 1st ed. 1961-6th ed. 1996
Quantified Hazards Evaluation of Marine Vapor Recovery Systems, 1989
1543
Aviation Fuelers Truck Bottom Loading Systems, 1st ed. 1961
1124
Ship, Barge and Terminal Hydrocarbon Vapor Collection Manifolds,
1545
Opportunity Around the Corner, 1st ed. 1961
1st ed. 1991
1546
How You Can Cooperate with Distributive Education to Develop Dealers
1125
Overfill Control Systems for Tank Barges, 1st ed. 1991
for Tomorrow, 1st ed. 1965
1127
Marine Vapor Control Training Guidelines, 1st ed. 1993
1547
Case Histories in Petroleum Marketing Research, 1st ed. 1962
1141
Guidelines for Confined Space Entry on Board Tank Ships in the
1548
Sources of Petroleum Marketing Statistics, 1st ed. 1963
Petroleum Industry, 1st ed. 1994
1550
Petroleum Marketing Reference Materials, 1st ed. 1963
Marketing
1551
Motor Oil Guide, 1st ed. 1964-6th ed. 1988
1552
Building a Future in a Business of Your Own, 1st ed. 1964, 4th ed.
API Engine Service Classification System: 1989 Licensees, 1st ed. 1990
1967
Statement of Position on Dyeing of Heating Oils, 1st ed. 1974
1553
Using a Break-Even System, 1st ed. 1965
1500
Developing Your Men Builds Profits, 1952
1554
Using Credit to Increase Sales and Profits, 1st ed. 1966
1500
Storage and Handling of Aviation Fuels at Airports, 1st ed. 1976
1555
Do You Get the Best Out Your Men?, 1st ed. 1965
1502
The Installation of Fixed Fuel Handling Equipment at Airports, 1st ed.
1557
Case Studies in Credit for Oil Jobbers, 1st ed. 1966
1952-4th ed. 1963
1558
Check List of On-the-Job Training Experiences for Service Station
1503
The Storage and Handling of Jet Fuels, 1st ed. 1952-5th ed. 1965
Employees, 1st ed. 1965, 2nd ed. 1977
1504
A System of Accounting for Distributors and Jobbers of Petroleum
1559
Service Station Burglaries and Robberies, 1st ed. 1966
Products, 1st ed. 1953, 2nd ed. 1959
1560
Lubricant Service Designations for Automotive Manual Transmissions
1505
Airport Fueling Systems, 1st ed. 1954, 2nd ed. 1961
and Axles, 1st ed. 1966-5th ed. 1981
1506
Service Station Management, 1st ed. 1954
1563
A First Step, 1st ed. 1971
1507
Know Your Motor Oil, 1st ed. 1954-5th ed. 1980
1567
Farm Equipment Lubrication, 1st ed. 1968, 2nd ed. 1976
1508
How to Sell Motor Oil, 1st ed. 1954-4th ed. 1972
1568
Oil Jobber’s Guide to Liability and Property Insurance, 1st ed. 1966
1509
Classification of Internal Combustion Engine Service, 3rd ed. 1965-
1570
Promotional Aids Instructional Materials for Service Station and
7th ed. 1988
Petroleum Marketing Employees, 1st ed. 1967
1509
Engine Oil Licensing and Certification System, 14th ed. 1996
1571
Diesel Fuel Questions and Answers for Your Car, 2nd ed. 1982
1510
Business Tools for Service Station Dealers, 1st ed. 1956
1571
Periodic Motor Vehicle Inspection Programs, Part 1, Procedure
1511
The New API Engine Oil Service Classification Symbol, 1st ed. 1984,
Guidelines, 1st ed. 1967
2nd ed. 1986
1572
Diesel Fuel Questions and Answers for Heavy- Duty Equipment, 1st ed.
1513
Management Institutes Pay off!, 1st ed. 1955
1982
1514
Personal Development Plans, 1st ed. 1955
1572
Part 2, Periodic Motor Vehicle Inspection Programs, Organization
1515
Training of Motor Vehicle Drivers, 1st ed. 1955
Guidelines, 1968
1516
Urban Consumer Expenditures for Transportation, 1st ed. 1955
1573
How to Plug Service Station Profit Leaks, 1st 1968-2nd ed. 1978
1517
Motor Oils and Lubrication, 1st ed. 1956
1574
Pathways to Prestige, 1st ed. 1969
1518
Marketing Research in the Petroleum Industry, 1st ed. 1957
1575
Basics for Service Station Salesmen, 1st ed. 1969
1519
The People in Your Business, 1st ed. 1959
1578
Lubrication of Earth Moving and Other Heavy Duty Equipment, 1st ed.
1970
1520
1993 Directory of ESLS Licensees, 1st ed. 1993
1579
Diesel Fuel Questions & Answers, 1st ed. 1977
1523
Fueling Turbine-Powered Aircraft, 1st ed. 1957-4th ed. 1973
1580
Gasoline Questions & Answers for Your Car, 1st ed. 1982-5th ed.
1524
Study of Crimes Committed at Service Stations, 1st ed. 1957
1988
1525
A Short Course in the Lubrication of Automotive Equipment, 1st ed.
1581
Specifications and Qualification Procedures Aviation Jet Fuel Filter/
1957
Separators, 1st ed. 1973-4th ed. 2000
1526
Petroleum Marketing, 1st ed. 1958
1582
Waste Oil Roundup... No.1, 1st ed. 1972
1527
How to Plan and Organize Management Institute Programs for Oil
1584
API Standard for Four Inch Hydrant System Components and
Marketers, 1st ed. 1958
Arrangements, 1st ed. 1975
1529
Recommended Performance Requirements for Aviation Fueling Hose,
1585
Student Employment Program for Service Stations, 1st ed. 1975
2nd ed. 1963, 3rd ed. 1982
1586
Student Employment Program for Service Stations, 1st ed. 1975
1530B The Choice is Yours Change Your Oil at Least Every 60 Days, 1st ed.
1966
1587
Waste Oil Roundup... No. 3, 1st ed. 1974
1531
Good Plant Practice for Workers Using Petroleum Products, 1st ed.
1588
Energy from Used Lubricating Oils, 1st ed. 1975
1959
1589
Gasoline Marketing Structure Facts Demographics, 1st ed. 1976
1531A
Good Plant Practices for Workers Using Cutting Fluids, 1st ed. 1972
186
Historical Publications
To purchase individual API standards, visit apiwebstore.org
1590
Conversion to ISO Viscosity Measurement Temperatures-40 and 100
1659
Keeping it Clean: Making Safe and Spill-Free Motor Fuel Deliveries,
Celsius, 1st ed. 1977
1st ed. 1992
1591
Recycle Used Motor Oil, 1st ed. 1979-3rd ed. 1988
1800
Corrosion Control Maintenance of Permanently Installed Aviation
Petroleum Storage and Dispensing Systems, 1st ed. 1961, 2nd ed.
1592
Recent Changes in Retail Gasoline Marketing, 1st ed. 1981
1971
1600
Regulations and Ordinances Applying to Petroleum Marketing Facilities,
1st ed. 1959
Safety and Fire Protection
1601
Base Lay-Out of Single-Unit Service Station Pumps or Dispensers,
1A
Cleaning Petroleum Storage Tanks-Section A, Crude Oil and
1st ed. 1959
Unfinished-Products Tanks, 1955
1602
Recommended Standard for Underground Gasoline Tanks, 1st ed.
1B
Cleaning Petroleum Storage Tanks-Section B, Gasoline Tanks, 1955
1959
3
Gas and Electric Cutting and Welding, 1953
1603
Model Ordinance Regulating Curb Cuts and Approaches to Service
4
Organization for Accident Prevention, 1942
Stations, 1st ed. 1959
5
Service Station Safety, 1959
1604
Recommended Practice for Abandonment or Removal of Underground
Tanks, 1st ed. 1960
8
Safe Practices in Bulk-Plant Operations, 1955
1605
Loading and Unloading Speeds for Gasoline Delivery Trucks, 1st ed.
13A
Cleaning Mobile Tanks Used for Transportation of Flammable Liquids-
1961
Section A, Tank Vehicles, 1955
1606
A Study of the Value of Coating the Underside of the Bottoms of
13B
Cleaning Mobile Tanks Used for Transportation of Flammable Liquids-
Vertical Storage Tanks and the Value of Painting the Interior of the Types
Section B, Tank Cars, 1958
of Storage Tanks Generally Used in Marketing Operations, 1st ed.
760
Model Risk Management Plan Guidance for Petroleum Refineries-
1960
Guidance for Complying with EPA’s RMP Rule (40 Code of Federal
1607
A Report on the Use of Plastic Materials for Temporary or Permanent
Regulations 68), 3rd ed. 2001
Repairs to Steel Storage Tanks, 1st ed. 1960
761
Model Risk Management Plan Guidance for Exploration and Production
1608
Driver Selection and Training Guide, 1st ed. 1960
Facilities-Guidance for Complying with EPA’s RMP Rule (40 Code of
Federal Regulations 68), 3rd ed. 2001
1609
Driver’s Handbook, 1st ed. 1960
2002
Fire Protection in Natural-Gasoline Plants, 1st ed. 1954, 2nd ed.
1610
Recommended Standard for the Base Lay-Out of Single and Single
1956
Product Twin Service Station Pumps or Remote Dispensers, and Two
Product Remote Dispensers, 1st ed. 1965
2002
API Inspection for Accident Prevention in Refineries, 1st ed. 1984
1611
Service Station Tankage Guide, 1st ed. 1961
2004
Inspection for Fire Protection, 1st 1984
1613
Bulk Plant Design Guide, 1st ed. 1961
2005
API Accident Prevention Manual on Operation of Service Stations,
1st ed. 1933-8th ed. 1996
1614
Drivers’ Paper Work, 1st ed. 1961
Service Station Safety, 5th ed. 1984
1616
Petroleum Delivery Truck Operation and Maintenance, 1st ed. 1961
2007
Safe Maintenance Practices in Refineries, 1st ed. 1962, 2nd ed. 1983
1617
Information on Marketing Delivery of Light Refined and Packaged
Petroleum Products, 1st ed. 1966
2008
Safe Operation of Inland Bulk Plants, 3rd ed. 1976, 4th ed. 1984
1618
Structural Characteristics of Hose and Fittings, 1st ed. 1962
2010
Safe Practices in Drilling Operations, 3rd ed. 1967
1619
Guide for Selection of Petroleum Tank Trucks for Distributors and
2011
Safe Practices in Air or Gas Drilling, 1st ed. 1964
Jobbers, 1st ed. 1963
2013
Cleaning Mobile Tanks in Flammable or Combustible Liquid Service,
1620
Bulk Design and Operating Practices to Protect Product Quality of
4th ed. 1967-6th ed. 1991
Gasoline and Distillate Fuels, 1st ed. 1963
2015
Safe Entry and Cleaning of Petroleum Storage Tanks, 4th ed. 1991
1621
Bulletin on Recommended Good Practices for Bulk Liquid-Loss Control
2015A Guide for Controlling the Lead Hazard Associated with Tank Entry and
in Service Stations, 1st ed. 1951-4th ed. 1987
Cleaning, 1st 1975-2nd 1982
1622
Barge Terminal Design and Operating Practices to Protect Product
2015B Cleaning Open-Top and Covered Floating-Roof Tanks, 1st ed. 1981
Quality of Gasoline and Distillate Fuels, 1st ed. 1963
2016
Cleaning Tanks Used for Gasoline, 4th ed. 1961
1623
Recommended Good Practices for Bulks Liquid-Loss Control in
2016
Guidelines and Procedures for Entering and Cleaning Petroleum
Terminals and Depots, 1st ed. 1963
Storage Tanks, 1st ed. 2001
1624
What to Do When the Power Goes Off, 1st ed. 1967
2017
First-Aid and Safety-Training Guide, 1st ed. 1951-8th ed. 1985
1625
Analysis of Temperature Effects on Gasoline Marketing Operations,
2019
API Instructors First Aid Guide for Class Training, 1st ed.
1934,
1st ed. 1979
Administrative Guide for American Petroleum Institute Course in First
1626
Storing and Handling Ethanol and Gasoline-Ethanol Blends at
Aid Training, 6th ed. 1985
Distribution Terminals and Service Stations, 1st ed. 1985
2020
Driver Improvement Course, 1st ed. 1970
1627
Storage and Handling of Gasoline-Methanol/Cosolvent Blends at
2021A
Interim Study-Prevention and Suppression of Fires in Large
Distribution Terminals and Service Stations, 1st ed. 1986
Aboveground Atmospheric Storage Tanks, 1st ed. 1998
1630
Waste Water Handling and Treatment Manual for Petroleum Marketing
2022
Fire Hazards of Oil Spills on Waterways, 1st ed. 1977, 2nd ed. 1982
Facilities, 1st ed. 1979
2023
Guide for Safe Storage and Handling of Heated Petroleum Derived
1632
Cathodic Protection of Underground Petroleum Storage Tanks and
Asphalt Products and Crude Oil Residua , 1st ed. 1977, 2nd ed.
Piping Systems, 1st ed. 1983, 2nd ed. 1987, 3rd ed. 1996
1988, 3rd ed. 2001
1633
Handling Water Discharges from Automotive Service Facilities Located
2024
Safe Practices in Geophysical Exploration Operations, 1st ed. 1961
at Petroleum Marketing Operations, 1st ed. 1992
2025
Emergency Planning and Mutual Aid for Products Terminals and Bulk
1634
The Used Oil State Law Digest, 2nd ed. 1994
Plants, 1st ed. 1978
1635
Recommended Practice for Underground Petroleum Product Storage
2031
Combustible-Gas Detector Systems and Environmental/Operational
Systems at Marketing and Distribution Facilities, 1st ed. 1984-3rd ed.
Factors Influencing their Performance, 1st ed. 1991
1987
187
Historical Publications
To purchase individual API standards, visit apiwebstore.org
2202
Guidelines for Protecting Against Lead Hazard when Dismantling and
2522
Comparative Methods for Evaluating Conservation Mechanisms for
Disposing of Steel from Tanks that Have Contained Leaded Gasoline,
Evaporation Loss, 1967
1st ed. 1975-3rd 1991
2523
Petrochemical Evaporation Loss from Storage Tank, 1st ed. 1969
2203
Fire Precautions for Fuelling Fixed, Portable, and Self-Propelled
2529
Recommended Practice for Measuring, Sampling, and Testing Natural
Engine-Driven Equipment, 1st ed. 1974-3rd ed. 1987
Gas Fluids, 1st ed. 1968, 2nd ed. 1972
2204
Fracturing Oil or Gas Wells with Flammable Fluids, 1st ed. 1964
2530
Orifice Metering of Natural Gas, 1st ed. 1955, 2nd ed. 1978
2205
Guide for the safe Storage and Loading of Heavy Oil and Asphalt,
2531
Mechanical Displacement Meter Provers, 1st ed. 1960, 2nd ed. 1963
1st ed. 1966-2nd ed. 1969
2533
Recommended Practice for Metering Viscous Hydrocarbons, 1st ed.
2206
Identification of Compressed Gases in Cylinders, 1st ed. 1970
1969
2209
Pipe Plugging Practices, 1st ed. 1978
2534
Measurement of Liquid Hydrocarbons by Turbine Meter Systems,
2211
Precautions While Working in Reactors Having an Inert Atmosphere,
1st ed. 1970
1st ed. 1971
2540
Petroleum Measurement Tables (Historical edition 1952), Superseded
2212
Ignition Risks of Ordinary Flashlights, 1st ed. 1972, 2nd ed. 1983
by MPMS Chapter 11.1
2213
Ignition Risks of Ordinary Telephones, 1st ed. 1974
2541
Standard Tables for Positive Displacement Meter Prover Tanks, 1966
2214
Spark Ignition Properties of Hard Tools, 1st ed. 1980-4th ed. 2004
2542
Methods of Test for Water and Sediment in Crude Oils, 1968
2215
Crude Oil as a Burner Fuel, 1st ed. 1974, 2nd ed. 1982
2543
Method of Measuring the Temperature of Petroleum and Petroleum
Products, 1965
2216
Ignition Risk of Hydrocarbon Vapors by Hot Surfaces in the Open Air,
1st ed. 1980, 2nd ed. 1991, 3rd ed. 2003
2544
Method of Test for API Gravity of Crude Petroleum and Petroleum
Products, 1967
2217
Guidelines for Confined Space Work in the Petroleum Industry, 1st ed.
1984
2545
Method of Gauging Petroleum and Petroleum Products, 1st ed. 1965
2220
Contractor Safety Performance Process, 1st ed. 1991, 2nd ed. 2005,
2546
Method of Sampling Petroleum and Petroleum Products, 1965
3rd ed. 2011
2547
Density, Specific Gravity, or API Gravity of Crude Petroleum and Liquid
2221
Contractor and Owner Safety Program Implementation, 1st ed. 1996,
Petroleum Products, 1967
2nd ed. 2004, 3rd ed. 2011
2548
Method of Test for Water and Sediment in Crude Oils and Fuel Oils by
2300
Evaluation of Fire Fighting Foams as Fire Protection for Alcohol
Centrifuge, 1968
Containing Fuels, 1st ed. 1985
2550
Measurement and Calibration of Upright Cylindrical Tanks, 1966
Measurement
2551
Measurement and Calibration of Horizontal Tanks, 1966
2553
Measurement and Calibration of Barges, 1966
2500
Measuring, Sampling, and Testing Crude Oil, 1st ed. 1955, 2nd ed.
1961
2560
Standard Method of Test for Water in Petroleum and Other Bituminous
Materials, 1968
2501
Crude-Oil Tank Measurement and Calibration, 1st ed. 1955, 2nd ed.
1961
2560
Reconciliation of Liquid Pipeline Quantities, 1st ed. 2003
2502
API Recommended Practice for Lease Automatic Custody Transfer,
2561
Standard Method of Test for Sediment in Crude and Fuel Oils by
1st ed. 1961
Extraction, 1st ed. 1966
2502
STD Lease Automatic Custody Transfer, 1st ed. 1967
2563
Metric Practice Guide, 1st ed. 1970, 2nd ed. 1972
2508
Design and Construction of Ethane and Ethylene Installations at
2564
Conversion of Operational and Process Measurement Unit to the Metric
Marine and Pipeline Terminals, Natural Gas Processing Plants,
System, 1st ed. 1974
Refineries, Petrochemicals Plants, and Tank Farms, 1st ed. 1979
2564.2
Suggested Format Guidelines for the Conversion of API Documents to
2509A Bulletin on Lease Automatic Custody Transfer, 1956
the Metric System, 1974
2509B Shop Testing of Automatic Liquid-Level Gauges, 1961
2567
Evaporative Loss from Storage Tank Floating Roof Landings, 1st ed.
