|
|
c. Turn the tester ON. d. Enter the following menus: Techstream - Select: Body Electrical / (desired system) / Trouble Codes. e. Read the DTCs. 2. CLEAR DTC a. Connect Techstream to the DLC3. b. Turn the ignition switch ON. c. Turn the tester ON. d. Enter the following menus: Techstream - Select: Body Electrical / (desired system) / Trouble Codes. e. Erase the DTCs. FAIL-SAFE CHART Speedometer: SPEEDOMETER FAIL-SAFE CHART Tachometer: TACHOMETER FAIL-SAFE CHART Engine coolant temperature gauge: ENGINE COOLANT TEMPERATURE GAUGE FAIL-SAFE CHART Condition Fail-safe Operation Fail-safe Deactivation Condition Vehicle speed pulse is Controls input signals as 0 km/h (0 Normal data is received Vehicle speed signal is Controls input signals as 0 km/h (0 Normal data is received Condition Fail-safe Operation Fail-safe Deactivation Condition Engine revolution signal is interrupted for 1.2 Controls input signals as 0 Normal data is received Condition Fail-safe Operation Fail-safe Deactivation Condition While ignition switch is ON, engine coolant Gauge needle Engine coolant temperature
2009 Toyota Tundra 2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
|