|
|
Content .. 1889 1890 1891 1892 ..
If any of the connecting rod cap bolts cannot meet the torque specification, replace the 2 Mark the front of the connecting cap bolt with paint 3 Tighten the cap bolts another 90° as shown below 4 Check that the painted marks are now at a 90° angle to the front Fig. 317: Identifying Painted Marks Angle To Front g Check that the crankshaft turns smoothly FRONT CRANKSHAFT OIL SEAL COMPONENTS
2009 Toyota Tundra 2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
|