2005
2509C Volumetric Shrinkage Resulting from Blending Volatile Hydrocarbons
with Crude Oils, 2nd ed. 1967, Reaffirmed 1992
Draft Standard Vortex Shedding Flowmeter for Measurement of Hydrocarbon
Fluids, 1st ed. 2007
2511
Bulletin on Precautionary Labels, 1st ed. 1958-3rd ed. 1969
2512
Tentative Methods of Measuring Evaporation Loss from Petroleum
API Manual of Petroleum Measurement Standards
Tanks and Transportation Equipment, 1957
API/GPA Orifice Meter Data Project, Archival Data Tapes, 1st ed.
2513
Evaporation Loss in the Petroleum Industry-Causes and Control, 1959
Ch. 1
Vocabulary, 1977
2514
Bulletin on Evaporation Loss from Tank Cars, Tank Trucks, and Marine
Ch. 3
Tank Gauging, Section 1A, Manual Gauging of Petroleum and
Vessels, 1959
Petroleum Products, 1st ed. 1994
2515
Bulletin on Use of Plastic Foam to Reduce Evaporation Loss, 1961
Ch. 4 Proving Systems, 1978
2516
Evaporation Loss from Low-Pressure Tanks, 1962
Ch. 4 Proving Systems, Section 1, Introduction, 2nd ed. 1998
2517
API Bulletin on Evaporation Loss from Floating-Roof Tanks, 1st ed.
Ch. 4 Proving Systems, Section 2, Pipe Provers 2nd 2001
1962, 2nd ed. 1980, 3rd ed. 1989
Ch. 4 Proving Systems, Section 3, Small Volume Provers, 1st ed. 1988
2518
Evaporation Loss from Fixed-Roof Tanks, 1962
Ch. 4 Proving Systems, Section 5, Master-Meter Provers, 2nd ed. 2000
2519
Bulletin on Use of Internal Floating Covers for Fixed-Roof Tanks to
Reduce Evaporation Loss, 1962, 1976
Ch. 4 Proving Systems, Section 7, Field-Standard Test Measures, 2nd ed.
1998
2520
Bulletin on Use of Variable-Vapor-Space Systems to Reduce
Evaporation Loss, 1964
Ch. 5 Metering, Section 1, Foreword, General Considerations and Scope,
1st ed. 1976-3rd ed. 1995
2521
Use of Pressure-Vacuum Vent Valves for Atmospheric Pressure Tanks to
Reduce Evaporation Loss, 1966
Ch. 5 Metering, Section 2, Measurement of Petroleum Liquid Hydrocarbons
by Positive Displacement Meter, 1st ed. 1977, 2nd ed. 1987
188
Historical Publications
To purchase individual API standards, visit apiwebstore.org
Ch. 5
Metering, Section 3, Measurement of Liquid Hydrocarbons by Turbine
Ch. 10 Sediment and Water, Section 8, Standard Test Method for Sediment in
Meters, 1st ed. 1976-4th ed. 2000
Crude Oil by Membrane Filtration, 1st ed. 1991
Ch. 5
Metering, Section 4, Accessory Equipment for Liquid Meters, 1st ed.
Ch. 10 Sediment and Water, Section 9, Standard Test Method for Water in
1976-3rd ed. 1995
Crude Oils by Coulometric Karl Fischer Titration, 1st ed. 1993
Ch. 5
Metering, Section 5, Fidelity and Security of Flow Measurement
Ch. 11 Physical Properties Data, Section 2, Part 2, Compressibility Factors for
Pulsed-data Transmission Systems, 1st ed. 1982
Hydrocarbons: 0.500-0.611 Relative Density Range and 20-128 F,
1st ed. 1984
Ch. 5
Metering, Section 7, Testing Protocol for Differential Pressure Flow
Measurement Devices, 1st ed. 2003
Ch. 11
Physical Properties Data, Section, Section 2, Part 3, Water Calibration
of Volumetric Provers, 1st ed. 1984
Ch. 5
Metering, Section 8, Measurement of Liquid Hydrocarbons by
Ultrasonic Flowmeters Using Transit Time Technology, 1st ed. 2005
Ch. 11
Physical Properties Data, Section, Section 2, Part 3M, Water
Calibration of Volumetric Provers, 1st ed. 1984
Ch. 6
Metering Assemblies, Section 2, Loading Rack and Tank Truck Metering
Systems, 1st ed. 1983, 2nd ed. 1994
Ch. 12
Calculation of Petroleum Quantities, Section 1, Calculation of Static
Petroleum Quantities, Part 1, Upright Cylindrical Tanks and Marine
Ch. 6
Metering Assemblies, Section 3, Service Station Dispensing Metering
Systems, 1st ed. 1983, 2nd ed. 1994
Vessels, 1st ed. 1996, 2nd ed. 2001
Ch. 12
Calculation of Petroleum Quantities, Section 2, Calculation of Liquid
Ch. 6
Metering Assemblies, Section 4, Metering Systems for Aviation Fueling
Petroleum Quantities Measured by Turbine or Displacement Meters,
Facilities, 1st ed. 1984, 2nd ed. 2007
1st ed. 1981
Ch. 6
Metering Assemblies, Section 5, Metering Systems for Loading and
Ch. 12
Calculation of Petroleum Quantities, Section 2, Calculation of
Unloading Marine Bulk Carriers, 1st ed. 1980
Petroleum Quantities Using Dynamic Measurement Methods and
Ch. 6
Metering Assemblies, Section 6, Pipeline Metering Systems, 1st ed.
Volumetric Corrections Factors, Part 2, Measurement Tickets, 2nd ed.
1981
1995
Ch. 6
Metering Assemblies, Section 7, Metering Viscous Hydrocarbons,
Ch.13
Statistical Aspects of Measuring and Sampling, Section 1, Statistical
1st ed. 1981
Concepts and Procedures in Measurement, 1st ed. 1985
Ch. 7
Temperature Determination, 1st ed. 2001
Ch. 14
Natural Gas Fluids Measurement, Section 1, Measuring, Sampling,
Ch. 7
Temperature Determination, Section 1, Static Temperature Determination
Testing, and Base Conditions for Natural Gas Fluids, 3rd ed. 1975-
Using Mercury-in-Glass Tank Thermometers, 1st ed. 1991
5th ed. 2001
Ch. 7
Temperature Determination, Section
2, Dynamic Temperature
Ch.14
Natural Gas Fluids Measurement, Section 2, Compressibility Factors of
Determination, 1st ed. 1985, 2nd ed. 1995
Natural Gas and Other Related Hydrocarbon Gases, 2nd ed. 1994
Ch. 7
Temperature Determination, Section
3, Static Temperature
Ch. 14
Natural Gas Fluids Measurement, Section 3, Orifice Metering of Natural
Determination Using Portable Electronic Thermometers, 1st ed. 1985
Gas and Other Related Hydrocarbon Fluids (formerly API 2530), 2nd
ed. 1985, 3rd ed. 1990
Ch. 7
Temperature Determination, Section 4, Static Temperature Determination
Using Fixed Automatic Tank Thermometers, 1st ed. 1993
Ch. 14
Natural Gas Fluids Measurement, Section 5, Calculation of Gross
Heating Value, Specific Gravity, and Compressibility of Natural Gas
Ch. 8
Sampling, Section 1, Manual Sampling of Petroleum and Petroleum
Mixtures from Compositional Analysis, 2nd ed. 1981
Products, 1st ed. 1981
Ch. 14
Natural Gas Fluids Measurement, Section 6, Installing and Proving
Ch. 8
Sampling, Section 2, Automatic Sampling of Petroleum and Petroleum
Density Meters, 1st ed. 1979, 2nd ed. 1991
Products, 1st ed. 1983
Ch. 14
Natural Gas Fluids Measurement, Section 7, Mass Measurement of
Ch. 8
Sampling, Section 4, Manual Sampling and Handling of Fuels for
Natural Gas Liquids, 2nd ed. 1995, 3rd ed. 2009
Volatility Measurement, 1st ed. 1995
Ch. 14
Natural Gas Fluids Measurement, Section 8, Liquefied Petroleum Gas
Ch. 9
Density Determination, Section 1, Hydrometer Test Method for Density,
Measurement, 1st ed. 1983, 2nd ed. 1997
Relative Density (Specific Gravity), or API Gravity of Crude Petroleum
and Liquid Petroleum Products, 1st ed. 1981
Ch. 15
Metrication, Section 2, Conversion of Operational and Process
Measurement Units to the Metric (SI) System, 1st ed. 1974
Ch. 9
Density Determination, Section 2, Pressure Hydrometer Test Method
for Density or Relative Density, 1st ed. 1982
Ch. 15
Metrication, Section 2A, Use of Metric Units on Petroleum Packages
During Conversion, 1st ed. 1976
Ch. 10
Sediment and Water, Section 1, Determination of Sediment in Crude
Oils and Fuel Oils by the Extraction Method, 1st ed. 1981, 2nd ed.
Ch. 17
Marine Measurement, Section 1, Guidelines for Marine Cargo
2002
Inspection, 1st ed. 1982-4th ed. 2001
Ch. 10
Sediment and Water, Section 2, Determination of Water in Crude Oil by
Ch. 17
Marine Measurement, Section 5, Guidelines for Cargo Analysis and
Distillation, 1st ed. 1981
Reconciliation, 2nd ed. 2003
Ch. 10
Sediment and Water, Section 3, Determination of Water and Sediment
Ch. 17
Marine Measurement, Section
7, Recommended Practices for
in Crude Oil by the Centrifuge Method (Laboratory Procedure), 1st ed.
Developing Barge Control Factors (Volume Ratio), 1st ed. 1995
1981, 2nd ed. 2003
Ch. 17
Marine Measurement, Section 9, Vessel Experience Factor (VEF),
Ch. 10
Sediment and Water, Section 4, Standard Methods of Test for Water
1st ed. 2005
and Sediment in Crude Oils, 1970
Ch. 19
Evaporative Loss Measurement, Section 1 Evaporative Loss from Fixed
Ch. 10
Sediment and Water, Section 5, Determination of Water in Petroleum
Roof Tanks, 2nd ed. 1991, 3rd ed. 2002
Products and Bituminous Materials by Distillation, 1st ed. 1983-
Ch. 19
Evaporative Loss Measurement, Section 1A, Evaporation Loss from
3rd ed. 2002
Low-Pressure Tanks (previously Bulletin 2516) 1st ed. 1962
Ch. 10
Sediment and Water, Section 6, Determination of Water and Sediment
Ch. 19
Evaporative Loss Measurement, Section 2, Evaporative Loss from
in Fuel Oils by the Centrifuge Method (Laboratory Procedures), 1st ed.
Floating Roof Tanks, 1st ed. 1997, 2nd ed. 2003
1983-3rd ed. 2002
Ch. 19
Evaporative Loss Measurement, Section 3, Part F, Evaporative Loss
Ch. 10
Sediment and Water, Section 7, Standard Test Method for Water in
Factor for Storage Tanks Certification Program, 1st ed. 1997
Crude Oil by Karl Fischer Titration (Potentiometric), 1st ed. 1991,
Ch. 19
Evaporative Loss Measurement, Section 3, Part G, Certified Loss Factor
2nd ed. 2002
Testing Laboratory Registration, 1st ed. 1997
189
Historical Publications
To purchase individual API standards, visit apiwebstore.org
Ch. 19 Evaporative Loss Measurement, Section 4, Recommended Practice for
4399
Methods of Storage, Transportation, and Handling of Drilling Fluid
Speciation of Evaporative Losses, 1st ed. 1997, 2nd ed. 2005
Samples, 1985
4401
Applicability of a Single Species Bioassay for Estimating the Effects of
Health, Environment, and Safety
Refinery Effluent on an Estuarine Environment, 1985
A Critical Review of Recent Literature on Toxicity of Cyanides to Fish, Peter
4405
Field Evaluation of Well Flushing Procedures, 1985
Doudoroff, 1980
4407
Rehabilitating Oiled Seabirds: A Field Manual, 1985
API Guiding Environmental Principles and Management Practices, Synopsis of
4410
Subsurface Venting of Hydrocarbon Vapors from an Underground
API Recommended Practice 9000, December 1993
Aquifer, 1985
Collecting and Recycling Used Motor Oil, June 1995
4411
Effect of Prudhoe Bay Crude Oil on the Homing of Coho Salmon in
Compendium of Greenhouse Gas Emissions Estimation Methodologies for the
Marine Waters, 1985
Oil and Gas Industry, Pilot Test Version, 2001
4412
Oil Effects on Spawning Behavior and Reproduction in Pacific Herring
Petroleum Industry Environmental Performance, Sixth Annual Report
(Clupea Harengus Pallasi), 1985
Petroleum Industry Environmental Performance, Fifth Annual Report
4415
Literature Survey: Unassisted Natural Mechanisms to Reduce
Petroleum Industry Environmental Performance, Fourth Annual Report
Concentrations of Soluble Gasoline Components, 1985
Petroleum Industry Environmental Performance, Third Annual Report
4419
Review of Published Odor and Taste Threshold Values of Soluble
Gasoline Components, 1985
Petroleum Industry Environmental Performance, Second Annual Report
4421
Plume Rise Research for Refinery Facilities, 1986
Promoting Partnerships, Cooperation Between the Petroleum Industry and
Environmental, Educational and Community Groups, September 1996
4422
Cost Model for Selected Technologies for Removal of Gasoline
Components in Groundwater, 1986
313
Petroleum Emission Factor Information Retrieval System, 1993
4423
Tracer Study Conducted to Acquire Data for Evaluation of Air Quality
318
Land Treatment Practices in the Petroleum Industry, June 1983
Dispersion Models, 1986
335
Refinery MACT Workshop, 1996
4425
The Role of Chemical Dispersants in Oil Spill Control, 1986
338
Summary of Question and Answer Sessions for the American
4426
Bacterial Growth in and Penetration of Consolidated and
Petroleum Institute’s Gasoline Distribution MACT Workshop, 1997
Unconsolidated Sands Containing Gasoline, 1977
349
Air Toxic Emission Factors for Combustion Sources Using Petroleum
4427
Beneficial Stimulation of Bacterial Activity in Groundwater Containing
Based Fuels: Graphical-user-interface Database and User’s Manual,
Petroleum Products, 1975
Version 2.0.1, 1998
4428
Enhancing the Microbial Degradation of Underground Gasoline by
4296
Analysis of Refinery Wastewaters for the EPA Priority Pollutants, 1978
Increasing Available Oxygen, 1982
4297
Fate and Effects of Polynuclear Aromatic Hydrocarbons (PNAs) in the
4429
Examination of Venting for Removal of Gasoline Vapors from
Aquatic Environment, 1978
Contaminated Soil, 1980
4311
Nox Emissions from Petroleum Industry Operations, 1979
4430
Field Application of Subsurface Biodegradation of Gasoline in Sand
4317
Underground Movement of Gasoline on Groundwater and Enhanced
Formation, 1978
Recovery by Surfactants, 1979
4431
Forced Venting to Remove Gasoline from a Large-Scale Model Aquifer,
4322
Fugitive Hydrocarbon Emissions from Petroleum Production Operations,
1984
2 volumes, 1980
4434
Review of Groundwater Models, 1982
4346
Refinery Wastewater Priority Pollutant Study--Sample Analysis and
4435
Oil Spill Cleanup: Options for Minimizing Adverse Ecological Impacts,
Evaluation of Data, 1981
1985
4365
Characterization of Particulate Emissions from Refinery Process
4438
Underwater Drilling Measurement of Sound Levels and Their Effects on
Heaters and Boilers, 1983
Belukha Whales, 1986
4367
Groundwater Monitoring and Sample Bias, 1983
4439
Exposure Data on C7 and C8 Aromatics During Handling and
4369
Treatment Technology-Removal of Dissolved Gasoline Components
Production of Motor Gasolines, 1986
from Groundwater, 1983
4440
Tidal Area Dispersant Project: Fate and Effects of Chemically Dispersed
4379
The Land Treatability of Appendix VIII Constituents Present in Petroleum
Oil in the Nearshore Benthic, 1986
Industry Wastes, 1984
4441
Toxicity of Dispersed and Undispersed Prudhoe Bay Crude Oil Fractions
4381
Evaluation of New Versions of the Empirical Kinetic Modeling Approach
to Shrimp, Fish and Their Larvae, 1985
(EKMA). Development of a Statistical Methodology for Control Strategy
4442
Laboratory Evaluation of Seven-Day Fathead Minnow and
Analysis, 1984
Ceriodaphnia Chronic Toxicity Tests, 1986
4382
New Approaches to Quantification of Perception of Scenic Beauty and
4443
Effect of Suspended Solids on Bioavailability of Petroleum Refinery
Visibility, 1984
Effluent Chemicals, 1986
4388
Land Treatment Safe and Efficient Disposal of Petroleum Waste, 1985
4445
Effects of Crude Oil and Chemically Dispersed Oil on Chemoreception
4390
Test Results of Surfactant Enhanced Gasoline Recovery in a Large
and Homing in Pacific Salmon, 1987
Scale Model Aquifer, 1985
4447
Saving Oiled Seabirds, 1986
4391
Biomonitoring-Techniques for Measuring the Biological Effects of Liquid
4448
Field Study of Enhanced Subsurface Biodegradation of Hydrocarbons
Effluents, 1985
Using Hydrogen Peroxide as an Oxygen Source, 1987
4394
Detection of Hydrocarbons in Groundwater by Analysis of Shallow Soil
4450
Developing Criteria for Advance Planning for Dispersant Use, 1987
Gas/Vapor, 1985
4451
Assessing Natural Resource Damages from Hazardous Substances: An
4395
Laboratory Study on Solubilities of Petroleum Hydrocarbons in
Examination of Existing Assessment Approaches, 1987
Groundwater, 1985
4453
Effects of Airgun Energy Releases on the Eggs, Larvae and Adults of the
4396
Protecting Groundwater, 1985
Northern Anchovy, 1987
4397
Chronic Effects of Drilling Fluids Discharged to the Marine Environment,
4455
Land Treatability of Appendix VIII Constituents Present in Petroleum
1985
Refinery Wastes: Laboratory and Modeling Studies, 1987
190
Historical Publications
To purchase individual API standards, visit apiwebstore.org
4456
Literature Survey: Aerosol Formation, and Subsequent Transformation
4499
Evaluation of Analytical Methods for Measuring Appendix IX,
and Dispersion, During Accidental Releases of Chemicals, 1986
Constituents in Groundwater, 1989
4457
API Evaluation of Urban Dispersion Models with the St. Louis RAPS
4500
Landfarm Air Emissions, 1989
Data Base, 1987
4501
Sediment Toxicity Evaluation, 1990
4459
Surface Roughness Effects on Heavier-than-Air Gas Diffusion, 1987
4502
Detailed Analysis of Ozone State Implementation Plans in Seven Areas
4460
Effects of Dispersed and Undispersed Crude Oil on Mangroves,
Selected for Retrospective Evaluation of Reasons for State
Seagrasses and Corals, 1987
Implementation Plan Failure, Volume I: Executive Summary, 1989
4461
Development and Evaluation of the OCD/API Model, 1987
4503
