|
|
RFD-18 REAR FINAL DRIVE ASSEMBLY 7. Set a suitable jack to rear final drive assembly. CAUTION: Do not place a suitable jack on the rear cover (aluminum 8. Remove the mounting bolts and nuts connecting to the suspen- CAUTION: Secure rear final drive assembly to a suitable jack while INSTALLATION Note the following, and installation is in the reverse order of removal. ● Refer to (R200 2-pinion) or each tightening torque. ● When installing breather hoses, refer to the figure. CAUTION: Make sure there are no pinched or restricted areas on the – For installation, the vehicle side end shall be inserted to suspen- ● When oil leaks while removing final drive assembly, check oil . PDIA0690E SDIA1970J PDIA0633E |