|
|
(e) Turn the Techstream on. (f) Enter the following menus: Powertrain / Engine and ECT / Active Test. (g) According to the display on the Techstream, perform the Active Test. HINT: While driving, the shift position can be forcibly changed with the Techstream. Comparing the shift position commanded by the Active Test with the actual shift position enables you to confirm the problem
. Engine and ECT: TESTER DISPLAY TEST PART CONTROL RANGE DIAGNOSTIC NOTE Control the Shift Position Operate shift solenoid valve and set each shift position Press "→" button: Shift up Press "←" button: Shift down Possible to check operation of shift solenoid valves [Vehicle Condition] 50 km/h (30 mph) or less HINT: This test can be conducted when the vehicle speed is 50 km/h (30 mph) or less. ECM gear shift command 1st 2nd 3rd 4th 5th 6th Shift solenoid valve S1 OFF ON ON ON ON ON PROCEDURE 1. CHECK DTC OUTPUT (IN ADDITION TO DTC P0751) (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine and ECT / Trouble Codes. (e) Read the DTCs using the Techstream. Result RESULT PROCEED TO Only P0751 is output A P0751 and other DTCs are output B AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS... |