Detailed Analysis of Ozone State Implementation Plans in Seven Areas
4466
Field Studies on the Reproductive Effects of Oil and Emulsion on
Selected for Retrospective Evaluation of Reasons for State
Marine Birds, 1988
Implementation Plan Failure, Volume II: Technical Report, 1991
4504
A Case-Control Study of Kidney Cancer Among Petroleum Refinery
4468
Fathead Minnow 7-Day Test: Round Robin Study, 1988
Workers, 1990
4469
Sorption/Desorption of Soluble Petroleum Constituents by Materials
4506
Dioxin and Furans: A Primer, 1990
Used in Monitoring Wells, 1988
4507
Abandoned Oil and Gas Industry Wells: A Quantitative Assessment of
4471
Treatment System for the Reduction of Aromatic Hydrocarbons and
Their Environmental Implications, 1990
Ethers Concentrations in Groundwater, 1988
4508
Petroleum in the Freshwater Environment, 1992
4472
Fate and Effects of Produced Water Discharges in Nearshore Marine
Water, 1989
4509
An Evaluation of Soil Gas and Geophysical Techniques for Detection of
Hydrocarbons, 1991
4473
Bioaccumulation of Polycyclic Aromatic Hydrocarbons and Metals in
Estuarine Organisms, 1989
4510
Technological Limits of Groundwater Remediation: A Statistical
Evaluation Method, 1991
4474
Phase Separated Hydrocarbon Contaminant Modeling for Corrective
Action, 1988
4511
Vehicle Emissions Inspection and Maintenance (I/M) Program
Improvement Strategies, 1990
4475
Rehabilitation of Groundwater: Removal of Soluble Petroleum
Constituents through Soil Application, 1989
4513
Review of Natural Resource Damage Assessments in Freshwater
Environments Task 1: Review of Case Histories, 1992
4476
Hydrogeologic Data Base for Groundwater Modeling, 1989
4514
Review of Natural Resource Damage Assessments in Freshwater
4477
Acute Exposure to Methanol in Fuels: A Prediction of Ingestion
Environments Task 2: Effects of Oil Releases into Freshwater Habitats,
Incidence and Toxicity, 1988
1992
4478
Rapid Test for Dispersant Effectiveness Oil Spill Sites, 1989
4515
Use of Reactivity Factors to Predict Ozone Impacts of Methanol Fuel,
4480
Fate and Effects of Drilling Fluid and Cutting Discharges in Shallow,
1990
Nearshore Waters, 1989
4516
Sampling and Analysis of Gasoline Range Organics in Soil, 1991
4482
Species Tolerance for NPDES Bioassays: Volume II, 1989
4517
Produced Water Impacts on Louisiana Wetlands, 1991
4483
Species Tolerance for NPDES bioassays: Volume I, Freshwater
4518
Measurement of BTEX Emission Fluxes from Refinery Wastewater
Organisms, 1989
Impoundments Using Atmospheric Tracer Techniques, 1991
4484
Monitoring Near Refineries for Airborne Chemicals on the SARA Title
4519
API Exposure Classification Scheme for Collection of Industrial Hygiene
LLL Section 313 List Volume I: Validated Ambient Air Concentrations
Monitoring Data, 1990
Around Three Refineries, 1989
4520
Evaluation of a Draft Method for Ignitability of Solid Waste, 1991
4485
Effects of Offshore Petroleum Operations on Cold Water Marine
Mammals: A Literature Review, 1989
4521
Evaluation of the Apparent Effects Threshold (AET) as a Basis for
Setting Sediment Quality Criteria, 1991
4486
Evaluating of the US EPA Proposed Ozone Precursor Point Source
Screening Technique-Report on Task 2 of the Evaluation Plan, 1989
4522
Results of Hazard Response Model Evaluation Using Desert Tortoise
(NH3) and Goldfish (HF) Data Bases, Volume I: Summary Report,
4488
Preliminary Evaluation of the USA EPA Proposed Ozone Precursor Point
1990
Source Screening Technique--Report Task 1 of the Comprehensive
Evaluation Plan, 1989
4523
Results of Hazard Response Model Evaluation Using Desert Tortoise
(NH3) and Goldfish (HF) Data Bases, Volume II: Appendices, 1990
4481
Rapid Bioassay Procedure for Drilling Fluids, 1989
4524
Clinical Toxicology of the Acute Ingestion of Methanol/Hydrocarbon
4489
Assessment of the Adaptability of the API Onboard Refueling Vapor
Blends: A State-of-the-Art Review, 1991
Recovery System to the Current Vehicle Population, 1989
4526
Atmospheric Chemistry of Sulfate Esters, 1991
4490
Measuring Natural Resource Damages: An Economic Appraisal, 1989
4528
Petroleum Release Decision Framework (PRFD); User’s Manual (and
4491
Effect of Homogeneous and Heterogeneous Surface Roughness on
IBM-Compatible Software), 1990
Heavier-than-Air Gas Dispersion, Volume I, 1989
4532
Produced Water Radionuclide Hazard/Risk Assessment, Phase I, 1991
4492
Effect of Homogeneous and Heterogeneous Surface Roughness on
HTAG Dispersion, Volume II, 1989
4533
The Effects of Fuel RVP and Fuel Blends on Emissions at Non-FTP
Temperatures, Volume I, 1994
4494
Monitoring Near Refineries for Airborne Chemicals on the SARA Title III
Section 313 Volume II: A Generic Study Design Protocol, 1989
4534
The Effects of Fuel RVP and Fuel Blends on Emissions at Non-FTP
Temperatures, Volume II, 1991
4495
Monitoring Near Refineries for Airborne Chemicals on the SARA Title III
Section 313 List Volume III: Literature Survey, 1988
4536
Methanol Health Effects Epidemiology Literature Review and Search for
Study Population, 1991
4496
Monitoring Near Refineries for Airborne Chemicals on the SARA Title III
Section 313 List Volume IV: Sampling and Analytical Protocols for
4538
Remote Sensing of Automobile Exhaust, 1991
Selected SARA Title III Chemicals in Airborne Emissions, 1988
4539
Evaluation of Area and Volume Source Dispersion Models for
4497
Cost-Effective, Alternative Treatment Technologies for Reducing the
Petroleum and Chemical Industry Facilities, Phase I, Final Report,
Concentrations of Ethers and Alcohols in Groundwater, 1991
1992
4498
A Survey and Analysis of Liquid Gasoline Released to the Environment
4540
Area and Volume Source Air Quality Model Performance Evaluation,
During Vehicle Refueling at Service Stations, 1998
Phase II, Final Report, 1992
191
Historical Publications
To purchase individual API standards, visit apiwebstore.org
4541
Area and Volume Source Dispersion Models for Petroleum and
4595
Criteria for pH in Onshore Solid Waste Management in Exploration and
Chemical Industry Facilities, Phase III, 1994
Production Operations, 1995
4542
Temperature, Reid Vapor Pressure and Gasohol Effects on Running
4596
Studies to Determine the Ecological Effects of Cleanup Methods for
Losses, 1992
Oiled Shorelines, 1994
4543
User’s Manual for Regress: Statistical Evaluation of Asymptotic Limits of
4597
Analytical Method Performance for RCRA Programs, 1995
Groundwater Remediation, 1992
4598
Gasoline: Insights into the Etiology of the Development of
4545
Hazard Response Modeling Uncertainty (A Quantitative Method):
Hepatocellular Carcinoma in the Female Mouse, 1994
User’s Guide for Software for Evaluating Hazardous Gas Dispersion
4603
Investigation of MOBILE5a Emission Factors: Assessment of Exhaust
Models, Volume I, 1992
and Nonexhaust Emission Factor Methodologies and Oxygenate
4547
Hazard Response Modeling Uncertainty (A Quantitative Method):
Effects, 1994
Components of Uncertainty in Hazardous Gas Dispersion Models,
4604
Investigation of MOBILE5a Emission Factors: Evaluation of I/M and LEV
Volume 3, 1992
Program Benefits, 1994
4548
Screening of Soils for Leachable Benzene: Prediction of Toxicity
4606
Source Control and Treatment of Contaminants Found in Petroleum
Characteristic Leaching Procedure (TCLP) Benzene from Total Benzene
Product Terminal Tank Bottoms, 1994
Analysis, Mini-TCLP and Headspace Analysis, 1992
4630
Electronic Exchange of Environmental Compliance Information: A
4549
A Field Study of Sediment Quality Near a Refinery Outfall, 1994
Proposed Approach, 1995
4550
Uncertainties in Current Models of Global Warming, 1992
4645 Methane and Carbon Dioxide Emission Estimates from U.S. Petroleum
4551
Treatment of Gasoline-Contaminated Groundwater Through Surface
Sources, 1997
Application: Laboratory Experiments, 1994
4682
Free-Product Recovery of Petroleum Hydrocarbon Liquids, 1999
4553
Gasoline Vapor Exposure Assessment at Service Stations, 1993
4729
Models for Design of Free-Product Recovery Systems for Petroleum
4554
A Study of the Relationship Between Folate Status and Methanol
Hydrocarbon Liquids. 2003
Toxicity, 1993
9000
Management Practices, Self-Assessment Process, and Resource
4555
A Mortality Study of Marketing and Marine Distribution Workers with
Materials, 2nd ed. 1998
Potential Exposure to Gasoline, 1992
HF1
Hydraulic Fracturing Operations-Well Construction and Integrity
45551
A Nested Case-Control Study of Kidney Cancer, Leukemia and Multiple
Guidelines, 2009
Myeloma in a Cohort of Land-Based Terminal Workers Exposed to
HF2
Water Management Associated with Hydraulic Fracturing, 2010
Gasoline in the Petroleum Industry, 1994
HF3
Practices for Mitigating Surface Impacts Associated with Hydraulic
45552
An Exposure Assessment for Marketing and Marine Distribution
Fracturing, 2011
Workers in the Petroleum Industry with Potential Exposure to Gasoline,
1994
Policy and Economic Studies
4556
Scientific Assessment of the Urban Airshed Model (UAM--IV), 1993
An Economic Analysis of the Distributor-Dealer Wholesale Gasoline Price
4557
Effects of Specific Fuel Aromatic Compounds on Motor Vehicle Exhaust
Inversion of 1990, 1991
Emissions, Volume I: Procedures and Data Report; Vol. II: Statistical
Competition is Alive and Well in Gasoline Marketing, 1992
Analysis & Interpretation, 1994
Domestic Petroleum Production and National Security, 1986
45561
Scientific Assessment of the Urban Airshed Model (UAM-IV): An
Economic Costs of Technology-Forcing Mandates, 1996
Overview, 1993
Encouraging Innovation: R&D in the Petroleum Industry, 1995
4560
A 90-Day Feeding Study in the Rat with Six Different Mineral Oils, Three
Different Mineral Waxes, and Coconut Oil. BIBRA Project Number
Financial Trends of Leading U.S. Oil Companies 1968-1991, 1992
31010, 1992
Market Shares and Individual Company Data for U.S. Energy Markets, 1950-
4561
Pump and Treat: The Petroleum Industry Perspective, 1992
1991, 1992
4563
Assessment of Planned Northeast Ozone Transport Region Modeling
Regulation and Jobs-Sorting Out the Consequences, 1992
Activities, 1993
The Economic Impact of ANWR Development, 1990
4566
Evaluation of the Technology Alternatives for Controlling Fugitive
The Sense and Nonsense of Energy Conservation
Emissions from Sludge Dewatering Operations, 1992
9
Acute Toxicity of Drilling Muds Containing Hydrocarbon Additives and
4567
Oil Spill Response in the Freshwater Environment, 1993
Their Fate and Partitioning Among Liquid, Suspended and Solid
4568
Preliminary Scope for a Gulf Coast Ozone Study, 1993
Phases, 1985
4569
Subsurface Fate and Transport of a Methanol/Gasoline Blend (M85):
013
Superfund Liability and Taxes: Petroleum Industry Shares in Their
A Laboratory Investigation, 1994
Historical Context, 1997
4571
A Fundamental Evaluation of CHEMDAT7 Air Emissions Model, 1993
014
Regular, Mid-grade or Premium: Which Should I Buy?, 1996
4572
In-Use Vehicle Exhaust Emissions Study: Controlled Testing, 1994
16
Analysis of Foods for Benzene, 1992
4573
Comparison of HC and CO Emission Estimates Using FTP, IM240 and
016
Heating Oil in the United States, 2002
Remote Sensing: Statistical Analysis, 1994
17
How Much We Pay for Gasoline-The Cost of Motor Gasoline to
4574
On-Road Carbon Monoxide and Hydrocarbon Remote Sensing in the
Consumers-1998 Annual Review and 1999 January-August, 1999
Chicago Area in 1992, 1994
21
API Mineral Oil Review, 1992
4581
Evaluation of Technologies for the Treatment of Petroleum Product
022
Energy, Conservation, and Economic Growth, 1981
Marketing Terminal Wastewater, 1993
022
The Origin and Evolution of Gasoline Marketing, 1981
4582
Comparative Evaluation of Biological Treatment of Petroleum Product
023
Oil Industry Participation in Emergency Planning, 1981
Terminal Wastewater by the Sequencing Batch Reactor Process and
the Rotating Biological Contactor Process, 1993
26
Assessment Guide for Refinery Wastewater Impoundment Impacts of
Groundwater, 1980
4591
Odor Taste Threshold Studies Performed with Tertiary Amyl Methyl Ether
(TAME), 1993
026
Economic Theory and Evidence on Cross-Subsidization of Retail
Gasoline Operations, 1983
192
Historical Publications
To purchase individual API standards, visit apiwebstore.org
027
Mineral Access Status of the Federal Lands, 1983
055
Gasoline Distribution and Service Station Margins: An Assessment of
EPA Assumptions and Implications for Methanol, 1990
028
Oil Exploration in Less Developed Countries: The Activities of Private Oil
Companies, 1983
056
Federal Policy Regarding the Take-or-Pay Obligations of Interstate Gas
Pipelines, 1988
030
The Consumer Impacts of Mandatory Markup Laws and Related
Restrictions, 1984
057
Managing the Environment: A Review of Present Programs and Their
Goals and Methods, 1989
031
A Legislative History and Analysis of the Black Lung Program, 1984
057
Non-Hazardous Solid Waste Landfill Policy, 1991
031
Survey of Oil and Gas Activities on Federal Wildlife Refuges and
Waterfowl Production Areas, 1983
058
The Decline of Gasoline Service Stations and Motorists’ Access to Car
Maintenance Services, 1989
032
An Empirical Analysis of the Determinants of Petroleum Drilling, 1983
058
Meeting the Oxygenate Requirements of the 1990 Clean Air Act
033
Compatibility of Oil and Gas Operations on Federal Onshore Lands with
Amendments, 1991
Environmental and Rural Community Values, 1984
059
The Cost of Alcohol Fuel Mandates: Transportation, Marketing,
033
Production and Revenue Impacts of OCS Moratoria, 1984
Distribution, Fire and Safety, and Measurement, 1989
034
The Efficiency Loss and Income Distribution Effects of Crude Oil and
059
Structure and Performance in Motor Gasoline Manufacturing and
Natural Gas Price Controls, 1984
Marketing, 1991
035
The Cost of OCS Bid Rejection, 1984
060
Energy and Macroeconomic Performance, 1989
036
Labor Responses to Income-Providing Programs: A Literature Review,
060
Price Adjustment in Gasoline and Heating Oil Markets, 1991
1984
061
Can Energy Conservation Fully Replace Incremental Energy Production
036
Diligence Requirements for Federal Coal, 1985
in a Growing U.S. Economy?, 1990
037
Dual Distribution: Theory and Evidence, 1986
061
Energy Consumption/Gross State Product Ratios in the United States,
038
A Review of Evidence of the Consequences of United States Cargo
1991
Preference Programs, 1985
062
An Historical Overview of Solid Waste Management in the Petroleum
039
The Longshoremen’s and Harbor Workers’ Compensation Act: The
Industry, 1990
1972 and 1984 Amendments, 1985
062
The Impact of State Legislation on the Number of Retail Gasoline
039
Efficiency Issues in Other Continental Shelf Leasing, 1987
Outlets, 1991
040
Value Added Taxes: The Experience of Western European Countries,
063
The Measurement of Regressivity: The Case of the Motor Fuels Tax,
1985
1990
040
Safety of Interstate Liquid Pipelines: An Evaluation of Present Levels
063
Serious Incidents in the U.S. Petroleum Refining Industry: 1985-1989,
and Proposals for Change, 1987
1992
041
The Impact of a Tax on All Oil on the Costs of U.S. Energy Intensive
064
Used Oil Management in Selected Industrialized Countries, 1991
Industries, 1987
065
Economic Evaluation of Wetlands, 1991
042
Mineral Leasing on Federal Lands: A Comparison of Key Leasing
065
Estimated Costs and Benefits of Retrofitting Aboveground Petroleum
Elements, 1985
Industry Storage Tanks with Release Prevention Barriers, 1992
042
Analytics of Proposals to Compel Open Supply, 1987
65
Control Strategies for Reducing Landfarm Air Emissions, 1989
043
Factors Affecting Petroleum Product Imports, 1985
066
World Petroleum Supply: History, Prospects, and Policy Issues, 1991
043
The Effects of State Below-Cost Selling Laws on Retail Prices of Motor
066
Economic Aspects of Workplace Safety Regulation with Application to
Gasoline, 1987
the U.S. Petroleum Industry, 1992
044
Risk and Returns in the Interstate Natural Gas Pipeline, 1988
067
Petroleum Industry Technology to Meet Today’s Challenges, 1991
046
Aggregate Energy Demand: Determinants and Implications for
068
International Comparisons of Energy-Gross National Product Ratios,
Conservation Policy, 1989
1991
047
Compensation for Medical Expenses and Lost Wages of the Chronically
069
