|
|
C1708, C1709, C1710, C1711 TRANSMITTER (NO DATA) WT-23 < DTC/CIRCUIT DIAGNOSIS > C D F G H I J K L M A B WT N O P C1708, C1709, C1710, C1711 TRANSMITTER (NO DATA) DTC Logic INFOID:0000000009267461 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PERFORM SELF DIAGNOSTIC RESULT With CONSULT 1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes. 2. Stop the vehicle. 3. Perform “SELF DIAGNOSTIC RESULT”. YES >> Proceed to . NO >> Inspection End. Diagnosis Procedure INFOID:0000000009267462 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs Regarding Wiring Diagram information, refer to . 1. CHECK DATA MONITOR With CONSULT 1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes. 2. Stop the vehicle. 3. On “DATA MONITOR” select “AIR PRESS FL”, “AIR PRESS FR”, “AIR PRESS RR” and “AIR PRESS RL”. 4. Within 5 minutes after vehicle is stopped, read the values displayed on CONSULT. YES >> GO TO 2. NO >> GO TO 5. DTC Display Item Malfunction detected condition Possible causes C1708 [NO DATA] FL Tire pressure data signal from the front LH wheel • Harness or connector connec- tion malfunction • Transmitter ID registration in- complete • Transmitter malfunction C1709 [NO DATA] FR Tire pressure data signal from the front RH wheel C1710 [NO DATA] RR Tire pressure data signal from the rear RH wheel C1711 [NO DATA] RL Tire pressure data signal from the rear LH wheel |