When replacing BCM, save or print current vehicle specification with CONSULT-III configuration before
replacement.
NOTE:
If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection” after
replacing BCM.

AFTER REPLACEMENT

CAUTION:

• When replacing BCM, you must perform “WRITE CONFIGURATION” with CONSULT-III.
- Complete the procedure of “WRITE CONFIGURATION” in order.
- If you set incorrect “WRITE CONFIGURATION”, incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• When replacing BCM, perform the system initialization (NATS).

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Special Repair
Requirement

INFOID:0000000003809645

SAVING VEHICLE SPECIFICATION

CONSULT-III Configuration

Perform “READ CONFIGURATION” to save or print current vehicle specification. Refer to

BCS-3, "CONFIGU-

RATION (BCM) : Description"

NOTE:
If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection” after
replacing BCM.

>> GO TO 2.

REPLACE BCM

Replace BCM. Refer to

BCS-78, "Exploded View"

>> GO TO 3.

WRITING VEHICLE SPECIFICATION

CONSULT-III Configuration

Perform “WRITE CONFIGURATION - Config file” or “WRITE CONFIGURATION - Manual selection” to write
vehicle specification. Refer to

BCS-4, "CONFIGURATION (BCM) : Special Repair Requirement"

>> GO TO 4.

INITIALIZE BCM (NATS)

Perform BCM initialization. (NATS)

>> WORK END

CONFIGURATION (BCM)

CONFIGURATION (BCM) : Description

INFOID:0000000003809646

Vehicle specification needs to be written with CONSULT-III because it is not written after replacing BCM.

BCS-4

< BASIC INSPECTION >

INSPECTION AND ADJUSTMENT

Configuration has three functions as follows

NOTE:

Manual setting item: Items which need selection by vehicle specifications

Automatic setting item: Items which are written in automatically (Setting can not be changed)

CAUTION:

• When replacing BCM, you must perform “WRITE CONFIGURATION” with CONSULT-III.
• Complete the procedure of “WRITE CONFIGURATION” in order.
• If you set incorrect “WRITE CONFIGURATION”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• Never perform “WRITE CONFIGURATION” except for new BCM.

CONFIGURATION (BCM) : Special Repair Requirement

INFOID:0000000003809647

WRITING MODE SELECTION

CONSULT-III Configuration

Select “CONFIGURATION” of BCM.

When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.

PERFORM “WRITE CONFIGURATION - CONFIG FILE”

CONSULT-III Configuration

Perform “WRITE CONFIGURATION - Config file”.

>> WORK END

PERFORM “WRITE CONFIGURATION - MANUAL SELECTION”

CONSULT-III Configuration

Select "WRITE CONFIGURATION - Manual selection".

Identify the correct model and configuration list. Refer to

BCS-5, "CONFIGURATION (BCM) : Configura-

tion list"

Confirm and/or change setting value for each item.

Select "Setting change".

CAUTION:

Make sure to select “Setting change” even if the indicated configuration of brand new BCM is
same as the desirable configuration. If not, configuration which is set automatically by selecting
vehicle model can not be memorized.

When "COMMAND FINISHED", select "END".

>> GO TO 4.

OPERATION CHECK

Confirm that each function controlled by BCM operates normally.

>> WORK END

Function

Description

READ CONFIGURATION

• Reads the vehicle configuration of current BCM.
• Saves the read vehicle configuration.

WRITE CONFIGURATION - Manual selection

Writes the vehicle configuration with manual selection.

WRITE CONFIGURATION - Config file

Writes the vehicle configuration with saved data.

BCS

INSPECTION AND ADJUSTMENT

BCS-5

< BASIC INSPECTION >

CONFIGURATION (BCM) : Configuration list

INFOID:0000000003809648

⇔

: Items which confirm vehicle specifications

MANUAL SETTING ITEM

NOTE

Items

Setting value

AUTO LIGHT

WITH

—

RR FOG LAMP

WITH

—

AV C/U

WITH

⇔

WITHOUT

• WITH: With BOSE audio system
• WITHOUT: Without BOSE audio system

THEFT ALM AREA

MODE3

—

H/L WASHER TIME 1

WITH

—

H/L WASHER TIME 2

WITH

—

I-KEY

WITH

—

Key Fob Type

MODE10

—

HANDLE

LHD

—

AUTO SETTING ITEM

NOTE

Items

Setting value

H/L BULB

DEFAULT

—

FR FOG LAMP

WITH

—

TRANSMISSION

AT with ABS

—

TR CANCL SW

WITHOUT

—

TPMS WITHOUT

—

AUTO BACK DOOR

WITHOUT

—

FOG LAMP BULB

SINGLE BULB

—

DI LMP VARIAT

MODE4

—

LIGHT RECOG

MODE4

—

FR FOG LOGIC

MODE2

—

PANIC ALM TYPE

MODE2

—

HAZARD SW TYPE

MODE1

—

BCM AC CONTROL

MODE1

—

RAIN SENSOR

WITHOUT

—

FOG ON WITH AUTO LIGHT

WITHOUT

—

AUTO LOCK&UNLOCK FUNC

WITHOUT

—

DROP WIP FUNCTION

WITHOUT

—

SELECTIVE UNLOCK SETTING

WITHOUT

—

SEAT BLT WARN

WITHOUT

—

SPEED SNS WIP

WITH

—

Content .. 203 204 205 206 ..