Energy Prices and Externalities, 1993
Ill, 1986
068
Do Product Prices Respond Symmetrically to Changes in Crude
047
The Economics of Alternative Fuel Use: Substituting Methanol, 1989
Prices?, 1992
048
Workers Compensation and Disease, 1986
069
The Cleanup of Inactive Hazardous Waste Sites in Selected
048
The Net Social Cost of Mandating Out-of-Service Inspections of
Industrialized Countries, 1991
Aboveground Storage Tanks in the Petroleum Industry, 1989
70
Dealing with Uncertainties in a Biologically Based Risk Assessment of
49
Biological Research on the Effects of Undispersed and Dispersed
Cyclophosphamide-Induced Leukemia, 1994
Experimental Crude Oil slicks in the New York Bight, 1985
070R
Costs to the Petroleum Industry of Major New and Future Federal
049
OECD Countries and the VAT: The Historical Experience, 1990
Government Environmental Requirements, 1993
050
The Costs and Benefits of Federally Mandated Policies to Promote
070
The Differential Impact of Motor Fuel Taxes on States and Regions,
Energy Conservation: The Case of the Automobile Efficiency Standard,
1993
1990
071
Petroleum and Public Policy: The Post-World War II Experience, 1992
052
Analysis of Factors Influencing the Consumption of Premium Motor
071
Petroleum Product Taxation in the OECD Countries: How Much are They,
Gasolines, 1990
Who Pays Them, and What are They Doing to Petroleum Markets?,
053
Competition in the Interstate Natural Gas Pipeline Industry, 1987
1993
054
Public Policy and the Imprecision of Petroleum Resource Estimates,
072
Water Quality Management: Policy and Practice in Selected Countries,
1987
1992
054
Non-OPEC Supply and World Petroleum Markets: Past Forecasts,
072
RCRA Economic Impact Analysis: Refinery Nonhazardous Wastewater
Recent Experience and Future Prospects, 1990
Surface Impoundments, 1993
055
Petroleum Production on the Arctic National Wildlife Refuge Coastal
073
International Management of Wetlands, 1992
Plain and the National Interest, 1987
193
Historical Publications
To purchase individual API standards, visit apiwebstore.org
75
Development of Improved Methods to Measure Effective Doses of
108
The EPACML Model: Analysis of Critical Components and Finite Source
Ozone, 1994
Methodology
075
Effluent Fees: Present Practice and Future Potential, 1993
109
Environmental Fate and Attenuation of Gasoline in the Subsurface,
1988
077
Jobs and Payrolls in the Petroleum Industry: Description and Analysis of
the Declines During 1981-1993, 1995
110
Estimation of Aromatic Hydrocarbon Emissions from Glycol
Dehydration Units Using a Process Simulation Model, 1993
078
Potential Expenditures by The Petroleum Industry for Water Pollution
Control Measures, 1995
111
Estimation of Incremental Benzene Exposure Associated with Seven
Bulk Gasoline Storage Facilities in North Carolina, 1991
078
Estimates of Annual U.S. Road User Payments Versus Annual Road
Expenditures, 1995
140
Global Emissions of Methane from Petroleum Sources, 1992
079
Water Effluent Trading, 1995
149
Identification, Comparison, and Evaluation of Existing Freshwater,
Estuarine, and Marine Rapid Chronic Bioassays, 1985
079
Household Energy Consumption in the United States: Lifestyles and
Conservation Policy, 1995
191
Method Development and Freon-113 Replacement in the Analysis of
Oil and Grease in Petroleum Industry Samples, 1994
080
Efficiency and Equity Effects of Value-added and Other Broad-based
Consumption Taxes: A Review of the Literature, 1995
192
Modeling Oxygen-Transport Limited Biodegradation in Three-
Bemensionally Heterogeneous Aquifers, 1994
080
Subsidies to Alternative Transportation Fuels and Alternative Fuel
Vehicles in Twelve Eastern States and the District of Columbia, 1995
194
Literature Review on the Effects of Oil and Oil Dispersants on Fishes,
1984
081
Initial Cost Impacts of a Carbon Tax on U.S. Manufacturing Industries
and Other Sectors, 1996
195
Naturally Occurring Benzene, Toluene and Xylenes in Soils, 1991
082
The Funding of Roads in New York: Taxes Collected from Road Users
199
Oil Spill Studies: Measurement of Environmental Effects and Recovery,
Versus Expenditure on Roads, 1995
1983
083
The Funding of Roads in New Jersey: Taxes Collected from Road Users
200
Modeling Aerobic Biodegradation of Dissolved Hydrocarbons in
Versus Expenditure on Roads, 1995
Groundwater, 1995
083
Octane Requirements of the Motor Vehicle Fleet and Gasoline Grade
203
Novel Techniques for the Containment of Oil Flowing Water, 1995
Sales, 1996
204
Polynuclear Hydrocarbons in Sediments in the Vicinity of a Refinery
084
U.S. Highway Fuel Demand: Trends and Prospects, 1996
Outfall, 1987
085
Restructuring the Electric Power Industry: Overview and Impact on the
214
Proceedings: Sampling and Analytical Methods for Determining
Petroleum Industry, 1996
Petroleum Hydrocarbons in Groundwater and Soil, 1984
085
The Monetary Benefits of An 8-Hour 0.08 ppm Ozone Standard in
218
A Pilot Study in Los Angeles to Measure Personal Ozone Exposures
Chicago, 1996
During Scripted Activities, 1997
086
Household and Government Budget Impacts of Market-Based
220
Potential BTEX Emissions from the Nations Triethylene Glycol Units in
Greenhouse Gas Emission Reduction Policies, 1997
Oil and Natural Gas Facilities, 1995
087
Competition and Electric Power Generation, 1997
221
Removal of Benzene from Refinery Wastewater, 1991
087
An Examination of Incentives for and Obstacles to Pollution Prevention
224
Review of EPA’s Proposed Flare Plume Rise Procedure, 1988
in the Petroleum Industry, 1997
334
Sediment Criteria Development: A Technical Critique, 1988
088
Restoring Natural Resources: Legal Background and Economic
349
Use of Biological Monitoring and Biomarkers, 1990
Analysis, 1997
364
York River: Brief Review of Its Physical, Chemical and Biological
088
The Funding of Roads in the United States: How the Taxes and Fees
Characteristics, 1987
Collected from Motorists are Spent, 1997
89
Distribution and Behavior of Drilling Fluids and Cuttings Around Gulf of
Communications
Mexico drilling Sites, 1985
All About Petroleum
089
The Benefits of Road Travel and Transport, 1998
Discover the Wonders of Natural Gas
089
Climate Change Policy Commitments: A Reality Check, 1997
Reinventing Energy
090
A Review of the Literature on Health-health Threshold Values, 1998
Running on Oil
090
Impacts of Market-based Greenhouse Gas Emission Reduction Policies
There’s A Lot of Life in a Barrel of Oil
on U.S. Manufacturing Competitiveness, 1998
091
Carbon Sinks and The Kyoto Protocol, 1999
091
International Upstream Activity by U.S. Firms: Trends, Prospects, and
Policy Issues, 1998
092
Modifying Single-Hull Tankers: Costs and Benefits, 1998
093
Implications of the Kyoto Protocol Targets for OECD Countries, 1998
095
The Kyoto Protocol: Implications of Emissions Trading Scenarios, 1999
101
Impacts of Oil Sanctions in World Markets, 1997
103R
Achieving The Kyoto Protocol: An Analysis of Policy Options, 1998
104
Country Impacts of Multilateral Oil Sanctions and the Conduct of U.S.
Foreign Policy, 1998
104
Emissions and Vehicle Performance with Lower RVP Fuels
105
Economic Sanctions Against Oil Producers: Who’s Isolating Whom?,
1998
106
The Feasibility of “No Cost” Efforts To Reduce Carbon Emissions in the
United States, 1999
194
Publications by Number
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
MPMS
Ch. 1 [Historical]
Vocabulary
2nd
1994
H01002
$118.00
53
MPMS
Ch. 1 [Historical]
Vocabulary-Spanish
2nd
1994
H010SP
$118.00
53, 176
MPMS
Ch. 2.2A
Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method
2nd
2019
H022A2
$200.00
53
MPMS
Ch. 2.2B
Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method
1st
1989
H30023
$90.00
53
Ch. 2.2C/ISO
MPMS
Calibration of Upright Cylindrical Tanks Using the Optical-Triangulation Method
1st
2002
H022C1
$90.00
53
7507-3:1993
Ch. 2.2D/ISO
Calibration of Upright Cylindrical Tanks Using the Internal Electro-Optical Distance Ranging
MPMS
1st
2003
H022D1
$90.00
53
7507-4:1995
Method
Ch. 2.2E/ISO
Petroleum and Liquid Petroleum Products-Calibration of Horizontal Cylindrical Tanks-Part 1:
MPMS
1st
2004
HX202E01
$96.00
53
12917-1:2002
Manual Methods
Ch. 2.2F/ISO
Petroleum and Liquid Petroleum Products-Calibration of Horizontal Cylindrical Tanks-Part 2:
MPMS
1st
2004
HH202F01
$83.00
54
12917-2:2002
Internal Electro-Optical Distance-Ranging Method
MPMS
Ch. 2.2G
Calibration of Upright Cylindrical Tanks Using the Total Station Reference Line Method
1st
2014
H202G01
$87.00
54
MPMS
Ch. 2.7
Calibration of Barge Tanks
1st
1991
H30044
$65.00
54
MPMS
Ch. 2.8A
Calibration of Tanks on Ships and Oceangoing Barges
1st
1991
H30049
$97.00
54
Recommended Practice for the Establishment of the Location of the Reference Gauge Point and
MPMS
Ch. 2.8B
1st
1995
H028B1
$105.00
54
the Gauge Height of Tanks on Marine Tank Vessels
MPMS
Ch. 3.1A
Standard Practice for the Manual Gauging of Petroleum and Petroleum Products
3rd
2013
H301A03
$109.00
54
MPMS
Ch. 3.1A
Standard Practice for the Manual Gauging of Petroleum and Petroleum Products-Spanish
3rd
2013
H301A03S
$109.00
55, 176
Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by
MPMS
Ch. 3.1B
4th
2021
H301B4
$175.00
55
Automatic Tank Gauging
MPMS
Ch. 3.2
Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars
1st
1995
H03021
$105.00
55
MPMS
Ch. 3.2
Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars-Spanish
1st
1995
H03021S
$105.00
55, 176
Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized
MPMS
Ch. 3.3
1st
1996
H03031
$90.00
55
Storage Tanks by Automatic Tank Gauging
Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized
MPMS
Ch. 3.3
1st
1996
H030316
$90.00
55, 176
Storage Tanks by Automatic Tank Gauging-Spanish
Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic
MPMS
Ch. 3.4
1st
1995
H03041
$90.00
55
Tank Gauging
Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic
MPMS
Ch. 3.4
1st
1995
H03041SP
$90.00
55, 176
Tank Gauging-Spanish
Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels
MPMS
Ch. 3.5
1st
1997
H03051
$90.00
55
by Automatic Tank Gauging
Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels
MPMS
Ch. 3.5
1st
1997
H03051S
$90.00
55, 176
by Automatic Tank Gauging-Spanish
MPMS
Ch. 3.6
Measurement of Liquid Hydrocarbons by Hybrid Tank Measurement Systems
1st
2001
H03061
$104.00
55
MPMS
Ch. 4.1
Introduction
3rd
2005
H04013
$89.00
56
MPMS
Ch. 4.1
Introduction-Spanish
3rd
2005
H40101S
$89.00
56, 176
MPMS
Ch. 4.2
Displacement Provers
3rd
2003
H04023
$134.00
56
MPMS
Ch. 4.2
Displacement Provers-Russian
3rd
2003
H04023R
$134.00
56, 170
MPMS
Ch. 4.4
Tank Provers
2nd
1998
H04042
$90.00
56
MPMS
Ch. 4.5
Master Meter Provers
4th
2016
H40504
$87.00
56
MPMS
Ch. 4.6
Pulse Interpolation
2nd
1999
H04063
$110.00
56
MPMS
Ch. 4.7
Field Standard Test Measures
3rd
2009
H40703
$94.00
56
MPMS
Ch. 4.8
Operation of Proving Systems
3rd
2021
H04083
$150.00
56
Methods of Calibration for Displacement and Volumetric Tank Provers, Part 1-Introduction to the
MPMS
Ch. 4.9.1
2nd
2022
H409012
$127.00
56
Determination of the Volume of Displacement and Tank Provers
Methods of Calibration for Displacement and Volumetric Tank Provers, Part 2-Determination of the
MPMS
Ch. 4.9.2
1st
2005
H409021
$197.00
57
Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration
Methods of Calibration for Displacement and Volumetric Tank Provers, Part 3-Determination of the
MPMS
Ch. 4.9.3
1st
2010
H409031
$80.00
57
Volume of Displacement Provers by the Master Meter Method of Calibration
Methods of Calibration for Displacement and Volumetric Tank Provers, Part 3-Determination of the
MPMS
Ch. 4.9.3
1st
2010
H409031
$80.00
57, 176
Volume of Displacement Provers by the Master Meter Method of Calibration-Spanish
Methods of Calibration for Displacement and Volumetric Tank Provers, Part 4-Determination of the
MPMS
Ch. 4.9.4
1st
2010
H4090401
$90.00
57
Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration
MPMS
Ch. 5.1
General Considerations for Measurement by Meters
4th
2005
H05014
$102.00
57
MPMS
Ch. 5.1
General Considerations for Measurement by Meters-Russian
4th
2005
H05014R
$102.00
57, 171
MPMS
Ch. 5.1
General Considerations for Measurement by Meters-Spanish
4th
2005
H05014SP
$102.00
57, 176
MPMS
Ch. 5.2
Measurement of Liquid Hydrocarbons by Displacement Meters
3rd
2005
H05023
$95.00
57
MPMS
Ch. 5.2
Measurement of Liquid Hydrocarbons by Displacement Meters-Russian
3rd
2005
H50203R
$95.00
57, 171
MPMS
Ch. 5.2
Measurement of Liquid Hydrocarbons by Displacement Meters-Spanish
3rd
2005
H50203SP
$95.00
57, 176
195
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
MPMS
Ch. 5.3
Measurement of Liquid Hydrocarbons by Turbine Meters
5th
2005
H05035
$115.00
58
MPMS
Ch. 5.3
Measurement of Liquid Hydrocarbons by Turbine Meters-Russian
5th
2005
H50305R
$115.00
58, 171
MPMS
Ch. 5.3
Measurement of Liquid Hydrocarbons by Turbine Meters-Spanish
5th
2005
H50305SP
$115.00
58, 176
MPMS
Ch. 5.4
Accessory Equipment for Liquid Meters
4th
2005
H05044
$102.00
58
MPMS
Ch. 5.4
Accessory Equipment for Liquid Meters-Russian
4th
2005
H05044R
$102.00
58, 171
MPMS
Ch. 5.4
Accessory Equipment for Liquid Meters-Spanish
4th
2005
H05044SP
$102.00
58, 176
MPMS
Ch. 5.5
Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems
2nd
2005
H50502
$76.00
58
MPMS
Ch. 5.5
Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems-Spanish
2nd
2005
H50502SP
$76.00
58, 176
MPMS
Ch. 5.6
Measurement of Liquid Hydrocarbons by Coriolis Meters
2nd
2021
H05062
$250.00
58
MPMS
Ch. 5.8
Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters
2nd
2011
H050802
$94.00
58
MPMS
Ch. 5.8
Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters-Russian
2nd
2011
H050802R
$94.00
58, 172
MPMS
Ch. 5.8
Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters-Spanish
2nd
2011
H050802SP
$94.00
58, 176
MPMS
Ch. 6.1
Lease Automatic Custody Transfer (LACT) Systems
2nd
1991
H30121
$66.00
59
MPMS
Ch. 6.1A
Metering Assemblies-General Considerations
1st
2021
H061A1
$110.00
59
MPMS
Ch. 6.2
Loading Rack Metering Systems
3rd
2004
H60203
$86.00
59
$86.00
MPMS
Ch. 6.2
Loading Rack Metering Systems-Spanish
3rd
2004
H60203S
59, 177
MPMS
Ch. 6.2A
Metering Assemblies-Truck and Rail Loading and Unloading Measurement Systems
1st
2021
H062A1
$130.00
59
MPMS
Ch. 6.3A
Metering Assemblies-Pipeline and Marine Loading/Unloading Measurement Systems
1st
2021
H063A1
$120.00
59
MPMS
Ch. 6.5
Metering Systems for Loading and Unloading Marine Bulk Carriers
2nd
1991
H30125
$71.00
59
MPMS
Ch. 6.6
Pipeline Metering Systems
2nd
1991
H30126
$71.00
59
MPMS
Ch. 6.7
Metering Viscous Hydrocarbons
2nd
1991
H30127
$71.00
59
MPMS
Ch. 7.1
Liquid-in-Glass Thermometers
2nd
2017
H70102
$119.00
59
MPMS
Ch. 7.2
Portable Electronic Thermometers
3rd
2018
H70203
$116.00
59
MPMS
Ch. 7.3
Fixed Automatic Tank Temperature Systems
2nd
2011
H70302
$90.00
60
MPMS
Ch. 7.3
Fixed Automatic Tank Temperature Systems-Spanish
2nd
2011
H70302SP
$90.00
60, 177
MPMS
Ch. 7.4
Dynamic Temperature Measurement
2nd
2018
H70402
$109.00
60
Ch. 7.5/ISO
Automatic Tank Temperature Measurement Onboard Marine Vessels Carrying Refrigerated
MPMS
1st
2014
HH70501
$103.00
60
8310:2012
Hydrocarbon and Chemical Gas Fluids
MPMS
Ch. 8.1
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
6th
2022
H8.106
$85.00
60
MPMS
Ch. 8.2
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
6th
2022
H8.206
$82.00
60
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum
MPMS
Ch. 8.3
2nd
2019
H08032
$69.00
60
Products
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum
MPMS
Ch. 8.3
2nd
2019
H08032R
$69.00
60, 172
Products-Russian
MPMS
Ch. 8.4
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
5th
2020
H08045
$50.00
60
MPMS
Ch. 8.4
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement-Russian
5th
2020
H080405R
$50.00
61, 172
Standard Practice for Manual Piston Cylinder Sampling of Volatile Crude Oils, Condensates, and
MPMS
Ch. 8.5
2nd
2022
H8.502
$60.00
61
Liquid Petroleum Products
Refrigerated Light Hydrocarbon Fluids-Sampling of Liquified Natural Gas-Continuous and
MPMS
Ch. 8.6/ISO 8943
1st
2020
H08061
$110.00
61
Intermittent Methods
Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude
MPMS
Ch. 9.1
3rd
2012
H09013
$45.00
61
Petroleum and Liquid Petroleum Products by Hydrometer Method
Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure
MPMS
Ch. 9.2
3rd
2012
H09023
$45.00
61
Hydrometer
Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid
MPMS
Ch. 9.3
3rd
2012
H09033
$45.00
61
Petroleum Products by Thermohydrometer Method
MPMS
Ch. 9.4
Continuous Density Measurement Under Dynamic (Flowing) Conditions
1st
2018
H09041
$168.00
62
MPMS
Ch. 10.1
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
4th
2022
H10.104
$57.00
62
MPMS
Ch. 10.2
Standard Test Method for Water in Crude Oil by Distillation
5th
2022
H10.205
$63.00
62
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory
MPMS
Ch. 10.3
5th
2022
H10.305
$63.00
62
Procedure)
MPMS
Ch. 10.4
Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)
5th
2020
H100405
$120.00
62
MPMS
Ch. 10.5
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
5th
2013
H100505
$45.00
62
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory
MPMS
Ch. 10.6
6th
2022
H10.606
$57.00
62
Procedure)
MPMS
Ch. 10.8
Standard Test Method for Sediment in Crude Oil by Membrane Filtration
2nd
2005
H100802
$42.00
62
MPMS
Ch. 10.9
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
3rd
2013
H10093
$45.00
62
MPMS
Ch. 10.9
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration-Spanish
3rd
2013
H100903SP
$45.00
62, 177
Standard Document and API 11.1 VCF Application-Temperature and Pressure Volume Correction
MPMS
Ch. 11.1
2004
H11013
See Listing
63
Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils
196
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
MPMS
Ch. 11.1
Add-In Program for Microsoft® Excel
See Listing
63
MPMS
Ch. 11.1
Dynamic Link Library (DLL)
See Listing
63
MPMS
Ch. 11.1
Source Code
See Listing
64
MPMS
Ch. 11.1
Source Code, DLL & XL Add-In-Combined
See Listing
64
MPMS
Ch. 11.2
Data File of Chapters 11.2.2 and 11.2.2M
1st
1984
H27320
$321.00
64
Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and -50
MPMS
Ch. 11.2.2
2nd
1986
H27307
$185.00
64
°F to 140 °F Metering Temperature
Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Meter Density (15 °C)
MPMS
Ch. 11.2.2M
1st
1986
H27309
$185.00
64
and -46 °C to 60 °C Metering Temperature
Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Meter Density (15 °C)
MPMS
Ch. 11.2.2M
1st
1986
H27309R
$185.00
64, 173
and -46 °C to 60 °C Metering Temperature-Russian
MPMS
Ch. 11.2.4
Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 54E, 59E, 60E
2nd
2019
H1102042
$205.00
64
Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 54E, 59E, 60E-
MPMS
Ch. 11.2.4
2nd
2019
H1102042R
$205.00
64, 173
Russian
MPMS
Ch. 11.2.5
A Simplified Vapor Pressure Correlation for Commercial NGLs
2nd
2020
H1102052
$110.00
64
MPMS
Ch. 11.3.2.1
Ethylene Density
2nd
2013
H1132102
$66.00
64
Miscellaneous Hydrocarbon Product Properties-Denatured Ethanol Density and Volume
MPMS
Ch. 11.3.3
3rd
2019
H1103033
$160.00
65
Correction Factors
MPMS
Ch. 11.3.3.2
Propylene Compressibility
1974
H25656
$321.00
65
Miscellaneous Hydrocarbon Product Properties-Denatured Ethanol and Gasoline Component
MPMS
11.3.4
1st
2019
H11030401
$180.00
65
Blend Densities and Volume Correction Factors
Properties of Reference Materials, Part 1-Density of Water and Water Volumetric Correction
MPMS
Ch. 11.4.1
2nd
2018
H11412
$81.00
65
Factors for Water Calibration of Volumetric Provers
Ch. 11.5, Parts 1
MPMS
Density/Weight/Volume Intraconversion
1st
2009
H1105CD
$268.00
65
to 3
MPMS
Ch. 12.1.1
Calculation of Static Petroleum Quantities, Part 1-Upright Cylindrical Tanks and Marine Vessels
4th
2019
H1201014
$125.00
66
Calculation of Static Petroleum Quantities, Part 1-Upright Cylindrical Tanks and Marine Vessels-
MPMS
Ch. 12.1.1
4th
2019
H1201014
$125.00
66, 177
Spanish
MPMS
Ch. 12.1.2
Calculation of Static Petroleum Quantities, Part 2-Calculation Procedures for Tank Cars
2nd
2018
H12122
$128.00
66
Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric
MPMS
Ch. 12.2
2nd
2021
H12202
$200.00
67
Correction Factors
Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric
MPMS
Ch. 12.2.4
1st
1997
H12024
$133.00
67
Correction Factors, Part 4-Calculation of Base Prover Volumes by Waterdraw Method
Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric
MPMS
Ch. 12.2.5
1st
2001
H12025
$184.00
67
Correction Factors, Part 5-Base Prover Volume Using Master Meter Method
MPMS
Ch. 12.3
Calculation of Volumetric Shrinkage from Blending Light Hydrocarbons with Crude Oils
1st
1996
H12031
$97.00
67
MPMS
Ch. 13.2
Methods of Evaluating Meter Proving Data
2nd
2018
H13022
$105.00
67
MPMS
Ch. 13.3
Measurement Uncertainty
2nd
2017
H130302
$122.00
67
MPMS
Ch. 13.3
Measurement Uncertainty-Spanish
2nd
2017
H130302S
$122.00
67, 177
MPMS
Ch. 14.1
Collecting and Handling of Natural Gas Samples for Analysis by Gas Chromatography
8th
2022
H14.108
$294.00
67
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric Square-Edged
MPMS
Ch. 14.3.1
4th
2012
H1403014
$196.00
68
Orifice Meters, Part 1: General Equations and Uncertainty Guidelines
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric, Square-Edged
MPMS
Ch. 14.3.2
5th
2016
H1403025
$204.00
68
Orifice Meters, Part 2: Specification and Installation Requirements
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric, Square-Edged
MPMS
Ch. 14.3.3
4th
2013
H1403034
$239.00
68
Orifice Meters, Part 3: Natural Gas Applications
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric, Square-Edged
MPMS
Ch. 14.3.4
Orifice Meters, Part 4: Background, Development, Implementation Procedure, and Example
4th
2019
H1403044
$186.00
68
Calculations
MPMS
Ch. 14.4
Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes
2nd
2017
H140402
$71.00
68
Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon
MPMS
Ch. 14.5
3rd
2009
H140503
$79.00
68
Liquid Content for Natural Gas Mixtures for Custody Transfer
MPMS
Ch. 14.7
Mass Measurement of Natural Gas Liquids and Other Hydrocarbons
5th
2018
H140705
$77.00
68
MPMS
Ch. 14.9
Measurement of Natural Gas by Coriolis Meter
2nd
2013
See Listing
68
MPMS
Ch. 14.10
Measurement of Flow to Flares
2nd
2021
H140102
$150.00
69
MPMS
Ch. 14.12
Measurement of Gas by Vortex Meters
1st
2017
H140121
$94.00
69
Simplified Metering System Design and Performance-Based Methodology for Non-Custody Gas
MPMS
Ch. 14.13
1st
2022
H14.1301
$150.00
69
Measurement
MPMS
Ch. 15
Guidelines for the Use of Petroleum Industry-Specific International System (SI) Units
4th
2019
H15004
$130.00
69
Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic
MPMS
Ch. 16.2
1st
1994
H16021
$105.00
69
Tank Gauging
MPMS
Ch. 17.1
Guidelines for Marine Inspection
7th
2022
H170107
$180.00
69
MPMS
Ch. 17.2
Measurement of Cargoes On Board Tank Vessels
2nd
1999
H17022
$143.00
69
197
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
MPMS
Ch. 17.2
Measurement of Cargoes On Board Tank Vessels-Spanish
2nd
1999
H1702SP
$143.00
70, 177
Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo
MPMS
Ch. 17.3
2nd
2016
H170302
$131.00
70
Movements
Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo
MPMS
Ch. 17.3
2nd
2016
H170302S
$131.00
70, 177
Movements-Spanish
MPMS
Ch. 17.4
Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)
2nd
2016
H170402
$119.00
70
MPMS
Ch. 17.4
Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB)-Spanish
2nd
2016
H170402S
$119.00
70, 177
MPMS
Ch. 17.5
Guidelines for Voyage Analysis and Reconciliation of Cargo Quantities
4th
2019
H170504
$160.00
70
MPMS
Ch. 17.6
Guidelines for Determining Fullness of Pipelines Between Vessels and Shore Tanks
3rd
2022
H17.603
$183.00
70
Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks and Their Cargo-Handling
MPMS
Ch. 17.8
2nd
2016
H170802
$117.00
70
Systems
Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks and Their Cargo-Handling
MPMS
Ch. 17.8
2nd
2016
H170802S
$117.00
70, 177
Systems-Spanish
MPMS
Ch. 17.9
Vessel Experience Factor (VEF)
3rd
2019
H170903
$185.00
70
Ch. 17.10.1/ISO
MPMS
Refrigerated Light Hydrocarbon Fluids-Measurement of Cargoes on Board Marine LNG Carriers
2nd
2021
HH171012
$180.00
71
10976:2015
Measurement of Cargoes On Board Marine Gas Carriers, Part 2-Liquefied Petroleum and
MPMS
Ch. 17.10.2
2nd
2016
H171022
$163.00
71
Chemical Gases
Measurement and Sampling of Cargoes On Board Tank Vessels Using Closed and Restricted
MPMS
Ch. 17.11
2nd
2016
H170112
$117.00
71
Equipment
Measurement and Sampling of Cargoes On Board Tank Vessels Using Closed and Restricted
MPMS
Ch. 17.11
2nd
2016
H170112S
$117.00
71, 177
Equipment-Spanish
MPMS
Ch. 17.12
Procedures for Bulk Liquid Chemical Cargo Inspections
2nd
2015
H170122
$177.00
71
MPMS
Ch. 17.12
Procedures for Bulk Liquid Chemical Cargo Inspections-Spanish
2nd
2015
H170122S
$177.00
71, 177
MPMS
17.4.1
Measurement of Bulk Cargoes by Draft Survey, Part 1: Ocean-Going Vessels
1st
2019
H1714101
$160.00
71
MPMS
17.4.2
Measurement of Bulk Cargoes by Draft Survey, Part 2: Inland Barges
1st
2019
H1714201
$150.00
71
MPMS
Ch. 18.1
Measurement Procedures for Crude Oil Gathered from Lease Tanks by Truck
3rd
2018
H18013
$131.00
71
MPMS
Ch. 18.2
Custody Transfer of Crude Oil from Lease Tanks Using Alternative Measurement Methods
1st
2016
H180201
$136.00
71
MPMS
Ch. 19.1
Evaporative Loss from Fixed-Roof Tanks
5th
2017
H190105
$168.00
72
Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1-
MPMS
Ch. 19.1D
1st
1993
H30553
$185.00
72
Evaporative Loss from Fixed-Roof Tanks
MPMS
Ch. 19.2
Evaporative Loss from Floating-Roof Tanks
4th
2020
H190204
$210.00
72
Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-
MPMS
Ch. 19.3, Part A
1st
1997
H1903A
$133.00
73
Roof Tanks
MPMS
Ch. 19.3, Part B
Air Concentration Test Method-Rim-Seal Loss Factors for Floating-Roof Tanks
1st
1997
H1903B
$133.00
73
Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof
MPMS
Ch. 19.3, Part C
1st
1998
H1903C
$133.00
73
Tanks
Fugitive Emission Test Method for the Measurement of Deck-Seam Loss Factors for Internal
MPMS
Ch. 19.3, Part D
1st
2001
H1903D
$133.00
73
Floating-Roof Tanks
Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-
MPMS
Ch. 19.3, Part E
1st
1997
H1903E
$133.00
73
Roof Tanks
MPMS
Ch. 19.3, Part H
Specification for Establishing Evaporative Loss Factors for Floating-Roof Tank Devices
2nd
2022
H1903H02
$146.00
73
MPMS
Ch. 19.4
Evaporative Loss Reference Information and Speciation Methodology
3rd
2012
H190403
$213.00
73
MPMS
Ch. 19.5
Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations
1st
2009
H19051
$135.00
74
MPMS
Ch. 19.6.1
Evaporative Loss from Storage Tank Floating-Roof Landings
1st
2017
H1906011
$136.00
74
MPMS
Ch. 19.6.2
Evaporative Loss from the Cleaning of Storage Tanks
1st
2019
H1906021
$150.00
74
MPMS
Ch. 20.1
Allocation Measurement
1st
1993
H30701
$118.00
75
MPMS
Ch. 20.2
Production Allocation Measurement Using Single-Phase Devices
1st
2016
H200201
$135.00
75
MPMS
Ch. 20.2
Production Allocation Measurement Using Single-Phase Devices-Spanish
1st
2016
H200201S
$135.00
75, 177
MPMS
Ch. 20.3
Measurement of Multiphase Flow
1st
2013
H200301
$195.00
75
MPMS
Ch. 20.3
Measurement of Multiphase Flow-Russian
1st
2013
H200301R
$195.00
75, 174
MPMS
Ch. 20.5
Recommended Practice for Application of Production Well Testing in Measurement and Allocation
1st
2017
H200501
$202.00
75
MPMS
Ch. 21.1
Flow Measurement Using Electronic Metering Systems-Electronic Gas Measurement
2nd
2013
H210102
$179.00
76
MPMS
Ch. 21.2
Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters
1st
1998
H21021
$207.00
76
MPMS
Ch. 21.2-A1
Addendum 1 to Flow Measurement Using Electronic Metering Systems, Inferred Mass
1st
2000
H2102A
$66.00
77
General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of
MPMS
Ch. 22.1
2nd
2015
H220102
$95.00
79
Hydrocarbon Fluids
MPMS
Ch. 22.2
Testing Protocols-Differential Pressure Flow Measurement Devices
2nd
2017
H220202
$113.00
77
MPMS
Ch. 22.3
Testing Protocol for Flare Gas Metering
1st
2015
H220301
$107.00
77
MPMS
Ch. 22.4
Testing Protocol for Pressure, Differential Pressure, and Temperature Measuring Devices
1st
2018
H220401
$81.00
77
MPMS
Ch. 22.6
Testing Protocol for Gas Chromatographs
1st
2015
H220601
$107.00
77
198
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
MPMS
Ch. 23.1
Reconciliation of Liquid Pipeline Quantities
1st
2016
H230101
$103.00
77
MPMS
Ch. 23.2
Reconciliation of Liquid Tank Car(s)Quantities
1st
2020
H230202
$120.00
78
Bull
D16
Suggested Procedure for Development of a Spill Prevention Control and Countermeasure Plan
5th
2011
GD1605
See Listing
50, 154
Generic Hazardous Chemical Category List and Inventory for the Oil and Gas Exploration and
Bull
E1
2nd
1990
G11000
$154.00
51
Production Industry
Bull
E2
Management of Naturally Occurring Radioactive Materials (NORM) in Oil and Gas Production
2nd
2006
GE2002
$133.00
51
Bull
E3
Wellbore Plugging and Abandonment Practices
2nd
2018
G11008
$149.00
20
Environmental Guidance Document: Release Reporting for the Oil and Gas Exploration and
Bull
E4
Production Industry as Required by the Clean Water Act, the Comprehensive Environmental
2nd
2003
GE4002
$183.00
51
Response, Compensation and Liability Act, and the Emergency Planning and Community
Environmental Guidance Document: Waste Management in Exploration and Production
API
E5
2nd
1997
GE5002
$136.00
52
Operations
Specification for Quality Management System Requirements for Manufacturing Organizations for
Spec
Q1
9th
2013
G0Q109
$131.00
1
the Petroleum and Natural Gas Industry
Specification for Quality Management System Requirements for Manufacturing Organizations for
Spec
Q1
9th
2013
G0Q109C
$131.00
1, 167
the Petroleum and Natural Gas Industry-Chinese
Specification for Quality Management System Requirements for Manufacturing Organizations for
Spec
Q1
9th
2013
G0Q109P
$131.00
1, 169
the Petroleum and Natural Gas Industry-Portuguese
Specification for Quality Management System Requirements for Manufacturing Organizations for
Spec
Q1
9th
2013
G0Q109R
$131.00
1, 169
the Petroleum and Natural Gas Industry-Russian
Specification for Quality Management System Requirements for Manufacturing Organizations for
Spec
Q1
9th
2013
G0Q109SP
$131.00
1, 176
the Petroleum and Natural Gas Industry-Spanish
Quality Management System Requirements for Service Supply Organizations for the Petroleum
Spec
Q2
2nd
2021
G0Q202R
$96.00
1
and Natural Gas Industries
Quality Management System Requirements for Service Supply Organizations for the Petroleum
Spec
Q2
2nd
2021
G0Q201R
$96.00
1, 169
and Natural Gas Industries-Russian
RP
T-1
Creating Orientation Programs for Personnel Going Offshore
5th
2016
GT1005
$71.00
48
Recommended Practice for Qualification Programs for Offshore Production Personnel Who Work
RP
T-2
2nd
2001
GT2002
$65.00
48
with Safety Devices
RP
T-4
Training of Offshore Personnel in Nonoperating Emergencies
2nd
1995
GT4002
$65.00
48
Recommended Practice for Training and Qualification of Personnel in Well Control Equipment and
RP
T-6
1st
2002
GT0601
$65.00
48
Techniques for Wireline Operations on Offshore Locations
RP
T-7
Training of Personnel in Rescue of Persons in Water
2nd
1995
GT7002
$62.00
48
RP
T-8
Fundamental Safety Training for Offshore Personnel
1st
2019
GT8001
$65.00
48
RS
032
An Empirical Analysis of the Determinants of Petroleum Drilling
1983
See Listing
165
RS
051
The Use of Economic Incentive Mechanisms in Environmental Management
1990
See Listing
165
RS
053
Reducing Emissions from Older Vehicles
1990
See Listing
165
RS
056
Economics of Alternative Fuel Use: Compressed Natural Gas as a Vehicle Fuel
1990
See Listing
165
RS
064
U.S. Petroleum Supply: History, Prospects, and Policy Implications
1992
See Listing
165
RS
067
The Cost Effectiveness of Vehicle Inspection and Maintenance Programs
1993
See Listing
166
DP
074
Current Status of Watershed Management in the United States
1993
See Listing
165
RS
074
Air Emissions Banking and Trading: Analysis and Implications for Wetland Mitigation Banking
1994
See Listing
166
Improving Cost-Effectiveness Estimation: A Reassessment of Control Options to Reduce Ozone
RS
075
1994
See Listing
166
Precursor Emissions
RS
076
Paying for Automobile Insurance at the Pump: A Critical Review
1994
See Listing
166
DP
077
Alternative Wetland Mitigation Programs
1995
See Listing
165
DP
081
Are We Running Out of Oil?
1995
See Listing
165
RS
082
Superfund Liability and Taxes: Petroleum Industry Shares in Their Historical Context
1996
See Listing
166
DP
084R
Analysis of the Costs and Benefits of Regulations: Review of Historical Experience
1996
See Listing
165
DP
086
Opposition to OCS Development, Historical Context and Economic Considerations
1996
See Listing
165
DP
088
Restoring Natural Resources: Legal Background and Economic Analysis
1997
See Listing
165
RS
094
How Unilateral Economic Sanctions Affect the U.S. Economy: An Inter-Industry Analysis
1998
See Listing
166
RP
1FSC
Facilities Systems Completion Planning and Execution
1st
2013
G1FSC01
$66.00
2
TR
1PER15K-1
Protocol for Verification and Validation of High-Pressure High-Temperature Equipment
1st
2013
G1PER15K11
$159.00
2
TR
2A-LFS
Load Factor Study for API Recommended Practice 2A-LRFD
1st
2020
G2ALFS01
$120.00
2
Planning, Designing, and Constructing Fixed Offshore Platforms-Load and Resistance Factor
RP
2A-LRFD
2nd
2019
G2ALRFD2
$387.00
2
Design
RP
2A-WSD
Planning, Designing, and Constructing Fixed Offshore Platforms-Working Stress Design
22nd
2014
G2AWSD22
$428.00
3
RP
2A-WSD
Planning, Designing, and Constructing Fixed Offshore Platforms- Working Stress Design-Russian
22nd
2014
G2AWSD22R
$428.00
3, 170
Spec
2B
Specification for the Fabrication of Structural Steel Pipe
6th
2001
G02B06
$90.00
3
Spec
2B
Specification for the Fabrication of Structural Steel Pipe-Chinese
6th
2001
G02B06C
$90.00
3, 167
Spec
2B
Specification for the Fabrication of Structural Steel Pipe-Russian
6th
2001
G02B06R
$90.00
3, 170
199
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
Spec
2C
Offshore Pedestal-Mounted Cranes
8th
2020
G02C08
$175.00
3
Std
2CCU
Offshore Cargo Carrying Units
1st
2017
G2CCU01
$114.00
29
RP
2D
Operation and Maintenance of Offshore Cranes
7th
2014
G02D07
$157.00
3
RP
2D-2
Training for Offshore Pedestal-mounted Crane Riggers, Operators, and Inspectors
1st
2020
G02D21
$90.00
3
2EQ/ISO 19901-
RP
Seismic Design Procedures and Criteria for Offshore Structures
1st
2014
GG2EQ01
$136.00
3
2:2004
Spec
2F
Specification for Mooring Chain
6th
1997
G02F06
$97.00
3
Spec
2F
Specification for Mooring Chain-Chinese
6th
1997
G02F06C
$97.00
4, 167
RP
2FB
Recommended Practice for Design of Offshore Facilities Against Fire and Blast Loading
1st
2006
G2FB01
$171.00
4
TR
2FC-1
Studlink and Studless Fatigue Curves for Mooring Lines
1st
2020
G02FC101
$75.00
4
TR
2FC-2
Fatigue TN Curves for Chain, Wire, and Polyester Mooring Lines
1st
2020
G02FC201
$65.00
4
RP
2FPS
Planning, Designing, and Constructing Floating Production Systems
2nd
2011
G2FPS02
$202.00
4
RP
2FSIM
Floating Systems Integrity Management
1st
2019
G2FSIM01
$175.00
4
2GEO/ISO 19901-
RP
Geotechnical and Foundation Design Considerations
1st
2011
GG2GEO01
$167.00
4
4:2003
Spec
2H
Specification for Carbon Manganese Steel Plate for Offshore Structures
9th
2006
G02H09
$102.00
4
Bull
2HINS
Guidance for Post-Hurricane Structural Inspection of Offshore Structures
1st
2009
G2HINS01
$90.00
5
RP
2I
In-Service Inspection of Mooring Hardware for Floating Structures
3rd
2008
G02I03
$160.00
5
RP
2MET
Deprivation of Metocean Design and Operating Considerations
2nd
2019
GG2MET02
$227.00
5
RP
2MIM
Mooring Integrity Management
1st
2019
G2MIM01
$137.00
5
2MOP/ISO 19901-
RP
Marine Operations
1st
2010
GG2M0P1
$263.00
5
6:2009
Spec
2MT1
Specification for Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures
2nd
2001
G2MT12
$90.00
5
Spec
2MT2
Rolled Shapes with Improved Notch Toughness
1st
2002
G2MT21
$86.00
5
2N/ISO
RP
Planning, Designing, and Constructing Structures and Pipelines for Arctic Conditions
3rd
2015
G02N03
$216.00
6
19906:2010
TR
2PY
Effect of Best-estimate Geotechnical p-y Curves on Performance of Offshore Structures
1st
2020
G2PY01
$105.00
6
Std
2RD
Dynamic Risers for Floating Production Systems
2nd
2013
G2RD02
$265.00
6
RP
2RIM
Integrity Management of Risers from Floating Production Facilities
1st
2019
G2RIM01
$137.00
6
Bull
2S
Design of Windlass Wildcats for Floating Offshore Structures
2nd
1995
G02S02
$82.00
6
Spec
2SC
Manufacture of Structural Steel Castings for Primary Offshore Applications
1st
2009
G2SC01
$123.00
6
Spec
2SF
Manufacture of Structural Steel Forgings for Primary Offshore Applications
1st
2013
G2SF01
$93.00
6
RP
2SIM
Structural Integrity Management of Fixed Offshore Structures
1st
2014
G2SIM01
$184.00
6
RP
2SK
Design and Analysis of Stationkeeping Systems for Floating Structures
3rd
2005
G2SK03
$138.00
7
Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore
RP
2SM
2nd
2014
G2SM02
$201.00
7
Mooring
RP
2T
Planning, Designing and Constructing Tension Leg Platforms
3rd
2010
G02T03
$246.00
7
Bull
2TD
Guidelines for Tie-Downs on Offshore Production Facilities for Hurricane Season
1st
2006
G2TD01
$56.00
7
RP
2TOP
Topsides Structure
1st
2019
G2TOP1
$156.00
7
Bull
2U
Bulletin on Stability Design of Cylindrical Shells
3rd
2004
G02U03
$207.00
7
Bull
2V
Design of Flat Plate Structures
3rd
2004
G02V03
$207.00
7
Spec
2W
Steel Plates Produced by Thermo-Mechanically Controlled Processing for Offshore Structures
6th
2019
G02W06
$105.00
7
Steel Plates Produced by Thermo-Mechanically Controlled Processing for Offshore Structures-
Spec
2W
6th
2019
G02W06R
$105.00
7, 170
Russian
Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural
RP
2X
4th
2004
G02X04
$159.00
7
Fabrication and Guidelines for Qualification of Technicians
Spec
2Y
Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures
5th
2006
G02Y05
$102.00
8
RP
2Z
Recommendation Practice for Preproduction Qualification for Steel Plates for Offshore Structures
4th
2005
G02Z04
$130.00
8
Recommendation Practice for Preproduction Qualification for Steel Plates for Offshore Structures-
RP
2Z
4th
2005
G02Z04R
$130.00
8, 170
Russian
Spec
4F
Specification for Drilling and Well Servicing Structures
5th
2020
G04F05
$136.00
8
RP
4G
Operation, Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures
5th
2019
G04G05
$126.00
8
5A3/ISO
Recommended Practice on Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem
RP
3rd
2009
GX5A303
$157.00
8
13678:2010
Elements
5A3/ISO
Recommended Practice on Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem
RP
3rd
2009
GX5A303R
$157.00
8, 170
13678:2010
Elements-Russian
5A5/ISO
RP
Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe
7th
2005
GX5A507
$171.00
9
15463:2003
5A5/ISO
RP
Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe-Chinese
7th
2005
GX5A507C
$171.00
9, 167
15463:2003
200
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
5A5/ISO
RP
Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe-Russian
7th
2005
GX5A507R
$171.00
9, 170
15463:2003
Spec
5B
Threading, Gauging, and Inspection of Casing, Tubing, and Line Pipe Threads
16th
2017
G5B016
$163.00
9
Spec
5B
Threading, Gauging, and Inspection of Casing, Tubing, and Line Pipe Threads-Russian
16th
2017
G5B016R
$163.00
9, 170
RP
5B1
Gauging and Inspection of Casing, Tubing and Line Pipe Threads
5th
1999
G05B105
$154.00
9
RP
5B1
Gauging and Inspection of Casing, Tubing and Line Pipe Threads-Kazakh
5th
1999
G05B15K
$154.00
9, 168
RP
5B1
Gauging and Inspection of Casing, Tubing and Pipe Line Threads-Russian
5th
1999
G05B15R
$154.00
9, 170
RP
5C1
Recommended Practice for Care and Use of Casing and Tubing
18th
1999
G05C18
$124.00
9
RP
5C1
Recommended Practice for Care and Use of Casing and Tubing-Chinese
18th
1999
G05C18C
$124.00
9, 167
RP
5C1
Recommended Practice for Care and Use of Casing and Tubing-Russian
18th
1999
G05C18R
$124.00
9, 170
TR
5C3
Calculating Performance Properties of Pipe Used as Casing or Tubing
7th
2018
G5C307
$246.00
10
RP
5C5
Procedures for Testing Casing and Tubing Connections
4th
2017
GX5C504
$195.00
10
RP
5C5
Procedures for Testing Casing and Tubing Connections-Russian
4th
2017
GX5C504R
$195.00
10, 170
RP
5C6
Pipe with Welded Connectors
3rd
2018
G05C63
$103.00
10
RP
5C6
Pipe with Welded Connectors-Russian
3rd
2018
G05C63R
$103.00
10, 172
RP
5C8
Care, Maintenance, and Inspection of Coiled Tubing
1st
2017
G05C801
$131.00
10
5CRA/ISO
Corrosion-Resistant Alloy Seamless Products for Use as Casing, Tubing, Coupling Stock, and
Spec
2nd
2022
G5CRA02
$185.00
10
13680:2020
Accessory Material
Spec
5CT
Casing and Tubing
10th
2018
G5CT010
$282.00
10
Spec
5CT
Casing and Tubing-Chinese
10th
2018
G5CT010C
$282.00
10, 167
Spec
5CT
Casing and Tubing-Russian
10th
2018
G5CT010R
$282.00
10, 170
Spec
5DP
Drill Pipe
2nd
2020
G5DP02
$216.00
10
Spec
5DP
Drill Pipe-Russian
2nd
2020
G5DP02R
$216.00
11, 170
RP
5EX
Design, Verification, and Application of Solid Expandable Systems
1st
2018
G5EX01
$114.00
11
Spec
5L
Line Pipe
46th
2018
G05L46
$298.00
11
Spec
5L
Line Pipe-Chinese
46th
2018
G05L46C
$298.00
11, 167
Spec
5L
Line Pipe-Russian
46th
2018
G05L46R
$298.00
11, 170
RP
5L1
Recommended Practice for Railroad Transportation of Line Pipe
7th
2009
G5L107
$65.00
11
RP
5L1
Recommended Practice for Railroad Transportation of Line Pipe-Russian
7th
2009
G5L107R
$65.00
11, 171
RP
5L3
Drop-Weight Tear Tests on Line Pipe
4th
2014
G5L304
$103.00
11
RP
5L3
Drop-Weight Tear Tests on Line Pipe-Russian
4th
2014
G5L304R
$103.00
11, 171
RP
5L8
Recommended Practice for Field Inspection of New Line Pipe
2nd
1996
G05L82
$136.00
11
RP
5L8
Recommended Practice for Field Inspection of New Line Pipe-Kazakh
2nd
1996
G05L82K
$136.00
11, 168
RP
5L8
Recommended Practice for Field Inspection of New Line Pipe-Russian
2nd
1996
G05L82R
$136.00
11, 171
Spec
5LC
CRA Line Pipe
4th
2015
G5LC04
$189.00
12
Spec
5LC
CRA Line Pipe-Russian
4th
2015
G5LC04R
$189.00
12, 171
Spec
5LCP
Specification on Coiled Line Pipe
2nd
2006
G5LCP2
$158.00
12
Spec
5LCP
Specification on Coiled Line Pipe-Chinese
2nd
2006
G5LCP2C
$158.00
12, 167
Spec
5LCP
Specification on Coiled Line Pipe-Russian
2nd
2006
G5LCP2R
$158.00
12, 171
Spec
5LD
CRA Clad or Lined Steel Pipe
4th
2015
G5LD04
$157.00
12
Spec
5LD
CRA Clad or Lined Steel Pipe-Russian
4th
2015
G5LD04R
$157.00
12, 171
RP
5LT
Recommended Practice for Truck Transportation of Line Pipe
1st
2012
G5LT01
$65.00
12
RP
5LT
Recommended Practice for Truck Transportation of Line Pipe-Chinese
1st
2012
G5LT01C
$65.00
12, 167
RP
5LT
Recommended Practice for Truck Transportation of Line Pipe-Russian
1st
2012
G5LT01R
$65.00
12, 171
RP
5LW
Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels
3rd
2009
G5LW03
$65.00
12
RP
5LW
Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels-Russian
3rd
2009
G5LW03R
$65.00
12, 171
RP
5MT
Pipeline Inspection Documents for Material Traceability and Electronic Test Reports
1st
2021
G5MT01
$75.00
12
Spec
5ST
Specification for Coiled Tubing-U.S. Customary and SI Units
1st
2010
G5ST01
$145.00
13
Spec
5ST
Specification for Coiled Tubing-U.S. Customary and SI Units-Chinese
1st
2010
G5ST01C
$145.00
13, 167
Spec
5ST
Specification for Coiled Tubing-U.S. Customary and SI Units-Russian
1st
2010
G5ST01R
$145.00
13, 171
Bull
5T1
Imperfection and Defect Terminology
11th
2017
G05T111
$138.00
13
Bull
5T1
Imperfection and Defect Terminology-Russian
11th
2017
G05T111R
$138.00
13, 171
TR
5TP
Torque-Position Assembly Guidelines for API Casing and Tubing Connections
1st
2013
G5TP01
$124.00
13
TR
5TP
Torque-Position Assembly Guidelines for API Casing and Tubing Connections-Russian
1st
2013
G5TP01R
$124.00
13, 171
TR
5TRSR22
Technical Report in SR22 Supplementary Requirements for Enhanced Leak Resistance LTC
1st
2002
GSR221
$96.00
13
RP
5UE
Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections
2nd
2005
G5UE02
$86.00
13
RP
5UE
Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections-Russian
2nd
2005
G5UE02R
$86.00
13, 171
Spec
6A
Specification for Wellhead and Tree Equipment
21st
2018
GX06A21
$310.00
13
201
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
Spec
6A
Specification for Wellhead and Tree Equipment-Russian
21st
2018
GX06A21R
$310.00
14, 172
Std
6ACRA
Age-Hardened Nickel-Based Alloys for Oil and Gas Drilling and Production Equipment
1st
2015
G6ACRA1
$98.00
14
Std
6ACRA
Age-Hardened Nickel-Based Alloys for Oil and Gas Drilling and Production Equipment-Russian
1st
2015
G6ACRA1R
$98.00
14, 172
TR
6AF
Technical Report on Capabilities of API Flanges Under Combinations of Load
3rd
2008
G6AF03
$163.00
14
TR
6AF
Technical Report on Capabilities of API Flanges Under Combinations of Load-Russian
3rd
2008
G6AF03R
$163.00
14, 172
TR
6AF1
Technical Report on Temperature Derating of API Flanges Under Combination of Loading
2nd
1998
G06AF1
$171.00
14
TR
6AF2
Technical Report on Capabilities of API Integral Flanges Under Combination of Loading-Phase II
5th
2013
G6AF25
$184.00
14
TR
6AF3
High-pressure High-temperature (HPHT) Flange Design Methodology
1st
2020
G6AF301
$86.00
15
TR
6AM
Technical Report on Material Toughness
2nd
1995
G06AM2
$82.00
15
Std
6AR
Repair and Remanufacture of Wellhead and Tree Equipment
2nd
2019
G6AR02
$75.00
15
Spec
6AV1
Validation of Safety and Shutdown Valves for Sandy Service
3rd
2018
G6AV103
$105.00
15
Std
6AV2
Installation, Maintenance and Repair of Safety Valves
2nd
2020
G6AV202
$160.00
15
Spec
6D
Specification for Pipeline and Piping Valves
25th
2021
G6D025
$180.00
15
RP
6DR
Recommended Practice for the Repair and Remanufacture of Pipeline Valves
2nd
2012
G06DR2
$84.00
15
RP
6DR
Recommended Practice for the Repair and Remanufacture of Pipeline Valves-Russian
2nd
2012
G06DR2R
$84.00
15, 172
Spec
6DSS
Specification for Subsea Pipeline Valves
3rd
2017
G6DSS3
$179.00
15
Spec
6DSS
Specification for Subsea Pipeline Valves-Russian
3rd
2017
G6DSS3R
$179.00
16, 172
Std
6DSSX
Operator and Mounting Kits for Subsea Valves
1st
2021
G6DSSX1
$156.00
16
Std
6DX
Standard for Actuators and Mounting Kits for Valves
2nd
2020
G6DX02
$156.00
16
Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API
TR
6F1
3rd
1999
G06F13
$124.00
16
Specification 6FA
TR
6F2
Technical Report on Fire Resistance Improvements for API Flanges
3rd
1999
G06F23
$118.00
16
Std
6FA
Standard for Fire Test for Valves
5th
2020
G064A5
$110.00
16
Spec
6FB
Standard for Fire Test for End Connectors
4th
2019
G06FB4
$75.00
16
Heat Treatment and Testing of Carbon and Low Alloy Steel Large Cross Section and Critical
RP
6HT
2nd
2013
G6HT02
$93.00
16
Section Components
Heat Treatment and Testing of Carbon and Low Alloy Steel Large Cross Section and Critical
RP
6HT
2nd
2013
G6HT02R
$93.00
16, 172
Section Components-Russian
RP
6J
Testing of Oilfield Elastomers
2nd
2022
G6J02
$97.00
16
TR
6J1
Elastomer Life Estimation Testing Procedures
1st
2000
G06J11
$86.00
16
TR
6MET
Metallic Material Limits for API Equipment Used in High Temperature Applications
3rd
2022
G6MET03
$138.00
17
Guidelines for Design and Manufacture of Surface Wellhead Running, Retrieving and Testing
TR
6RT
1st
2020
G06RT1
$65.00
17
Tools, Clean-out Tools and Wear Bushings
Std
6X
Design Calculations for Pressure-Containing Equipment
2nd
2019
G06X02
$71.00
17
7-1/ISO 10424-
Spec
Specification for Rotary Drill Stem Elements
1st
2006
GX7101
$176.00
17
1:2004
7-1/ISO 10424-
Spec
Specification for Rotary Drill Stem Elements-Chinese
1st
2006
GX7101C
$176.00
17, 167
1:2004
7-1/ISO 10424-
Spec
Specification for Rotary Drill Stem Elements-Russian
1st
2006
GX7101R
$176.00
17, 172
1:2004
7-1/ISO 10424-
Spec
Specification for Rotary Drill Stem Elements-Spanish
1st
2006
GX7101SP
$176.00
17, 177
1:2004
Spec
7-2
Threading and Gauging of Rotary Shouldered Connections
2nd
2017
GX70202
$206.00
17
Spec
7-2
Threading and Gauging of Rotary Shouldered Connections-Russian
2nd
2017
GX70202R
$206.00
17, 172
TR
7CR
Cold Working Thread Roots with CNC Lathes for Rotary Shouldered Connections
1st
2020
G7CR01
$75.00
18
Std
7CW
Casing Wear Tests
1st
2015
G7CW01
$93.00
18
Spec
7F
Oil Field Chain and Sprockets
8th
2010
G7F008
$125.00
18
Spec
7F
Oil Field Chain and Sprockets-Chinese
8th
2010
G7F008C
$125.00
18, 167
RP
7G
Recommended Practice for Drill Stem Design and Operating Limits
16th
1998
G07G6A
$210.00
18
RP
7G
Recommended Practice for Drill Stem Design and Operating Limits-Kazakh
16th
1998
G07G6AK
$210.00
18, 169
RP
7G
Recommended Practice for Drill Stem Design and Operating Limits-Russian
16th
1998
G07G6AR
$210.00
18, 172
RP
7G-2
Inspection and Classification of Used Drill Stem Elements
2nd
2020
GX7G202
$167.00
18
RP
7HU1
Safe Use of 2-Inch Hammer Unions for Oilfield Applications
1st
2009
H7HU11
$40.00
18
Spec
7HU2
Oilfield Hammer Unions
1st
2022
H7HU21
$116.00
18
Spec
7K
Drilling and Well Servicing Equipment
6th
2015
G07K06
$217.00
19
Spec
7K
Drilling and Well Servicing Equipment-Russian
6th
2015
G07K06R
$217.00
19, 172
RP
7L
Procedures for Inspection, Maintenance, Repair, and Remanufacture of Drilling Equipment
1st
1995
G07L01
$118.00
19
Spec
7NRV
Specification for Drill String Non-Return Valves
1st
2006
G7NRV01
$76.00
19
Spec
7NRV
Specification for Drill String Non-Return Valves-Chinese
1st
2006
G7NRV01C
$76.00
19, 167
202
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
Recommended Practice for Procedures for Inspection, Maintenance, Repair, and Remanufacture
RP
8B
8th
2014
G08B08
$103.00
19
of Hoisting Equipment
Spec
8C
Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)
5th
2012
GX08C05
$152.00
20
Spec
8C
Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Chinese
5th
2012
GX08C05C
$152.00
20, 167
Spec
8C
Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Russian
5th
2012
GX08C05C
$152.00
20, 172
Spec
9A
Specification for Wire Rope
27th
2020
G9A027
$138.00
20
RP
9B
Application, Care, and Use of Wire Ropes for Oil Field Service
14th
2015
G9B014
$131.00
20
Spec
10A
Cements and Materials for Well Cementing
25th
2019
GX10A25
$163.00
20
Spec
10A
Cements and Materials for Well Cementing-Russian
25th
2019
GX10A25R
$163.00
20, 173
RP
10B-2
Recommended Practice for Testing Well Cements
2nd
2013
G10B202
$239.00
20
RP
10B-2
Recommended Practice for Testing Well Cements-Russian
2nd
2013
G10B202R
$239.00
21, 173
RP
10B-3
Testing of Well Cements Used in Deepwater Well Construction
2nd
2016
G10B32
$103.00
21
RP
10B-4
Preparation and Testing of Foamed Cement Formulations at Atmospheric Pressure
2nd
2015
G10B402
$103.00
21
10B-5/ISO
Recommended Practice on Determination of Shrinkage and Expansion of Well Cement
RP
1st
2005
GX10B501
$87.00
21
10426-5:2004
Formulations at Atmospheric Pressure
10B-6/ISO
RP
Recommended Practice on Determining the Static Gel Strength of Cement Formulations
1st
2010
GG10B601
$68.00
21
10426-6:2008
Spec
10D
Casing Bow-Spring Centralizers
7th
2021
G10D07
$107.00
21
10D-2/ISO
RP
Recommended Practice for Centralizer Placement and Stop Collar Testing
1st
2004
GG10D21
$83.00
21
10427-2:2004
Spec
10F
Cementing Float Equipment Testing
4th
2018
GX10F04
$81.00
21
Spec
10F
Cementing Float Equipment Testing-Russian
4th
2018
GX10F04R
$81.00
21, 173
RP
10G
Product Evaluation, Application, and Testing of Stage Cementing Collars
1st
2020
G10G01
$140.00
22
TR
10TR1
Cement Sheath Evaluation
2nd
2008
G10TR12
$157.00
22
TR
10TR1
Cement Sheath Evaluation-Kazakh
2nd
2008
G10TR12K
$157.00
22, 169
TR
10TR1
Cement Sheath Evaluation-Russian
2nd
2008
G10TR12R
$157.00
22, 173
TR
10TR2
Shrinkage and Expansion in Oilwell Cements
1st
1997
G10TR2
$133.00
22
TR
10TR2
Shrinkage and Expansion in Oilwell Cements-Russian
1st
1997
G10TR2R
$133.00
22, 173
TR
10TR3
Technical Report on Temperatures for API Cement Operating Thickening Time Tests
1st
1999
G10TR3
$171.00
22
TR
10TR3
Technical Report on Temperatures for API Cement Operating Thickening Time Tests-Russian
1st
1999
G10TR3R
$171.00
22, 173
TR
10TR4
Selection of Centralizers for Primary Cementing Operations
1st
2008
G10TR40
$67.00
22
TR
10TR4
Selection of Centralizers for Primary Cementing Operations-Kazakh
1st
2008
G10TR40K
$67.00
22, 169
TR
10TR4
Selection of Centralizers for Primary Cementing Operations-Russian
1st
2008
G10TR40R
$67.00
22, 173
TR
10TR5
Methods for Testing of Solid and Rigid Centralizers
1st
2008
G10TR50
$67.00
22
TR
10TR5
Methods for Testing of Solid and Rigid Centralizers-Kazakh
1st
2008
G10TR50K
$67.00
22, 169
TR
10TR5
Methods for Testing of Solid and Rigid Centralizers-Russian
1st
2008
G10TR50R
$67.00
22, 173
TR
10TR6
Evaluation and Testing of Mechanical Cement Wiper Plugs
1st
2015
G10TR601
$98.00
22
TR
10TR7
Mechanical Behavior of Cement
1st
2017
G10TR71
$128.00
23
RP
11AR
Recommended Practice for Care and Use of Subsurface Pumps
4th
2000
G11AR4
$135.00
23
Spec
11AX
Specification for Subsurface Sucker Rod Pump Assemblies, Components, and Fittings
13th
2015
G11AX13
$189.00
23
Spec
11AX
Specification for Subsurface Sucker Rod Pump Assemblies, Components, and Fittings-Russian
13th
2015
G11AX13R
$189.00
23, 173
Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod
Spec
11B
27th
2010
G11B27
$168.00
23
Clamps, Stuffing Boxes, and Pumping Tees
Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod
Spec
11B
27th
2010
G11B27C
$168.00
24, 168
Clamps, Stuffing Boxes, and Pumping Tees-Chinese
Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod
Spec
11B
27th
2010
G11B27R
$168.00
24, 173
Clamps, Stuffing Boxes, and Pumping Tees-Russian
RP
11BR
Recommended Practice for the Care and Handling of Sucker Rods
9th
2008
G11BR09
$114.00
24
RP
11BR
Recommended Practice for the Care and Handling of Sucker Rods-Chinese
9th
2008
G11BR09C
$114.00
24, 168
Spec
11D1
Packers and Bridge Plugs
4th
2021
G11D104
$136.00
40
Spec
11E
Pumping Units
20th
2022
G11E20
$202.00
24
RP
11ER
Guarding of Pumping Units
4th
2022
G11ER04
$96.00
24
RP
11G
Recommended Practice for Installation, Maintenance and Lubrication of Pumping Units
5th
2013
G11G05
$93.00
24
TR
11L
Design Calculations for Sucker Rod Pumping Systems (Conventional Units)
5th
2008
G11L05
$115.00
24
Bull
11L2
Bulletin on Catalog of Analog Computer Dynamometer Cards
1st
1969
G05700
$133.00
24
Bull
11L3
Sucker Rod Pumping System Design Book
1st
1970
G05800
$143.00
24
TR
11L6
Technical Report on Electric Motor Prime Mover for Beam Pumping Unit Service
2nd
2008
G11L602
$94.00
24
TR
11L6
Technical Report on Electric Motor Prime Mover for Beam Pumping Unit Service-Chinese
2nd
2008
G11L602C
$94.00
25, 168
Spec
11PL
Plunger Lift Lubricators and Related Equipment
1st
2019
G11PL01
$121.00
25
203
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
Recommended Practice for the Operation, Maintenance and Troubleshooting of Electric
RP
11S
3rd
1994
G11S03
$90.00
25
Submersible Pump Installations
RP
11S1
Electrical Submersible Pump Dismantle, Inspection and Failure Analysis
4th
2022
G11S14
$133.00
25
RP
11S2
Recommended Practice for Electric Submersible Pump Testing
2nd
1997
G11S22
$90.00
25
RP
11S2
Recommended Practice for Electric Submersible Pump Testing-Russian
2nd
1997
G11S22R
$90.00
25, 173
RP
11S3
Recommended Practice for Electrical Submersible Pump Installations
2nd
1999
G11S32
$97.00
25
RP
11S3
Recommended Practice for Electrical Submersible Pump Installations-Russian
2nd
1999
G11S32R
$97.00
25, 173
RP
11S4
Recommended Practice for Sizing and Selection of Electric Submersible Pump Installations
3rd
2002
G11S43
$86.00
25
RP
11S5
Recommended Practice for the Application of Electrical Submersible Cable Systems
2nd
2008
G11S52
$118.00
25
RP
11S6
Recommended Practice for Testing of Electric Submersible Pump Cable Systems
1st
1995
G11S61
$97.00
25
Recommended Practice on Application and Testing of Electric Submersible Pump Seal Chamber
RP
11S7
1st
1993
G05947
$97.00
26
Sections
RP
11S8
Recommended Practice on Electric Submersible System Vibrations
2nd
2012
G11S802
$84.00
26
Spec
12B
Specification for Bolted Tanks for Storage of Production Liquids
17th
2020
G12B17
$143.00
26, 102
Spec
12D
Specification for Field-Welded Tanks for Storage of Production Liquids
12th
2017
G12D12
$116.00
26, 102
Spec
12F
Specification for Shop-Welded Tanks for Storage of Production Liquids
13th
2019
G12F13
$146.00
26, 102
Spec
12J
Specification for Oil and Gas Separators
8th
2008
G12J08
$105.00
26
Spec
12J
Specification for Oil and Gas Separators-Chinese
8th
2008
G12J08C
$105.00
26, 168
Spec
12J
Specification for Oil and Gas Separators-Russian
8th
2008
G12J08R
$105.00
26, 173
Spec
12K
Specification for Indirect Type Oilfield Heaters
8th
2008
G12K08
$124.00
26
Spec
12K
Specification for Indirect Type Oilfield Heaters-Chinese
8th
2008
G12K08C
$124.00
26, 168
Spec
12L
Specification for Vertical and Horizontal Emulsion Treaters
5th
2008
G12L05
$105.00
27
RP
12N
Recommended Practice for the Operation, Maintenance and Testing of Firebox Flame Arrestors
2nd
1994
G12N02
$90.00
27
Spec
12P
Specification for Fiberglass Reinforced Plastic Tanks
5th
2022
G12P05
$129.00
27, 102
Std
12R1
Installation, Operation, Maintenance, Inspection, and Repair of Tanks in Production Service
6th
2020
G12R16
$157.00
27, 102
Spec
13A
Drilling Fluids Materials
19th
2019
G13A19
$205.00
27
RP
13B-1
Recommended Practice for Field Testing Water-Based Drilling Fluids
5th
2019
GX13B15
$190.00
27
RP
13B-2
Recommended Practice for Field Testing Oil-Based Drilling Fluids
5th
2014
G13B205
$222.00
28
RP
13B-2
Recommended Practice for Field Testing Oil-Based Drilling Fluids-Russian
5th
2014
G13B205R
$222.00
28, 173
RP
13C
Recommended Practice on Drilling Fluid Processing Systems Evaluation
5th
2014
G13C05
$146.00
28
RP
13D
Rheology and Hydraulics of Oil-Well Drilling Fluids
7th
2017
G13D07
$167.00
28
RP
13I
Laboratory Testing of Drilling Fluids
9th
2020
GX13I9
$288.00
28
RP
13J
Testing of Heavy Brines
5th
2014
G13J05
$141.00
28
RP
13K
Chemical Analysis of Barite
4th
2022
G13K04
$130.00
28
RP
13L
Training and Qualification of Drilling Fluid Technologists
2nd
2017
G13L02
$94.00
28
13M/ISO 13503-
RP
Recommended Practice for the Measurement of Viscous Properties of Completion Fluids
1st
2004
GX13M01
$107.00
29
1:2003
13M/ISO 13503-
RP
Recommended Practice for the Measurement of Viscous Properties of Completion Fluids-Russian
1st
2004
GX13M01R
$107.00
29, 173
1:2003
13M-4/ISO
Recommended Practice for Measuring Stimulation and Gravel-Pack Fluid Leakoff Under Static
RP
1st
2006
GG13M41
$62.00
29
13503-4:2006
Conditions
Procedure for Testing and Evaluating the Performance of Friction (Drag) Reducers in Aqueous-
TR
13M-5
1st
2018
G13M501
$89.00
29
based Fluid Flowing in Straight, Smooth Circular Conduits
13M-6/ISO
TR
Procedure for Measuring Leakoff of Completion Fluids Under Dynamic Conditions
1st
2020
G13M601
$110.00
29
13503-6:2012
Stress Corrosion Cracking of Corrosion Resistant Alloys in Halide Brines Exposed to Acidic
TR
13TR1
1st
2017
G13TR11
$135.00
29
Production Gas
TR
13TR3
Size Measurement of Dry, Granular Drilling Fluid Particulates
1st
2018
G13TR31
$103.00
29
Spec
14A
Specification for Subsurface Safety Valve Equipment
12th
2015
G14A12
$244.00
40
RP
14B
Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems
6th
2015
G14B06
$137.00
29
RP
14C
Analysis, Design, Installation, and Testing of Safety Systems for Offshore Production Facilities
8th
2017
G14C08
$249.00
30
Recommended Practice for Design and Installation of Offshore Production Platform Piping
RP
14E
5th
1991
G07185
$161.00
30
Systems
Recommended Practice for Design and Installation of Offshore Production Platform Piping
811-07185
RP
14E
5th
1991
$161.00
30, 168
Systems-Chinese
CN940
Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed
RP
14F
and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1, and Division 2
6th
2018
G14F06
$171.00
30
Locations
Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed
RP
14FZ
and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone
2nd
2013
G14FZ02
$303.00
30
2 Locations
204
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
Recommended Practice for Fire Prevention and Control on Fixed Open-Type Offshore Production
RP
14G
4th
2007
G14G04
$135.00
30
Platforms
RP
14J
Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities
2nd
2001
G14J02
$128.00
30
Spec
14L
Lock Mandrels and Landing Nipples
3rd
2020
GG14L03
$143.00
40
RP
15CLT
Recommended Practice for Composite Lined Steel Tubular Goods
1st
2007
G15CLT1
$90.00
31
Spec
15HR
High-Pressure Fiberglass Line Pipe
4th
2016
G15HR4
$119.00
31
Spec
15HR
High-Pressure Fiberglass Line Pipe-Russian
4th
2016
G15HR4R
$119.00
31, 174
Spec
15LE
Specification for Polyethylene Line Pipe (PE)
5th
2022
G15LE05
$110.00
31
Spec
15LF
Layflat Hose Assemblies for the Transport of Water in Oilfield Applications
1st
2021
G15LF1
$97.00
31
Spec
15LR
Specification for Low Pressure Fiberglass Line Pipe
7th
2001
G15LR7
$105.00
31
Spec
15LR
Specification for Low Pressure Fiberglass Line Pipe-Chinese
7th
2001
G15LR7C
$105.00
31, 168
Spec
15PX
Specification for Crosslinked Polyethylene (PEX) Line Pipe
2nd
2022
G15PX2
$108.00
31
Spec
15S
Spoolable Reinforced Plastic Line Pipe
3rd
2022
G15S03
$143.00
32
RP
15SA
Integrity Management of Spoolable Reinforced Line Pipe
1st
2022
G15SA01
$75.00
32
RP
15SIH
Installation and Handling of Spoolable Reinforced Line Pipe
1st
2021
G15SIH1
$75.00
32
RP
15TL4
Recommended Practice for Care and Use of Fiberglass Tubulars
3rd
2022
G15TL403
$105.00
32
RP
15WT
Operations for Layflat Hose in Oilfield Water Applications
1st
2019
G15WT1
$105.00
32
Spec
16A
Specification for Drill-Through Equipment
4th
2017
G16A04
$179.00
32
Std
16AR
Standard for Repair and Remanufacture of Drill-Through Equipment
1st
2017
G16AR01
$170.00
32
Spec
16C
Choke and Kill Equipment
3rd
2021
G16C03
$186.00
32
Spec
16D
Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment
3rd
2018
G16D03
$205.00
32
Spec
16F
Specification for Marine Drilling Riser Equipment
2nd
2017
G16F02
$150.00
33
Spec
16F
Specification for Marine Drilling Riser Equipment-Russian
2nd
2017
G16F02R
$150.00
33, 174
Bull
16H
Automated Safety Instrumented Systems for Onshore Blowout Preventer Actuation
1st
2022
G16H01
$75.00
33
RP
16Q
Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems
2nd
2017
G16Q02
$132.00
33
RP
16Q
Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems-Russian
2nd
2017
G16Q02R
$132.00
33, 174
Spec
16RCD
Specification for Rotating Control Devices
3rd
2022
G16RCD03
$168.00
33
RP
16ST
Coiled Tubing Well Control Equipment Systems
2nd
2021
G16ST02
$186.00
33
TR
16TR1
BOP Shear Ram Performance Test Protocol
1st
2018
G16TR11
$105.00
33
Design and Operation of Subsea Production Systems-General Requirements and
RP
17A
6th
2022
G17A06
$108.00
34
Recommendations
RP
17B
Recommended Practice for Flexible Pipe
5th
2014
G017B05
$249.00
34
Spec
17D
Specification for Subsea Wellhead and Tree Equipment
3rd
2021
G17D03
$222.00
34
Spec
17E
Specification for Subsea Umbilicals
5th
2017
G17E05
$210.00
34
Spec
17E
Specification for Subsea Umbilicals-Russian
5th
2017
G17E05R
$210.00
34, 174
Std
17F
Standard for Subsea Production Control Systems
4th
2017
G017F04
$262.00
34
Std
17G
Design and Manufacture of Subsea Well Intervention Equipment
3rd
2019
G17G03
$187.00
35
RP
17G1
Configuration and Operation for Subsea Well Intervention Systems
1st
2022
G17G101
$137.00
35
RP
17G3
Design of Subsea Well Intervention Systems Using Non-Ferrous Alloys
1st
2021
G17G301
$93.00
35
RP
17G5
Subsea Intervention Workover Control Systems
1st
2019
G17G501
$86.00
35
RP
17H
Remotely Operated Tools and Interfaces on Subsea Production Systems
3rd
2019
G17H03
$160.00
35
Spec
17J
Specification for Unbonded Flexible Pipe
4th
2014
G017J04
$146.00
35
Spec
17K
Specification for Bonded Flexible Pipe
3rd
2017
G17K03
$147.00
35
Spec
17L1
Specification for Ancillary Equipment for Flexible Pipes and Subsea Umbilicals
2nd
2021
G17L102
$203.00
36
RP
17L2
Recommended Practice for Ancillary Equipment for Flexible Pipes and Subsea Umbilicals
2nd
2021
G17L202
$203.00
36
Recommended Practice on Subsea Production System Reliability, Technical Risk, and Integrity
RP
17N
2nd
2017
G17N02
$193.00
36
Management
Recommended Practice on Subsea Production System Reliability, Technical Risk, and Integrity
RP
17N
2nd
2017
G17N02R
$193.00
36, 174
Management-Russian
RP
17O
Recommended Practice for Subsea High Integrity Pressure Protection Systems (HIPPS)
2nd
2014
G17O02
$131.00
36
RP
17P
Recommended Practice for Subsea Structures and Manifolds
2nd
2019
GG17P02
$150.00
36
RP
17Q
Recommended Practice on Subsea Equipment Qualification
2nd
2018
G17Q02
$145.00
36
RP
17R
Recommended Practice for Flowline Connectors and Jumpers
2nd
2022
G17R02
$131.00
36
RP
17S
Recommended Practice for the Design, Testing, and Operation of Subsea Multiphase Flow Meters
2nd
2022
G17S02
$98.00
37
TR
17TR1
Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes
1st
2003
G17TR11
$143.00
37
Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes-
TR
17TR1
1st
2003
G17TR11R
$143.00
37, 174
Russian
TR
17TR2
The Aging of PA-11 In Flexible Pipes
1st
2003
G17TR21
$110.00
37
205
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads Below the BOP
TR
17TR3
1st
2004
G17TR31
$143.00
37
Stack
An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads Below the BOP
TR
17TR3
1st
2004
G17TR31R
$143.00
37, 174
Stack-Russian
TR
17TR4
Subsea Equipment Pressure Ratings
2nd
2016
G17TR402
$71.00
37
TR
17TR4
Subsea Equipment Pressure Ratings-Russian
2nd
2016
G17TR402R
$71.00
37, 174
TR
17TR5
Avoidance of Blockages in Subsea Production Control and Chemical Injection Systems
1st
2012
G17TR501
$107.00
37
TR
17TR6
Attributes of Production Chemicals in Subsea Production Systems
1st
2012
G17TR601
$107.00
37
TR
17TR7
Verification and Validation of Subsea Connectors
1st
2017
G17TR71
$93.00
38
TR
17TR8
High-Pressure High-Temperature Design Guidelines
3rd
2022
G17TR803
$156.00
38
TR
17TR9
Umbilical Termination Assembly (UTA) Selection and Sizing Recommendations
1st
2017
G17TR91
$113.00
38
TR
17TR10
Subsea Umbilical Termination (SUT) Design Recommendations
1st
2015
G17TR101
$113.00
38
TR
17TR11
Pressure Effects on Subsea Hardware During Flowline Pressure Testing in Deep Water
1st
2015
G17TR111
$87.00
38
TR
17TR12
Consideration of External Pressure in the Design and Pressure Rating of Subsea Equipment
1st
2015
G17TR121
$103.00
38
TR
17TR13
General Overview of Subsea Production Systems
1st
2016
G17TR131
$131.00
39
TR
17TR16
Subsea Hydrocarbon Production Leak Detection Systems Using Process Data
1st
2022
G17TR1601
$97.00
39
RP
17U
Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment
1st
2015
G17U01
$81.00
39
Recommended Practice for Analysis, Design, Installation, and Testing of Safety Systems for
RP
17V
1st
2015
G17V01
$152.00
39
Subsea Applications
Recommended Practice for Analysis, Design, Installation, and Testing of Safety Systems for
RP
17V
1st
2015
G17V01R
$152.00
39, 174
Subsea Applications-Russian
RP
17W
Recommended Practice for Subsea Capping Stacks
2nd
2021
G17W02
$136.00
39
RP
17X
Recommended Practice for Subsea Pump Module Systems
1st
2021
G17X01
$104.00
39
Recommended Practice for Design, Testing, and Qualification of Subsea Chemical Injection
RP
17Y
1st
2022
G17Y01
$104.00
39
Delivery Systems
Product Life Cycle Management System Requirements for the Petroleum and Natural Gas
Std
18LCM
1st
2017
G18LCM1
$84.00
2
Industries
TR
18TR1
Guidance on Changes to API Q1, Ninth Edition
1st
2015
G18TR101
$71.00
2
TR
18TR4
Evaluation of Welding Requirements as Applicable to API Product Specifications
1st
2017
G18TR401
$131.00
2
19AC/ISO
Spec
Specification for Completion Accessories
1st
2016
G19AC01
$121.00
40
14998:2013
RP
19B
Recommended Practice for Evaluation of Well Perforators
3rd
2021
G019B3
$153.00
40
Measurement of and Specifications for Proppants Used in Hydraulic Fracturing and Gravel-
Std
19C
2nd
2018
GX19C02
$122.00
40
Packing Operations
Measurement of and Specifications for Proppants Used in Hydraulic Fracturing and Gravel-
Std
19C
2nd
2018
GX19C02R
$122.00
40, 174
Packing Operations-Russian
Spec
19CI
Downhole Chemical Injection Devices and Related Equipment
1st
2019
G19CI01
$162.00
40
RP
19D
Measuring Conductivity of Proppants
2nd
2021
GX19D02
$128.00
40
Spec
19G1
Side-Pocket Mandrels
2nd
2019
G19G12
$113.00
41
Spec
19G2
Flow-Control Devices for Side-Pocket Mandrels
2nd
2020
GX19G22
$185.00
41
19G3/ISO 17078-
Spec
Running Tools, Pulling Tools and Kick-Over Tools and Latches for Side-Pocket Mandrels
1st
2011
GG19G301
$157.00
41
3:2009
19G4/ISO 17078-
RP
Practices for Side-Pocket Mandrels and Related Equipment
1st
2011
GG19G401
$168.00
41
4:2010
RP
19GLHB
Gas Lift Handbook
1st
2020
G19GLHB01
$167.00
41
Spec
19ICD
Inflow Control Devices
1st
2020
G19ICD01
$100.00
41
Spec
19LH
Liner Hanger Equipment
1st
2019
G19LH01
$120.00
41
Spec
19OH
Openhole Isolation Equipment
1st
2018
G19OH1
$118.00
41
Spec
19OH
Openhole Isolation Equipment-Russian
1st
2018
G19OH1R
$118.00
42, 174
Spec
19PT
Downhole Perforating Tools
1st
2022
G19PT01
$86.00
42
19SS/ISO
Spec
Sand Screens
1st
2018
G19SS01
$174.00
42
17824:2009
Spec
19TT
Specification for Downhole Well Test Tools and Related Equipment
1st
2016
G19TT01
$143.00
42
Spec
19V
Subsurface Completion Isolation (Barrier) Valves and Related Equipment
2nd
2019
G19V02
$185.00
42
Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum
Spec
20A
2nd
2017
G20A02
$94.00
42
and Natural Gas Industry
Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum
Spec
20A
2nd
2017
G20A02
$94.00
42, 168
and Natural Gas Industry-Chinese
Spec
20B
Open Die Shaped Forgings for Use in the Petroleum and Natural Gas Industry
2nd
2020
G20B02
$102.00
43
Spec
20C
Closed Die Forgings for Use in the Petroleum and Natural Gas Industry
3rd
2020
G20C03
$97.00
43
Qualification of Nondestructive Examination Services for Equipment Used in the Petroleum and
Std
20D
2nd
2019
G20D02
$101.00
43
Natural Gas Industry
206
Publications by Number
To purchase individual API standards, visit apiwebstore.org
Pub
Number
Title
Edition
Date
Product Number
Price
Page(s)
Spec
20E
Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries
2nd
2017
G20E02
$93.00
43
Spec
20F
Corrosion-Resistant Bolting for Use in the Petroleum and Natural Gas Industries
2nd
2018
G20F02
$94.00
43
Std
20G
Welding Services for Equipment Used in the Petroleum and Natural Gas Industry
1st
2020
G20G01
$86.00
43
Heat Treatment Services-Batch Type for Equipment Used in the Petroleum and Natural Gas
Std
20H
2nd
2020
G20H02
$78.00
43
Industry
Qualification of Distributors of Metallic Materials for Use in the Petroleum and Natural Gas
Std
20J
2nd
2022
G20J02
$103.00
44
Industries
Std
20L
Qualification of Polymeric Seal Manufacturers for Use in the Petroleum and Natural Gas Industries
1st
2018
G20L01
$71.00
44
Qualification of Suppliers of Machining Services for Use in the Petroleum and Natural Gas
Std
20M
1st
2017
G20M01
$78.00
44
Industries
Heat Treatment Services-Continuous Line for Equipment Used in the Petroleum and Natural Gas
Std
20N
1st
2019
G20N01
$81.00
44
Industry
Additively Manufactured Metallic Components for Use in the Petroleum and Natural Gas
Std
20S
1st
2021
G20S01
$86.00
44
Industries
Additively Manufactured Polymer-Based Components for Use in the Petroleum and Natural Gas
Std
20T
1st
2022
G20T01
$86.00
44
Industries
TR
21TR1
Materials Selection for Bolting
1st
2019
G21TR101
$94.00
44
TR
21TR2
S-N Fatigue Design Guidelines and Test Data for Low-Alloy Steel Bolts
1st
2022
G21TR201
$94.00
44
RP
31A
Standard Form for Hardcopy Presentation of Downhole Well Log Data
1st
1997
G31A01
$105.00
45
RP
45
Recommended Practice for Analysis of Oilfield Waters
3rd
1998
G45003
$154.00
45
RP
49
Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide
3rd
2001
G49003
$96.00
49, 125
Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide-
49, 125,
RP
49
3rd
2001
G4903K
$96.00
Kazakh
169
Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide-
49, 125,
RP
49
3rd
2001
G04903R
$96.00
Russian
174
RP
50
Natural Gas Processing Plant Practices for Protection of the Environment
2nd
1995
G50002
$118.00
45
RP
51
Onshore Oil and Gas Production Practices for Protection of the Environment
3rd
2001
G51003
$56.00
45
45, 49,
RP
51R
Environmental Protection for Onshore Oil and Gas Production Operations and Leases
1st
2009
G51R01
See Listing
125
RP
52
Land Drilling Practices for Protection of the Environment
2nd
1995
G52002
$124.00
45
DR
53
Characterization of Exploration and Production Associated Wastes
1996
I00053
$147.00
161
Std
53
Well Control Equipment Systems for Drilling Wells
5th
2018
G05305
$164.00
33
RP
54
Occupational Safety and Health for Oil and Gas Well Drilling and Servicing Operation
4th
2019
G54004
$140.00
49, 125
Recommended Practice for Oil and Gas Producing and Gas Processing Plant Operations Involving
RP
55
2nd
1995
G55002
$124.00
49, 125
Hydrogen Sulfide
RP
59
Recommended Practice for Well Control Operations
2nd
2006
G59002
$133.00
33
RP
59
Recommended Practice for Well Control Operations-Kazakh
2nd
2006
G59002K
$133.00
34, 169
RP
59
Recommended Practice for Well Control Operations-Russian
2nd
2006
G59002R
$133.00
34, 174
Std
64
Diverter Equipment Systems
3rd
2017
G64003
$149.00
34
RP
65-1
Cementing Shallow-Water Flow Zones in Deepwater Wells
2nd
2018
G65102
$144.00
23
Std
65-2
Isolating Potential Flow Zones During Well Construction
2nd
2010
G65202
See Listing
23, 125
RP
65-3
Wellbore Plugging and Abandonment
1st
2021
G65301
$112.00
23, 125
RP
67
Recommended Practice for Oilfield Explosives Safety
3rd
2019
G06703
$121.00
49, 126
Recommended Practice for Oil and Gas Well Servicing and Workover Operations Involving
RP
68
1st
1998
G68001
$82.00
45
Hydrogen Sulfide
RP
70
Security for Offshore Oil and Natural Gas Operations
1st
2003
G07001
$62.00
52
RP
70I
Security for Worldwide Offshore Oil and Natural Gas Operations
1st
2004
G70I03
$67.00
52
RP
74
Recommended Practice for Occupational Safety for Onshore Oil and Gas Production Operation
1st
2001
G74001
$67.00
50, 126
Recommended Practice for Development of a Safety and Environmental Management Program for
50, 126,
RP
75
4th
2019
G07504
$110.00
Offshore Operations and Facilities
148
Guidance Document for the Development of a Safety and Environmental Management System for
Bull
75L
1st
2007
G75L01
$37.00
50, 126
Onshore Oil and Natural Gas Production Operations and Associated Activities
RP
76
Contractor Safety Management for Oil and Gas Drilling and Production Operations
2nd
2007
G07602
$62.00
50, 126
Risk-Based Approach for Managing Hydrocarbon Vapor Exposure During Tank Gauging, Sampling,
RP
77
1st
2018
G07701
$93.00
50
and Maintenance of Onshore Production Facilities
RP
80
Definition of Onshore Gas Gathering Lines
2nd
2020
G80002
$111.00
87
RP
85
Use of Subsea Wet-Gas Flowmeters in Allocation Measurement Systems
1st
2003
G08501
$134.00
76
RP
85
Use of Subsea Wet-Gas Flowmeters in Allocation Measurement Systems-Russian
1st
2003
G08501R
$134.00
76, 174
Recommended Practice for Field Analysis of Crude Oil Samples Containing from Two to Fifty
RP
87
1st
2007
G08701
$98.00
76
Percent Water by Volume
RP
90-1
Annular Casing Pressure Management for Offshore Wells
2nd
2021
G09002
$227.00
45
RP
90-2
Annular Casing Pressure Management for Onshore Wells
1st
2016
G090201
$197.00
45
207
|
||
|
|
|